Industrial Trading chervon right Manufacturers chervon right M chervon right MOTOROLA chervon right MVME2100
About product Specifications Features Datasheet FAQ

MOTOROLA MVME2100

Image of MOTOROLA MVME2100

Description

VME Processor Modules

Part Number

MVME2100

Price

Request Quote

Manufacturer

MOTOROLA

Lead Time

Request Quote

Category

Single Board Computers

Specifications

Form Factor

VME

95% Confidence

107,681 hours

Address/Data

A32/D32
A32/D32, PMC PN1, PN2, PN4 connectors

Arbiter

RR/PRI

Capacity

32MB

Cell Capacity Life

10 Years at 100% Duty Cycle

Cell Storage Life

50 Years at 55 Degrees Celcius

Connector

10/100BaseT routed to front panel, RJ-45
114-pin connector located on the planar of the MVME2100
Routed to front panel, RJ-45

Controller

DEC 21143
PC16550

Core Frequency

200 MHz (At 200 MHz)

Depth

160.0 mm (6.3 in.)

DTB Master

A16–A32; D08–D64, BLT

DTB Slave

A24–A32; D08–D64, BLT, UAT

EEPROM/Flash Capacity

On-Board, Programmable

External Bus Frequency

66.67 MGz (At 200 MHz)

Front panel

Reset and Abort switches; three LEDs for Fail, Activity, SCON

Front Panel Height

261.8 mm (10.3 in.)

Height

233.4 mm (9.2 in.)

Interrupt Handler/Generator

IRQ 1–7/Any one of seven IRQs

Location Monitor

Two, LMA32

Main Memory

Synchronous Dynamic RAM at 66 MGz or 83 MHz

Max. Component Height

14.8 mm (0.58 in.)

Mean

190,509 hours

Microprocessor

MPC8240

Module Types

One single-wide, front-panel I/O or P2 I/O
One Type I with P2 I/O via Rows D and Z,Two Type II with front-panel I/O, supportfor either one double-wide or two singlewide Type II PC•MIP boards

MVME2100 w/MPC8240 @ 200 MHz

+5V ±5%, 12.5W @ 4.875–5.25V

Note

+12 V and –12 V power is not used on the board but is available to the PMC and PC•MIP sites
User I/O using connector P3 of the Type II PC•MIP boards is not supported

NVRAM

8KB; 4KB Available For Users

On-Chip Cache (I/D)

16KB/16KB

PCI Bus Clock

33 MHz

PCI Local bus DMA

Yes

Physical Dimensions

47 mm x 90 mm
74 mm x 149 mm

Power

+3.3 V, +5 V, ±12 V, 7.5 watts maximum per PMC slot
+3.3 V, +5 V, ±12 V, the PC•MIP standarddoes not limit maximum power per slot

Processor

IBM PowerPC MPC8240

Processor Core

MPC60x Class

Read Access

(4/8MB Port)

Read Accress

236 Clocks at 66 MHz or 268 clocks at 83 MGz (32-Byte Burst)

Real-Time Timers/Counters

Four, 16-bit programmable

Removable Batter

Yes

Signaling

3.3 V (+5 V tolerant)
5 V
5V

System Controller

Yes, jumperable or auto detect

TOD Clock Device

MK48T59; 8KB NVRAM

Watchdog Timer

Time-out generates reset

Width

19.8 mm (0.8 in.)

Features

Datasheet

pdf file

MOTOROLA-MVME2100-datasheet.pdf

92 KiB

Extracted Text

Datasheet MVME2100 Series VME Processor Modules Modular single-board computer providing high-performance expansion I/O The MVME2100 series of VME processor modules is a family of highly modular single- board computers for VME applications. At the heart of the MVME2100 is the MPC8240, a highly integrated PowerPC architecture microprocessor with an MPC60x class core, an advanced memory controller, and a peripheral component interconnect (PCI) interface. With the MPC8240 and a combination of a PCI mezzanine card (PMC) and PCMIP mezzanine slots, the MVME2100 provides customers with a high- performance building block for I/O expansion in industrial automation, telecommunications, medical, scientific, or imaging applications. NVRAM RAM Async Flash RTC 32MB Serial 1MB SDRAM MK48T59 Two PLCCs PC16550 4MB Flash (socketed) EIA232 MPC8240 FP I/O Processor ■MPC8240 32-bit microprocessor PCI Local Bus — A32/D32-bit ■L1 cache—16KB/16KB MPC60x class 32 ■32MB of on-board SDRAM with optional ECC PMC PCI Expansion Slot 1 protection PMC PC MIP PC MIP PC MIP FP I/O 32■Two 32-pin PLCC/CLCC sockets for Flash memory; up to 1MB capacity for on-board firmware or user- Ethernet PCI to VME DEC 21143 Bridge specified requirements PC MIP PC MIP Universe 2.0 FP I/O FP I/O ■4MB on-board Flash memory for user-specified 10BaseT/100BaseTX 64 FP I/O requirements P1 P2 ■One IEEE P1386.1 compliant 32-bit PMC slot with front-panel and P2 I/O ■Three 32-bit PCMIP expansion slots, compatible with VITA 29 Draft Standard: one Type I slot with rear panel I/O and two Type II slots with front panel I/O ■32-bit PCI expansion mezzanine connector ■Ethernet transceiver interface with 32-bit PCI local bus DMA, 10/100Mb/s with auto-negotiate speed select ■8K x 8 NVRAM and time-of-day clock with replaceable battery backup ■Four 32-bit timers, one 16-bit timer, one watchdog timer SNAPHAT Battery PMC P2 I/O Rows A & C PC MIP P2 I/O Rows D & Z M VM E21 00 De ta ils MVME2100 DETAILS PC•MIP Expansion VME64 Extension Connectors To maximize I/O expansion flexibility, the MVME2100 To maximize the capabilities of the MVME2100, 5-row, features a combination of PCMIP and PMC slots. 160-pin DIN connectors replace the 3-row, 96-pin PCMIP is a new mezzanine standard that combines the connectors historically used on VME for P1 and P2. Two benefits of the small form factor of IndustryPack with the rows, Z and D, have been added to the VME P1/J1 and performance of PCI. The PCMIP specification is in draft P2/J2 connectors providing a user with additional I/O. form before the VMEbus International Trade Association The VME64 extension connector is 100 percent (VITA) Standards Organization as VITA 29. It is available backward compatible with existing VME card systems. in PDF format at VITA’s standards Web page: Front Panel Handle Options http://www.vita.com/vso/stds.html Part of the VME64x specification defines the use of new injector/extractor handles as defined by IEEE 1101.10. A The MVME2100 provides one Type I PCMIP slot with primary benefit of this handle type is easier insertion rear I/O via the P2 connector and two Type II PCMIP and ejection of the VME board into and out of a slots with front panel I/O. The two Type II slots can backplane. Motorola offers versions of our products that accept either one double-wide or two single-wide are compatible with this standard. PCMIP cards. In addition, we provide versions with the small Scanbe PMC Expansion In addition to three PCMIP slots, the MVME2100 handles traditionally provided on VME. Consult your provides one IEEE P1386.1 compliant PMC slot that sales representative for part numbers and ordering supports both front-panel and P2 I/O, and a mating details. connector to a PMC expansion mezzanine for applications requiring more real estate. A complete catalog of available off-the-shelf PMCs can be found at http://www.groupipc.com In addition to providing high-performance expansion I/O, the mezzanine slots form a common architecture for future generations of products. Changing I/O requirements can be satisfied by simply replacing the PMC or PCMIP mezzanines while reusing the same base platform, reducing the long-term cost of ownership. Sp ec ific atio ns SPECIFICATIONS Processor Memory Microprocessor: MPC8240 Main Memory: Synchronous dynamic RAM at 66 MHz or 83 MHz Processor Core: MPC60x class Capacity: 32MB Core Frequency: 200 MHz EEPROM/Flash: On-board, programmable External Bus 66.67 MHz (at 200 MHz) Frequency: Capacity: 1MB via two 32-pin PLCC/CLCC sockets; 4MB surface mount On-Chip Cache (I/D): 16KB/16KB Read Access (4/8MB 35 clocks at 66 MHz or 36 clocks at port): 83 MHz (32-byte burst) Read Access (1MB 236 clocks at 66 MHz or 268 clocks at port): 83 MHz (32-byte burst) NVRAM: 8KB; 4KB available for users Cell Storage Life: 50 years at 55° C Cell Capacity Life: 10 years at 100% duty cycle Removable Battery: Yes 2 MVME2100 Series VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014) PCMIP Mezzanine Card Slots DTB Master: A16–A32; D08–D64, BLT Address/Data: A32/D32 DTB Slave: A24–A32; D08–D64, BLT, UAT PCI Bus Clock: 33 MHz Arbiter: RR/PRI Signaling: 3.3 V (+5 V tolerant) Interrupt IRQ 1–7/Any one of seven IRQs Power: +3.3 V, +5 V, ±12 V, the PCMIP standard Handler/Generator: does not limit maximum power per slot System Controller: Yes, jumperable or auto detect Physical Dimensions: 47 mm x 90 mm Location Monitor: Two, LMA32 Module Types: One Type I with P2 I/O via Rows D and Z, Two Type II with front-panel I/O, support Ethernet Interface for either one double-wide or two single- wide Type II PCMIP boards Note: User I/O using connector P3 of the Type II PCMIP boards is not Controller: DEC 21143 supported. PCI Local bus DMA: Yes Connector: 10/100BaseT routed to front panel, RJ-45 PCI Expansion Connector Asynchronous Serial Port Address/Data: A32/D32 PCI Bus Clock: 33 MHz Controller: PC16550 Signaling: 5V Connector: Routed to front panel, RJ-45 Connector: 114-pin connector located on the planar of the MVME2100 Counters/Timers Software Support TOD Clock Device: MK48T59; 8KB NVRAM Real-Time Four, 16-bit programmable The MVME2100 is supported by a variety of operating systems, Timers/Counters: including a complete range of real-time operating systems and kernels. Watchdog Timer: Time-out generates reset Demonstrated MTBF Miscellaneous (based on a sample of eight boards in accelerated stress environment) Mean: 190,509 hours Front panel: Reset and Abort switches; three LEDs for Fail, Activity, SCON 95% Confidence: 107,681 hours Board Size Safety Height: 233.4 mm (9.2 in.) All printed wiring boards (PWBs) are manufactured with a flammability rating of 94V-0 by UL recognized manufacturers. Depth: 160.0 mm (6.3 in.) Front Panel Height: 261.8 mm (10.3 in.) Environmental Width: 19.8 mm (0.8 in.) Max. Component 14.8 mm (0.58 in.) Operating Nonoperating Height: Temperature: 0° C to +55° C, –40° C to +85° C forced air cooling Power Requirements Humidity 5% to 90% 5% to 90% (NC): + 5 V ± 5% Vibration: 2 Gs RMS, 6 Gs RMS, MVME2100 w/ 12.5W @ 4.875 – 5.25 V 20–2000 Hz random 20–2000 Hz random MPC8240 @ 200 MHz: Note: +12 V and –12 V power is not used on the board but is available Electromagnetic Compatibility (EMC) to the PMC and PCMIP sites. Intended for use in systems meeting the following regulations: IEEE P1386.1 PCI Mezzanine Card Slot U.S.: FCC Part 15, Subpart B, Class A (non-residential) Canada: ICES-003, Class A (non-residential) Address/Data: A32/D32, PMC PN1, PN2, PN4 connectors This product was tested in a representative system to the following PCI Bus Clock: 33 MHz standards: Signaling: 5 V CE Mark per European EMC Directive 89/336/EEC with Power: +3.3 V, +5 V, ±12 V, 7.5 watts maximum per Amendments; Emissions: EN55022 Class B; Immunity: EN55024 PMC slot Physical Dimensions: 74 mm x 149 mm Module Types: One single-wide, front-panel I/O or P2 I/O MVME2100 Series 3 Ord erin g In formatio n ORDERING INFORMATION Part Number Description MVME2101-1 200 MHz MPC8240, 32MB SDRAM, 5MB Flash, original VME Scanbe front panel and handles MVME2101-3 200 MHz MPC8240, 32MB SDRAM, 5MB Flash, IEEE 1101 compatible front panel with injector/ejector handles Related Products PMCSPAN1-001 PMCSPAN-001 with original VME Scanbe front panel and handles PMCSPAN1-010 PMCSPAN-010 with original VME Scanbe front panel and handles Documentation V2100A/IH MVME2100 Installation and Use Manual V2100A/PG MVME2100 Programmer’s Reference Guide PMCSPANA/IH PMCspan Installation Guide PPCBUGA1/UM PPCBug Firmware User’s Manual, Part 1 of 2 PPCBUGA2/UM PPCBug Firmware User’s Manual, Part 2 of 2 PPCDIAA/UM Firmware Diagnostics Manual Documentation is available for online viewing and ordering at http://www.motorola.com/computer/literature Motorola Computer Group NORTH AMERICA: Tempe, AZ 800-759-1107 or 602-438-5720 ASIA: Shanghai, China +86 21 5292 5693 Regional Offices EUROPE: Loughborough, UK +44 1509 634300 PACIFIC RIM: Tokyo, Japan +81 3 5424 3101 EAST MEDITERRANEAN: Tel Aviv, Israel +972 3 568 4388 ASIA/PACIFIC: Hong Kong +852 2966 3210 www.motorola.com/computer MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners. © 1998, 2002 Motorola, Inc. All rights reserved. This datasheet identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Motorola may sell products. A prospective buyer should exercise its own independent judgement to confirm the suitability of the products for particular applications. Motorola reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Motorola does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Motorola’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. M2100-D3 12/02

Frequently asked questions

How does Industrial Trading differ from its competitors?

chervon down
Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Is there a warranty for the MVME2100?

chervon down
The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carrier will Industrial Trading use to ship my parts?

chervon down
We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Can I buy parts from Industrial Trading if I am outside the USA?

chervon down
Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Which payment methods does Industrial Trading accept?

chervon down
Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

product

Motorola 01-W3494F CPU Board. CompactPCI

product

Motorola 01-W3504F-01G CPU Board. MMC2 | PCI/ISA Bus Interface | Video | Dual Ethernet

product

Motorola 01-W3504F-01H CPU Board. Video | Dual Ethernet | PCI/ISA

product

Motorola 01-W3545F CPU Board.

product

Motorola 01-W3632F CPU Board. PMC Peripheral

product

Motorola 01-W3644F-02A CPU Boards-MMC2 PCI/ISA Single Board Computer - Video, Dual Ethernet