Embedded Network Enabler Solutions Total Solution for Industrial Device Networking NE-4100 Series 100Mbps Embedded Network Enabler for Serial Devices Features • Ready-to-go Serial-to-Ethernet module to network enable any serial (RS-232/422/485, TTL) device • 10/100 Mbps Ethernet interface, 115.2 Kbps Serial interface • Supports TCP Server/Client, UDP and Real COM operation modes • Supports DHCP, BootP, Static IP and ARP • Supports SNMP and Email Alert function for event trapping and notification • Half the size of a credit card, only 57 × 40 mm • Single +5V input, 1.5W low power consumption • C-programmable version available upon request NE-4110S NE-4120S NE-4110A NE-4120A NE-4100T SNMP and Email Alert for Event Trap/Notification MOXA NE-4100 Series Network Enablers are designed for NE-4100 Series will send SNMP trap or Emails when the fol- manuafacturers who want to add sophisticated network lowing conditions occur: connectivity to their products. Any device with a standard • Cold/Warm start • IP Setting changes serial interface can now connect to Ethernet through Moxa • Password authentication fails • Password changes Network Enablers in a snap. NE-4110 Series provides a 10/ • DSR/DCD line signal changes 100 Mbps Ethernet interface with ready-to-use TCP Server/ Client and UDP, and a Real COM driver is also included for backward compatibility with the original software. Typical Installation Examples Stand-alone Type Stand-alone Type Drop-in Type (RJ45 Ethernet, NE-4110 Series) (Pin header Ethernet, NE-4110 Series) (Dual-in-line pin header, NE-4100T) 1-4 e-mail:info@moxa.com.tw www.moxa.com e-mail:info@moxa.com.tw www.moxa.com NE-4100 Series NE-4100 Series Embedded Network Enabler Solutions Total Solution for Industrial Device Networking Specifications Stop Bits: 1, 1.5, 2 Form Factor Type: Flow Control: RTS/CTS, XON/XOFF NE-4110/4120 Series: Stand-alone module, ready-to-go Speed: 50 bps to 115.2 Kbps NE-4100T: 26-pin dual-in-line package Digital I/O Pins 100Mbps Embedded Network Enabler for Serial Devices Dimensions: Four programmable IO pins (GPIO) NE-4110/4120 Series: 57 × 40 mm Software Features NE-4100T Series: 45 × 36 mm Protocols: ICMP, ARP, IP, TCP, UDP, DHCP, Telnet, HTTP, SNMP, LAN Interface SMTP Type: 10/100 Mbps auto-sensing Operation Modes: TCP Server, TCP Client, UDP, Protection: 1.5 KV isolation Real COM Driver (supporting Windows 98/NT/2000/XP) Connector: NE-4110 Series: RJ45 connector Management NE-4120 Series: 5-pin Pin Header Management Tools: Windows Administration Utility, Web Serial Interface browser, telnet console, serial console, and NECI (.DLL) for Port 1: developing users’ own management utility NE-4110S/4120S: RS-232 SNMP trap: Cold/Warm start, IP setting changed, Password NE-4110A/4120A: RS-485 (2-wire) or RS-485 (4-wire) authentication failure, Password changed, DSR/DCD line NE-4100T: serial (TTL) signal changed Port 2: serial (TTL) console port Power Requirements Serial Signals Power input: 5 VDC, +/- 5% RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND Power consumption: 290 mA @ 5 VDC (max.) RS-422: Tx+, Tx-, Rx+, Rx-, GND Temperature/Humidity RS-485: Data+, Data-, GND with ADDC™ Operation: 0 to 70°C (32 to 158°F), 5 to 95% RH (Automatic Data Direction Control) Storage: -20 to 85°C (-4 to 185°F), 5 to 95% RH TTL (Port 1): TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND Regulatory Approvals TTL (Port 2): TxD, RxD, GND FCC Class A, CE Class A Serial Parameters Warranty Parity: None, Even, Odd, Space, Mark 5 years Data Bits: 5, 6, 7, 8 Block Diagram NE-4110 Series Block Diagram NE-4100T Block Diagram NE-4120 Series Block Diagram User Programmable version NE-4100 Series provides a special C-pro- grammable version upon request, allowing device manufacturers to fully customize the function of NE-4100 Series. Please visit Moxa web site for more detailed information. e-mail:info@moxa.com.tw www.moxa.com e-mail:info@moxa.com.tw www.moxa.com 1-5 Embedded Network Enabler Solutions Total Solution for Industrial Device Networking 100 Mbps NE-4110/4120 Series Pin Assignments and Dimensions NE-4110S/4110A NE-4120S/4120A J3 1� 8� Ethernet Pin-header 1 Tx+ 2 Tx- PIN Signal 3 1 Tx+ 4 Rx+ 2 Tx- 5 Rx- 3 Rx+ 6 Rx- NE-4110S/4120S NE-4110/4120 Series NE-4100T Pin Assignments J2 J1 Pin No. Signal Pin No. Signal GND 14 13 VCC(+5V) 14 PIO0 1 ETx+ NC 10 9 NC 15 PIO1 2 ETx- GND 12 11 VCC(+5V) CTS0 8 7 RTS0 16 PIO2 3 ERx+ DIO0 10 9 10M_LED 17 PIO3 DSR0 6 5 GND 4 ERx- DIO1 8 7 100M_LED 18 LED 100M 5 LED 10M DTR0 4 3 TxD0 19 DCD0 6 TxD0 DIO2 6 5 Ready_LED RxD0 2 1 DCD0 20 DSR0 7 RxD0 DIO3 4 3 Reset 21 DTR0 8 RTS0 22 GND TxD1 2 1 RxD1 9 CTS0 23 Ready LED 10 Reset NE-4110A/4120A 24 +5V 11 GND J1 25 +5V 12 GND 45(1.77) 26 RxD1 13 TxD1 NC 10 9 NC Unit: mm (inch) NC 8 7 NC * For 2-wire RS-485 mode, NC 6 5 GND Pin 3 is Data+, Pin 4 is Data- (45 × 36 mm, 26-pin DIL package, 2.54 mm pitch) RxD- 4 3 RxD+ TxD+ 2 1 TxD- Get Going with Moxa’s Starter Kit Cross-wired Null Modem Power Cord Ethernet Cable Cabel (US or Euro plug) The MOXA Network Enabler Starter Kit lets you evaluate all Network Enabler functions right away. It supplies an application board, power adaptor, Ethernet and serial cables, and software CD-ROM. The application board is equipped with serial, Ethernet, digital I/O, and power circuits that help you evaluate the Network Enabler modules. Software CD and Application Power Adaptor Network Documentation Board (90 to 240 VAC, 12 VDC) Enabler 1-6 e-mail:info@moxa.com.tw www.moxa.com e-mail:info@moxa.com.tw www.moxa.com NE-4100 Series 36(1.42) NE-4100 Series Embedded Network Enabler Solutions Total Solution for Industrial Device Networking Application Board for NE-4110S/A Starter Kit 10/100M 12-48 VDC NE-4110S or 4110A Ethernet Power circuit Customization Area DIO mode and status settings LED area DIO terminal block RS-232 RS-485 Reset RS-232 console port terminal blocks Application Board for NE-4100T Starter Kit 10/100M NE-4110S or 4110A Ethernet Customization Area 12-48 VDC Power circuit DIO mode and status settings LED area DIO terminal bolck RS-232 RS-485 RS-232 Reset console port terminal blocks Data port Ordering Information NE-4110S: 100 Mbps Network Enabler for RS-232 devices, with RJ45 Ethernet connector NE-4110A: 100 Mbps Network Enabler for RS-422/485 devices, with RJ45 Ethernet connector NE-4120S: 100 Mbps Network Enabler for RS-232 devices, with 5-pin Ethernet pin header NE-4120A: 100 Mbps Network Enabler for RS-422/485 devices, with 5-pin Ethernet pin header NE-4100T: 100 Mbps Network Enabler for TTL devices, with DIL package NE-4110S-ST: Starter Kit for NE-4110S NE-4100T-ST: Starter Kit for NE-4100T NE-4110A-ST: Starter Kit for NE-4110A *To order the programmable version of the NE-4100 Series module, add ”-P” to the end of the model name. The available programmable models are NE-4110S-P, NE-4110A-P, NE-4120S-P, NE-4120A-P, NE-4100T-P. 1-7 e-mail:info@moxa.com.tw www.moxa.com e-mail:info@moxa.com.tw www.moxa.com