MVME2400 Series TM VME Processor Modules ™ � PowerPC 750 32-bit microprocessor � 32KB/32KB L1 cache � 1MB backside L2 cache � 32MB to 512MB of on-board ECC SDRAM � Up to 1MB capacity for on-board firmware or user-specified requirements � 8MB on-board Flash memory for user- specified requirements � On-board debug monitor with self-test diagnostics � Two 32/64-bit PMC expansion slots with front panel and P2 I/O � 64-bit PCI expansion mezzanine connector � 8K x 8 NVRAM and time-of-day clock with replaceable battery backup � One asynchronous serial debug port � Four 32-bit timers, one 16-bit timer, one watchdog timer � 10/100Mb/s Ethernet interface � 4-level requester, 7-level interrupter, and 7-level interrupt handler for VMEbus Low-power, high-performance microprocessor suitable for a variety of applications The MVME2400 series of VME boards provides the performance of Motor- ola’s PowerPlus II Architecture and the ability to be fully customized to satisfy your application needs with two PCI Mezzanine Cards (PMCs). The flexibility of the MVME2400 provides an excellent base platform that can be quickly and easily customized for a variety of industry-specific applications. Utilizing Motorola’s low-power, high-performance PowerPC 750 microproces- sors, the Peripheral Component Interconnect (PCI) bus for the on-board peripherals, processor/memory bus to PCI bus bridge, and a VME interface, the MVME2400 processor modules pack optimum levels of flexibility and per- formance into a single VME slot. FLASH RAM 1 MB - 32MB to 512MB Two PLCCs ECC SDRAM (Socketed) - 8MB FLASH 16 L2 cache 1MB MPC750 Hawk PowerPC Bus—A32/D64-bit PCI Bridge & PMC P2 I/O PMC P2 I/O Memory Controller PCI Expansion 64 64 64 PCI Local Bus—A32/D64-bit 64 PMC PMC PCI to VME Ethernet PCI to ISA Slot 2 Slot 1 DEC 21143 Bridge Bridge Universe 2.0 W83C553 10BaseT/100BaseTX FP I/O PMC FP I/O PMC FP I/O ISA Bus—A16/D8-bit P1 P2 Async Serial EIA232 NVRAM FP I/O 16550 RTC MK48T59 MVME2400 Details PowerPlus Architecture A second-generation architecture, PowerPlus II Architecture MVME2400 Details is a processor and bus architecture fully optimized to get the IEEE P1386.1 Compliant PMC Slots maximum performance from the PowerPC microprocessor The MVME2400 features dual PMC ports with support for family, the PCI bus, and the VMEbus. Features added to the both front-panel and P2 I/O. P2 I/O-based PMCs which follow original PowerPlus Architecture include support for 100 MHz the PMC committee recommendation for PCI I/O when using local bus operation, and utilization of synchronous DRAM the VME64 extension connector will be pin-out compatible (SDRAM) technology. The outstanding performance of VME with the MVME2400. processor boards based on the PowerPlus II Architecture is In addition to providing high-performance expansion I/O, the not due to a single factor. A number of elements in the design IEEE P1386.1 compliant PMC ports form a common architec- of the PowerPlus II Architecture contribute to its outstanding ture for future generations of products. Changing I/O require- performance including the Processor/Memory subsystem, ments can be satisfied by simply replacing PMCs while high-speed local bus, optimally decoupled architecture, reusing the same base platform, reducing the long-term cost decoupling the processor from PCI, and the advanced VME of ownership. interface which reduces PCI delays. VME64 Extension Connector To maximize the capabilities of the MVME2400, 5-row 160- pin DIN connectors replace the 3-row 96-pin connectors his- torically used on VME for P1 and P2. Two rows, Z and D, have been added to the VME P1/J1 and P2/J2 connectors providing a user with additional I/O. The VME64 extension connector is 100% backward compatible with existing VME card systems. SNAPHAT Battery Specifications Miscellaneous Reset and Abort switches and four LEDs for Fail, CPU, PMC1, PMC2 Specifications on front panel Processor IEEE P1386.1 PCI Mezzanine Card Slot Microprocessor: MPC750 MPC750 MPC750 Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, PN4 connectors Clock Frequency: 233 MHz 350 MHz 450 MHz PCI Bus Clock: 33 MHz On-chip Cache (I/D): 32KB/32KB 32KB/32KB 32KB/32KB Signaling: 5V SPECint95, estimated: 10.2 15.4 TBD Power: +3.3V, +5V, ±12V, 7.5 watts maximum SPECfp95, estimated: 8.2 10.5 TBD per PMC slot Memory Module Types: One double-wide or two single-wide front- ECC Protected Main PC100 SDRAM with 100 MHz bus panel I/O or P2 I/O Memory: Note: P2 I/O from PMC slot 2 is only accessible to systems Capacity: 32MB to 512MB equipped for VME64 extension connectors Single Cycle Accesses: 10 read/5 write PCI Expansion Connector Read Burst Mode: 7-1-1-1 idle; 2-1-1-1 aligned page hit Address/Data: A32/D32/D64 Write Burst Mode: 4-1-1-1 idle; 2-1-1-1 aligned page hit PCI Bus Clock: 33 MHz Architecture: 64-bit, single interleave Signaling: 5V L2 Cache: 1MB Connector: 114-pin connector located on the planar Cache Bus Clock 116.67 MHz (233 MHz processor), of the MVME2400 Frequency: 140 MHz (350 MHz processor), 180 MHz (450 MHz processor) Power Requirements EEPROM/Flash: + 5V ± 5% On-board programmable MVME2400 w/ MPC750 Capacity: 4.5 A typ., 5.5 A max. 1MB via two 32-pin PLCC/CLCC sock- @ 233 MHz: ets; 8MB surface mount MVME2400 w/ MPC750 4.5 A typ., 5.5 A max. Read Access (8MB port): 70 Clocks (32 byte burst) @ 350 MHz: Read Access (1MB port): 262 Clocks (32 byte burst) MVME2400 w/ MPC750 3.93 A typ., 4.31 A max. NVRAM: @ 450 MHz: 8KB; 4KB available for users Cell Storage Life: Note: Power requirements are PMC dependent at +12 and –12 50 years at 55° C volts. Cell Capacity Life: 10 years at 100% duty cycle Removable Battery: Yes Board Size Height: 233.4 mm (9.2 in.) VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014) Depth: 160.0 mm (6.3 in.) Controller: Tundra Universe 2.0 Front Panel Height: 261.8 mm (10.3 in.) DTB Master: A16–A32; D08–D64, BLT Width: 19.8 mm (0.8 in.) DTB Slave: A24–A32; D08–D64, BLT, UAT Max. Component 14.8 mm (0.58 in.) Arbiter: RR/PRI Height: Interrupt Handler/ IRQ 1–7/Any one of seven IRQs Generator: Demonstrated MTBF (based on a sample of eight boards in accelerated stress environ- System Controller: Yes, jumperable or auto detect ment) Location Monitor: Two, LMA32 Mean: 190,509 hours Ethernet Interface 95% Confidence: 107,681 hours Controller: DEC 21143 Environmental PCI Local bus DMA: Yes Operating Nonoperating Connector: Routed to front panel via an RJ-45 Temperature: 0° C to +55° C –40° C to +70° C Asynchronous Serial Port Humidity (NC): 5% to 85% 5% to 95% Controller: W83C553 Vibration: 1 G Sine Sweep .5 G Sine Sweep Number of Ports: One, 16550 compatible 5–100 Hz 5–50 Hz; Configuration: 3 G Sine Sweep EIA-574 DTE 50–500 Hz; Async Baud Rate, bps 38.4K EIA-232, 115Kbps raw max.: Counters/Timers TOD Clock Device: M48T559; 8KB NVRAM Real-Time Timers/ One 16-bit, four 32-bit programmable Counters: Watchdog Timer: Time-out generates reset Safety MVME2400-0323 450 MHz MPC750, 32MB ECC SDRAM, 1101 All printed wiring boards (PWBs) are manufactured with a flammabil- MVME2400-0331 450 MHz MPC750, 64MB ECC SDRAM, Scanbe ity rating of 94V-0 by UL recognized manufacturers. MVME2400-0333 450 MHz MPC750, 64MB ECC SDRAM, 1101 Electromagnetic Compatibility (EMC) MVME2400-0341 450 MHz MPC750, 128MB ECC SDRAM, Intended for use in systems meeting the following regulations: Scanbe U.S.: FCC Part 15, Subpart B, Class A MVME2400-0343 450 MHz MPC750, 128MB ECC SDRAM, 1101 Canada: ICES-003, Class A MVME2400-0351 450 MHz MPC750, 256MB ECC SDRAM, This product was tested in a representative system to the following Scanbe standards: MVME2400-0353 450 MHz MPC750, 256MB ECC SDRAM, 1101 CE Mark per European EMC Directive 89/336/EEC with Amend- MVME2400-0361 ments; Emissions: EN55022 Class B; Immunity: EN50082-1 450 MHz MPC750, 512MB ECC SDRAM, Scanbe Software Support MVME2400-0363 450 MHz MPC750, 512MB ECC SDRAM, 1101 The MVME2400 is supported by a variety of operating systems, including a complete range of real-time operating systems and ker- Related Products nels. PMCSPAN-002 Primary PCI expansion, mates directly to the Ordering Information MVME2400 providing slots for either two single- wide or one double-wide IEEE P1386.1 compli- Ordering Information ant PMC cards; optional PMCSPAN-010 PMCSPAN(1)-002 PMCSPAN-002 with original VMEbus Scanbe handles PMCSPAN-010 Part Number Description Secondary PCI expansion, plugs directly into PMCSPAN-002 providing two additional PMC All modules include 1MB backside L2 cache, 9MB Flash, and the slots option of either the original VME Scanbe front panel and handles or PMCSPAN(1)-010 the IEEE 1101 compatible front panel with injector/ejector handles. PMCSAN-010 with original VMEbus Scanbe handles MVME2401-1 233 MHz MPC750, 32MB ECC SDRAM, Scanbe MPMCxxx handle Motorola’s family of PMC modules; ask your sales representative for details MVME2401-3 233 MHz MPC750, 64MB ECC SDRAM, IEEE handle Documentation MVME2403-1 233 MHz MPC750, 32MB ECC SDRAM Scanbe V2400A/IH MVME2400 Installation and Use handle V2400A/PG MVME2400 Programmer’s Reference Guide MVME2403-3 233 MHz MPC750, 32MB ECC SDRAM, IEEE PMCSPANA/IH PMCspan Installation and Use handle PPCBUGA1/UM PPCBug User’s Manual, Part 1 of 2 MVME2431-1 350 MHz MPC750, 32MB ECC SDRAM, Scanbe PPCBUGA2/UM PPCBug User’s Manual, Part 2 of 2 handle PPCDIAA/UM MVME2431-3 Firmware Diagnostics Manual 350 MHz MPC750, 32MB ECC SDRAM, IEEE handle Notes on Ordering Information MVME2432-1 1. Board support package source and object modules available upon 350 MHz MPC750, 64MB ECC SDRAM, Scanbe handle request. 2. Documentation is available for on-line viewing and ordering at MVME2432-3 350 MHz MPC750, 64MB ECC SDRAM, IEEE http://www.motorola.com/computer/literature. handle MVME2433-1 350 MHz MPC750, 128MB ECC SDRAM, Scanbe handle MVME2433-3 350 MHz MPC750, 128MB ECC SDRAM, IEEE handle MVME2434-1 350 MHz MPC750, 256MB ECC SDRAM, Scanbe handle MVME2434-3 350 MHz MPC750, 256MB ECC SDRAM, IEEE handle MVME2400-0321 450 MHz MPC750, 32MB ECC SDRAM, Scanbe www.motorola.com/computer 1-800-759-1107 Motorola Computer Group Worldwide Headquarters: 2900 S. Diablo Way, Tempe, AZ 85282 Sales Offices: United Kingdom: +44 (0) 1256 790555 • Asia Pacific and Japan: 852-2966-3209 • France: +33 (0) 1 64 86 64 00 • Germany: +49 (0) 611-3611 604 • East Mediterranean: 972-3-568-4388 • Canada & Central Pan America: 888-366-3624 • Eastern Pan America: 508-357-8260 • Western Pan America: 408-991-8634 Motorola and the stylized M logo are registered trademarks and the Intelligence Everywhere logo, Digital DNA and the Digital DNA logo are trademarks of Motorola, Inc. PowerPC and the PowerPC logo are registered trademarks and PowerPC 750 is a trademark of International Business Machines Corporation and are used by Motorola, Inc. under license from International Business Machines Corporation. All other product or service names are the property of their respective owners. This data sheet identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Motorola may sell products. A prospective buyer should exercise its own independent judgement to confirm the suitability of the products for particular applications. Motorola reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Motorola does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Motorola’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. ® Reg. U.S. Pat. & Tm. Off. Copyright 1998, 2001 Motorola Inc. M2400-D5 4/01