MVME2600 - MOTOROLA - Industrial Trading

Description

Motorola MVME2600 Series VME Processor Modules - MPC60x class of microprocessors, Up to 512MB ECC DRAM on-board memory, 8MB on-board Flash, 1MB socketed, 64-bit PCI mezzanine, On-board debug monitor, 8- or 16-bit Fast SCSI-2 bus interface, Parallel, floppy, keyboard, and mouse interfaces

Part Number

MVME2600

Price

Request Quote

Manufacturer

MOTOROLA

Lead Time

Request Quote

Category

Single Board Computers

Specifications

[Asynchronous Serial Ports] Async Baud rate, bps max.

38.4K EIA-232, 115Kb/s raw

[Asynchronous Serial Ports] Configuration

EIA-232 DCE/DTE
EIA-574 DTE

[Asynchronous Serial Ports] connector

Routed to P2, DB-25 on MVME712M
Routed to P2, DB-9 on MVME761

[Asynchronous Serial Ports] Controller

PC87308
PC87308, 85230/8536

[Asynchronous Serial Ports] Model

MVME712M
MVME761

[Asynchronous Serial Ports] Number of Ports

two, 16550 compatible
Two, 16550 compatible and one 85230/8536

[Board Size] Depth

160.0 mm (6.3 in.)

[Board Size] Front Panel Height

261.8 mm (10.3 in.)

[Board Size] Height

233.4 mm (9.2 in.)

[Board Size] Max. Component Height

14.8 mm (0.58 in.)

[Board Size] Width

19.8 mm (0.8 in.)

[Counters/Timers] Real-Time Timers/Counters

Four, 32-bit programmable

[Counters/Timers] TOD Clock Device

M48T18; 8KB NVRAM

[Counters/Timers] Watchdog Timer

Time-out generates reset

[Environmental] Non Operating Temperautre

–40° C to +85° C

[Environmental] Operating Temperature

0° C to +55° C, forced air cooling

[Ethernet Interface] Connecto

Routed to P2, RJ-45 on MVME761

[Ethernet Interface] Connector

Routed to P2, DB-15 AUI on MVME712M

[Ethernet Interface] Controller

DEC 21140

[Ethernet Interface] Model

MVME712M
MVME761

[Ethernet Interface] PCI Local bus DMA

Yes, with PCI burst

[Ethernet Interface] PCI Local Bus DMA

Yes, with PCI burst

[Ethernet Interface] Speed

10/100Mb/s
AUI (10Mb/s)

[Floppy] Compatible Controllers

DP8473, 765A, N82077

[Floppy] Configuration

3.5" 2.88MB and 1.44MB; 5.25" 1.2MB

[Floppy] Connector

HD-50 on front panel

[Floppy] Controller

PC87308

[IEEE P1386.1 PCI Mezzanine Card Slot] Address/Data

A32/D32/D64, PMC PN1, PN2, PN3, PN4 connectors

[IEEE P1386.1 PCI Mezzanine Card Slot] Module Types

Basic, single-wide, front panel I/O or P2 I/O (Note: P2 I/O is only accessible to systems equipped for VME64 extension connectors.)

[IEEE P1386.1 PCI Mezzanine Card Slot] PCI Bus Clock

33 MHz

[IEEE P1386.1 PCI Mezzanine Card Slot] Power

+3.3 V, +5 V, ±12 V; 7.5 watts maximum per PMC slot

[IEEE P1386.1 PCI Mezzanine Card Slot] Signaling

5 V

[Keyboard Interface] Connector

6-pin circular female mini DIN on front panel

[Keyboard Interface] Controller

PC87308

[Memory] Architecture

128-bit, two-way interleaved

[Memory] Cache Bus Clock Frequency

Processor clock divided by 2

[Memory] Capacity

1MB via two 32-pin PLCC/CLCC sockets; 8MB surface mount

[Memory] Capacity (50ns EDO)

128, 256, or 512MB on RAM200

[Memory] Capacity (60ns FPM)

32MB on RAM200

[Memory] Cell Capacity Life

10 years at 100% duty cycle

[Memory] Cell Storage Life

50 years at 55° C

[Memory] FLASH

On-board programmable

[Memory] L2 CACHE

256KB

[Memory] MAIN MEMORY

Dynamic RAM

[Memory] NVRAM

8KB (4KB available for users)

[Memory] Parity/ECC

No/Yes

[Memory] Read Access (1MB port)

260 clocks (8 byte burst)

[Memory] Read Access (8MB port)

68 clocks (32 byte burst)

[Memory] Read Burst Mode (50ns EDO)

8-1-1-1 idle; 2-1-1-1 aligned page hit

[Memory] Read Burst Mode (60ns FPM)

9-1-2-1 idle; 3-1-2-1 aligned page hit

[Memory] Removable Battery

Yes

[Memory] Single Cycle Accesses

9 read/4 write

[Memory] Write Access (1MB/8MB)

19 clocks (2 bytes/8 bytes)

[Memory] Write Burst Mode

4-1-1-1 idle; 3-1-1-1 aligned page hit

[Mouse Interface] Connector

6-pin circular female mini DIN on front panel

[Mouse Interface] Controller

PC87308

[Parallel Port] Configuration

8-bit bidirectional, full IEEE 1284 support; Centronics compatible
8-bit bidirectional, IEEE 1284 minus EPP and ECP

[Parallel Port] connector

Routed to P2, D-36 on MVME712M

[Parallel Port] Connector

Routed to P2, HD-36 on MVME761

[Parallel Port] Controller

PC87308

[Parallel Port] Model

MVME712M
MVME761

[Parallel Port] Modes

Master only

[PCI Expansion Connector] Address/Data

A32/D32/D64

[PCI Expansion Connector] Connector

114-pin connector located on the planar of the MVME2600 between P1 and P2

[PCI Expansion Connector] PCI Bus Clock

33 MHz

[PCI Expansion Connector] Signaling

5 V

[Processor] Clock Frequency

MPC603: 200 MHz, MPC604: 333 MHz, MPC604: 400 MHz

[Processor] Memory Type

60 ns FPM or 50 ns EDO for MPC603, MPC604, MPC604

[Processor] Microprocessor

MPC603, MPC604, MPC604

[Processor] On-chip Cache (I/D)

16K/16K for MPC603, MPC604, MPC604

[SCSI Interface] Asynchronous

5.0MB/s

[SCSI Interface] Connector

Routed to P2, 50- or 68-pin on MVME761EXT
Routed to P2, SCSI D-50 on MVME712M

[SCSI Interface] Controller

Symbios 53C825A

[SCSI Interface] Model

MVME712M
MVME761

[SCSI Interface] PCI Local Bus MDA

Yes, with PCI local bus burst

[Synchronous Serial Ports] Buad rate, bps Max.

2.5MB sync, 38.4KB async

[Synchronous Serial Ports] Configuration

EIA-232 DCE/DTE
TTL to P2 (both ports), SIM on MVME761

[Synchronous Serial Ports] Connector

Routed to P2, DB-25 on MVME712M
Routed to P2, HD-26 on MVME761

[Synchronous Serial Ports] Controller

85230/8536

[Synchronous Serial Ports] Model

MVME712M
MVME761

[Synchronous Serial Ports] Number of Ports

One
Two

[Synchronous Serial Ports] Osciallator Cock Rate (PCLK)

10 MHz/5 MHz

[Synchronous Serial Ports] Oscillator Clock rate (LCLK)

10 MHz/5 MHz

[VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014)] Arbiter

RR/PRI

[VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014)] Controller

Tundra Universe

[VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014)] DTB Master

A16–A32; D08–D64, BLT

[VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014)] DTB Slave

A24–A32; D08–D64, BLT, UAT

[VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014)] Interrupt Handler/Generator

IRQ 1–7/Any one of seven IRQs

[VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014)] Location Monitor

Two, LMA32

[VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014)] System Controller

Yes, jumperable or auto detect

Miscellaneous

Reset and abort switches on front panel; six LEDs for FAIL, CHKSTP, CPU, PCI, SCON and FUSE

Processor

Motorola MPC60x Class

Features

16KB/16KB or 32KB/32KB L1 cache
256KB L2 cache
64-bit PCI mezzanine connector
8- or 16-bit Fast SCSI-2 bus interface
8KB x 8 NVRAM and time-of-day clock with
8MB on-board Flash, 1MB socketed
Ethernet transceiver interface with 32-bit PCI local bus DMA
Four 32-bit timers, one watchdog timer
IEEE P1386.1 compatible 32/64-bit PMC expansion slot
MPC60x class of microprocessors
On-board debug monitor with self-test diagnostics
Parallel, floppy, keyboard, and mouse interfaces
replaceable battery backup
Two or three async, one or two sync/async serial ports
Up to 512MB ECC DRAM on-board memory

Frequently asked questions

Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products