OMRON 3G3JV-A4004-A

SYSDRIVE JV SERIES AC INVERTER SHOWN AT ACTUAL SIZE - 128 mm (5.04 in.) Get with the best value at The SYSDRIVE JV Series of Micro Inverters delivers precise control without compromising panel space or your budget. • Easy to install and maintain • Optional DIN-rail bracket for quick rail mounting • Space-saving design ideal for new or retrofit panels • Easily mounted cooling fan can be adjusted to run only when the JV is running Easy to setup and program • Integrated, face-mounted speed potentiometer for quick start up after power is applied • Quick-start LEDs for easy programming • Communication options include RS-232C/485 • Multi-step speed control for up to nine steps, UP/DOWN operation, and jog operation Outstanding price/performance relationship • Ideal for simple, low horsepower speed control applications • Excellent starting torque of 150% at 3Hz • Virtually immune to overload • Consistent performance despite changing conditions • Full-range automatic torque boost • Slip compensation Wiring Diagram DC Reactor (optional) _ +2 • U/T1 R/L1 V/T2 IM R/L2 3G3JV W/T3 R/L3 S1 Multi-function I/O support S2 Multi-function • Supports analog inputs of 0 to 10V, 4 to 20 mA, or 0 to 20 mA S3 Input S4 • Supports an analog monitor output and a digital output S5 MA • Accepts both PNP and NPN inputs MB Multi-function +24V (PNP) Relay Output MC SW7 Common SC Protection for your machinery AM Analog Monitor • A high-speed current limiting function minimizes over-current 0V (NPN) Output trips (above 250% of rated current) AC Analog Monitor Output Common • Quick restarts after momentary power loss FS (+12V, 20mA) V (0-10v) SW8 Frequency I (4-20 mA) FR Reference P • Stall prevention and fault retry functions FC (0V) • Overtorque detection • UL recognized electronic thermal overload Note: Connect single-phase 230 VAC to terminals R/L1 • Inrush current suppression and ground fault protection and S/L2 of the 3G3JV-AB�. The JV Series meets international UL, cUL and CE standards for Global Global global application coverage. Construction Construction Specifications Voltage Class 230 VAC single-/ 3-phase 460 VAC 3-phase MODEL 3-phase A2001-A A2002-A A2004-A A2007-A A2015-A A2022-A A2037-A A4002-A A4004-A A4007-A A4015-A A4022-A A4037-A Part Numbers 3G3JV- Single-phase AB001-A AB002-A AB004-A AB007-A AB015-A – – – – – – – – Max. Applicable 0.13 0.25 0.5/.75 1 2 3 5 0.5 1 1.5/2 3 3.5 5 1 Motor Output* HP (kW) (0.1) (0.2) (0.4) (0.75) (1.5) (2.2) (3.7) (0.2) (0.4) (.75) (1.5) (2.2) (3.7) Inverter Capacity (kVA) 0.3 0.6 1.1 1.9 3.0 4.2 6.7 0.9 1.4 2.6 3.7 4.2 6.5 Rated Output Current (A) 0.8 1.6 3 5 8 11 17.5 1.2 1.8 3.4 4.8 5.5 8.6 Max. Output Voltage (V) 3-phase, 200 to 230 V (proportional to input voltage) 3-phase, 380 to 460 V (proportional to input voltage) Max. Output Frequency (Hz) 400 Hz (Programmable) Rated Input Voltage 3-phase, 200 to 230 V, 50/60Hz 3-phase, 380 to 460 V, 50/60Hz and Frequency Single-phase, 200 to 240 V, 50/60Hz Allowable Voltage Fluctuation -15% to +10% Allowable Frequency Fluctuation ±5% Control Method Sine wave PWM (V/f control) Frequency Control Range 0.1 to 400 Hz Frequency Accuracy Digital reference: ±0.01% 14 to 122˚F (-10 to +50˚C) (Temperature Change) Analog reference: ±0.5% 59 to 95˚F (25±10˚C) Frequency Setting Digital reference: 0.01 Hz (less than 100 Hz)/1 Hz (100 Hz or more) Resolution Analog reference: (0:06/60 Hz) equivalent to 1/1000 of max. output frequency Output Frequency Resolution 0.01 Hz Overload Capacity 150% rated output current for one minute Frequency Reference Signal 0 to 10 VDC (20 kΩ), 4 to 20 mA (250 Ω), 0 to 20 mA (250 Ω) frequency setting volume (selectable) Accel/Decel Time 0.1 to 999 sec. (accel./decel. time are independently programmed) 2 \ Braking Torque Short-term average deceleration torque* 0.13 HP, 0.25 HP: 150%; 0.5 HP, 1 HP: 100%; 2 HP: 50%; 3 HP or more: 20% Continuous regenerative torque: Approx. 20% V/f Characteristics Possible to program any V/f pattern Motor Overload Protection Electronic thermal overload relay Instantaneous Overcurrent Motor coasts to a stop at approximately 250% of inverter rated current Overload Motor coasts to a stop after 1 minute at 150% of inverter rated output current Overvoltage Motor coasts to a stop if DC bus voltage exceed 410 V Motor coasts to a stop if DC bus voltage exceeds 820 V Undervoltage Stops when DC bus voltage is approximately 200 V or less Stops when DC bus voltage is approximately 400 V or less (approx. 160 V or less for single-phase series) Momentary Power Loss Stops if power loss is 15 ms or more. By setting inverter, operation can be continued if power is restored within approximately 0.5 s Cooling Fin Overheat Protected by electronic circuit Stall Prevention Level Individual levels during acceleration/running, enable/disable provided during deceleration Cooling Fan Fault Protected by electronic circuit (fan-stalling detection) Ground Fault Protected by electronic circuit (rated output current level) Power Charge Indication RUN lamp stays ON or digital operator LED stays ON. (Charge LED is provided for 460 V) ON until the DC bus voltage becomes 50 V or less Cooling Method Cooling fan is provided for: 230 V, 1 HP (3-phase) 460 V, 2 HP (single-phase), other models are self-cooling Enclosure Open chassis IP20 Ambient Temperature Open chassis: 14 to 122˚F (-10 to +50˚C) (not frozen) Humidity 95% RH or less (non-condensing) 3 Storage Temperature* -4 to 140˚F (-20 to +60˚C) Location Indoor (free from corrosive gases or dust) Elevation 3280 ft (1000 m) or less Vibration Up to 9.8 m/S2 (1 G) at less than 20 Hz, up to 2 m/S2 (0.2 G) at less than 20 to 50 Hz Wiring Distance 328 ft (100 m) or less between Inverter and Motor Four of the following input signals are selectable: Reverse run (3-wire sequence), fault reset, external fault (NO/NC contact input), multi-step speed operation, Jog command, accel/decel time select, external baseblock (NO/NC contact input), speed search Multi-function command, accel/decel hold command, LOCAL/REMOTE selection, communication/control circuit terminal selection, emergency Input stop fault, emergency stop alarm. Following output signals are selectable (1 NO/NC contact output): Fault, running, zero speed, at frequency, frequency detection Multi-function (output frequency ≤ or ≥ set value), during overtorque detection, minor error, during baseblock, operation mode, inverter run Output ready, during fault retry, during under-voltage, during speed search, data output through communication. Full-range automatic torque boost, slip compensation, DC injection braking current/time at start/stop frequency reference bias/gain, frequency reference with built-in potentiometer, MEMOBUS communications (RS-485/422, max. 19.2 K bps) capable Standard Functions with optional unit. *1: Based on a standard 4-pole motor for max. applicable motor output. Select the inverter model within the allowable motor rated current *2: Shows deceleration torque for uncoupled motor decelerating from 60 Hz with the shortest possible deceleration time *3: Temperature during shipping (for short period) Environmental Output Other Functions Protective Functions Control Characteristics Power Supply Conditions Characteristics Output Input Signals Signals Dimensions Rated Voltage Rated Output Nominal Part Number Overall Dimensions Approx. Weight Current (A) HP * (HXWXD) inches (mm) lb (kg) 5.04x2.68x2.76 0.8 0.13 3G3JV-AB001-A 1.1 (0.5) (128x68x70) 5.04x2.68x2.76 1.6 0.25 3G3JV-AB002-A 1.1 (0.5) (128x68x70) 230 VAC 5.04x2.68x4.41 3 0.75 3G3JV-AB004-A 1.98 (0.9) Single-Phase (128x68x112) 5.04x4.25x5.08 5 1 3G3JV-AB007-A 3.31 (1.5) (128x108x129) 5.04x4.25x6.06 8 2 3G3JV-AB015-A 3.31 (1.5) (128x108x154) 5.04x2.68x2.76 0.8 0.13 3G3JV-A2001-A 1.1 (0.5) (128x68x70) 5.04x2.68x2.76 1.6 0.25 3G3JV-A2002-A 1.1 (0.5) (128x68x70) H 5.04x2.68x4.16 3 0.75 3G3JV-A2004-A 1.76 (0.8) (128x68x102) 230 VAC 5.04x2.68x4.8 5 1 3G3JV-A2007-A 1.98 (0.9) 3-Phase (128x68x122) 5.04x4.25x5.08 8 2 3G3JV-A2015-A 2.83 (1.3) (128x108x129) W 5.04x4.25x6.06 11 3 3G3JV-A2022-A 3.31 (1.5) (128x108x154) 5.04x5.04x6.34 17.5 5 3G3JV-A2037-A 4.63 (2.1) (128x128x161) 5.04x2.68x3.19 1.2 0.5 3G3JV-A4002-A 2.20 (1.0) (128x108x81) 5.04x4.25x3.90 1.8 1 3G3JV-A4004-A 2.42 (1.1) (128x108x99) 5.04x4.25x5.08 3.4 2 3G3JV-A4007-A 3.31 (1.5) 460 VAC (128x108x129) 3-Phase 5.04x4.25x6.06 4.8 3 3G3JV-A4015-A 3.31 (1.5) (128x108x154) 5.04x4.25x6.06 0.33 in 5.5 3.5 3G3JV-A4022-A 3.31 (1.5) (128x108x154) 8.5 mm 5.04x5.51x6.34 D 8.6 5 3G3JV-A4037-A 6.62 (2.1) (128x140x161) *Nominal HP ratings based on standard 1800 RPM motor amperage. Select the inverter model within the allowable motor rated current. Use of high efficiency motors and motors of different base speeds may increase/decrease the applicable motor HP. H 0.33 in 8.5 mm W D UNITED STATES REGIONAL SALES OFFICES 800.55.OMRON or 847.843.7900 www.omron.com/oei CANADA REGIONAL SALES OFFICE OMRON ELECTRONICS, INC. Industrial Automation Division Toronto 416.286.6465 Schaumburg, IL BRAZIL SALES OFFICE OMRON IDM CONTROLS, INC. Houston, TX Sao Paulo 55.11.5564.6488 800.395.4106 or 713.849.1900 ARGENTINA SALES OFFICE OMRON CANADA, INC. Buenos Aires 54.114.787.1129 Scarborough, Ontario 24 Hour Control Fax United States 847.843.1963 Canada 877.599.4264 ©2000 OMRON ELECTRONICS, INC. SB JVSERIES-1 3/00/20M, 6.5M, 5M