CN2510/2610 Async Server Total Solution for Industrial Device Networking CN2510 Series 8/16-Port RS-232 Async Servers Features • LCM interface for easy on-site management • Console Management for Router, PBX, Server • Stand-alone Remote Access Server for up to 16 dial-in users • PPP/SLIP with RADIUS authentication and RIP I/II Routing protocol • Real COM/TTY driver for Windows and Linux • Connect up to 16 serial Terminals to a UNIX host with 1 IP Address • SNMP MIB II for network management • ASPP or Standard BSD for Socket Programming • ±48 VDC for Telecom Applications Remote device Console Management For most companies, the performance of IT equipment plays a decisive role in daily operation. To keep a server, router, PBX, or leased line modem working properly, least downtime and instant troubleshooting is important. Most IT devices with screen and keyboard use KVM for in-band management. However, an RS-232 console is often used as a last resort for all devices. CN2510 provides an easy-to-use console port management solution that comes in a convenient 1U rack-mountable size. CN2510 can easily establish a console management environment with its RS-232 serial ports, which connect to the console ports of Unix servers or network equipment, such as routers. CN2510 turns the RS-232 console port of the device into a network-accessible node, allowing you to use Application: Console Management Telnet to configure and manage the device from anywhere on the network. In-Band and Out-of-Band Network Management devices to CN2510, you can access the devices with a specific In-Band Network Management refer to using Telnet IP:Port combination. This allows you to monitor and manage over a local LAN to open connections to devices that have a the devices from anywhere in your company over an Ethernet serial console port. By linking the RS-232 console ports of the or Wireless LAN network. e-mail:info@moxa.com.tw www.moxa.com e-mail:info@moxa.com.tw www.moxa.com CN2510 Series CN2510 Series CN2510/2610 Async Server Total Solution for Industrial Device Networking home. When an emergency arises, you can use the alternative Out-of-Band Network Management refers to when communication medium to access, and then reboot or an alternate path for remote access, such as a dial-up line reconfigure the devices remotely. This is particularly useful for or ISDN line, is used to reach network devices. Out-of-Band high traffic devices such as routers or PBXs. network management is used when you’re traveling or at Stand-alone RAS Service CN2510 supports PPP/SLIP dial-up ports, letting you connect From a hardware point of view, CN2510 is easy to install, to your network devices from a remote location. Even when and is complemented by CN2510’s powerful software you are out of the office, you will still have full control of all functions, including security, authorization, IP routing, and devices in your corporate data center or control room. management functions that provide MIS personnel with a simple and convenient way to monitor and control target devices located in a data center or control room. Security Functions Callback User Authentication When using dial-up out-of-band network manegement, This feature is important for validating privileges of users who CN2510 provides a convenient callback function to reverse attempt to gain access to console ports. The authentication dial to management hosts. This helps ensure that only procedure requires a user name and password that can be registered users or hosts can access the network remotely checked against the CN2510 database or RADIUS server. via CN2510. Moreover, the callback function makes it easier to consolidate long distance phone costs, and provides an added convenience to managers when they need to access the network from home. Added Features • Windows Real COM Port Driver • 15 KV Surge Protection for all signals • Linux Real TTY Drivers supported • Suitable as a Terminal Server • Unix based Fixed TTY driver • Suitable as a Serial Printer Server CN2510 Appearance LCM Display Panel LED Indicators Rest Button System status, Serial Tx/Rx Push Buttons Ethernet RJ45 10/100 Mbps Serial Ports RS-232 Console Port RJ45 (8-pin), RS-232, 50 bps to 230.4 Kbps Power Input AC: 100-240 VAC input, 47-63 HZ Connection Cable DC: ±48 VDC (38 to 72 VDC, -38 to -72 VDC) RJ45 8-pin to DB9 Cable 19-inch Rackmount The Rackmount Kit is a Standard accessory e-mail:info@moxa.com.tw www.moxa.com e-mail:info@moxa.com.tw www.moxa.com CN2510/CN2610 Async Server Total Solution for Industrial Device Networking Dimensions 48 VDC 100-240 VAC Optional Accessories RJ45 to DB-type cables CBL-RJ45M25-150 CBL-RJ45M9-150 8-pin RJ45 to Male DB25, 150 cm 8-pin RJ45 to Male DB9, 150 cm CBL-RJ45F9-150 CBL-RJ45F25-150 8-pin RJ45 to Female DB9,150 cm 8-pin RJ45 to Female DB25,150 cm RJ45 RS-232 port pin asignment PIN RS-232 PIN RS-232 5 RxD (in) 1 DSR (in) 1� 8� 6 DCD (in) 2 RTS (out) 7 CTS (in) 3 GND 4 TxD (out) 8 DTR (out) e-mail:info@moxa.com.tw www.moxa.com e-mail:info@moxa.com.tw www.moxa.com CN2510 Series CN2510 Series CN2510/CN2610 Async Server Total Solution for Industrial Device Networking Specifications Dial-on-Demand Hardware Security: RADIUS, Dialback, PAP, CHAP, Local user / password Kernel Management: SNMP MIB-II CPU: 32 bit RISC IP routing: Static, RIP-I, RIP-II. RAM: 4 MB Programming Flash ROM: 2 MB Real COM/TTY Driver: Windows 9x/NT/ME/2K/XP/2003, I/O controller: 16C550C Compatible UART Linux (kernel 2.2.x, 2.4.x) LAN Fixed TTY Driver: SCO OpenServer 5, SCO Unixware 7.x, LAN: 10/100 Mbps, 8-pin RJ45 Linux (kernel 2.2.x , 2.4.x) Protection: Built-in 1.5 KV magnetic isolation Moxa ASPP: Windows 9x/NT/ME/2K/XP/2003, Linux, No. of ports: 1 all UNIX based on socket support Serial Interface Socket: Standard BSD Socket interface Interface: RS-232, 8-pin RJ45 No. of ports: 16 ports (CN2510-16), 8 ports (CN2510-8) Applications Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND Terminal Sessions: 8 sessions per port Console Port: 1 RS-232 console port (RJ45, 8-pin) Power Requirments Power Input: Serial Line protection: AC: 100 to 240V, 47 to 63 Hz 15 KV ESD for all signals DC: ±48 VDC (38 to 72 VDC, -38 to -72 VDC) Power Line protection: Power Consumption: 4 KV Burst (EFT), EN61000-4-4 CN2510-8/16: 235 mA for 100V, 145 mA for 240V 2 KV Surge, EN61000-4-5 CN2510-8/16-48V: 260 mA (at 48V max.) Serial Communication Parameters Environment Parity: None, Even, Odd, Space, Mark Operating Temperature: Data bits: 5, 6, 7, 8 0 to 55°C (32 to 131°F), 5 to 95% RH Stop bit: 1, 1.5, 2 Storage Temperature: Flow control: RTS/CTS, XON/XOFF -40 to 85°C (-4 to 167°F), 5 to 95% RH Speed: 50 bps to 230.4 Kbps Regulatory Approvals Software EMC: FCC Class A, CE Class A Protocols: TCP/IP, UDP, ICMP, NetBUEI, DHCP, PPP, SLIP, CSLIP Safety: UL, CUL, TÜV Applications: Telnet, rlogin, rtelnet, DNS, LPD, RCP, WINS, Ordering Information CN2510-8 Optional Cables CBL-RJ45M9-150: RJ45 8-pin to DB9 Male cable, 150 cm 8-port RS-232 Async Server, 100 to 240 VAC power input CBL-RJ45F9-150: RJ45 8-pin to DB9 Female cable, 150 cm CN2510-16 CBL-RJ45M25-150: RJ45 8-pin to DB25 Male cable, 150 cm 16-port RS-232 Async Server, 100 to 240 VAC power input CBL-RJ45F25-150: RJ45 8-pin to DB25 Female cable, 150 cm CN2510-8-48V V2 8-port RS-232 Async Server, ±48 VDC power input CN2510-16-48V V2 16-port RS-232 Async Server, ±48 VDC power input All items include: • CN2510 Quick installation Guide • Document and software CD-ROM • Power Cord x 1 (included with AC version of the product) • CBL-RJ45F9-150 x 1 • CBL-RJ45M25-150 x 1 e-mail:info@moxa.com.tw www.moxa.com e-mail:info@moxa.com.tw www.moxa.com