Datasheet MVME172PA2 VME Embedded Controller with Two IndustryPack Slots Dual IndustryPack logic interface for embedded monitoring and control applications The MVME172PA2 allows VME embedded controller users to achieve the price- performance value of RISC architectures while maintaining MC68000 object code compatibility. The inclusion of the Petra application-specific integrated circuit (ASIC), which replaces functions formerly implemented in the IP2 chip and MC2 chip, improves the performance of the memory subsystem. Memory configuration switches enable the customer to tailor memory size for applications requiring smaller memory configurations. ■60 MHz MC68060 Ethernet SCSI RJ-45 RJ-45 RJ-45 RJ-45 Front Panel ■32MB of configurable SDRAM with ECC option ■128KB SRAM with battery backup IP A IP B Serial I/O Serial I/O ■2MB of Flash memory Controllers Flash Controllers 85230 2MB 85230 ECC SDRAM■8K x 8 NVRAM and time-of-day clock with battery 32MB Petra II ASIC backup Configurable NVRAM EEPROM ■Four serial communication ports, configured as 2MB RTC EIA-232-D DTE MK48T58 ■Two 16- or one 32-bit IndustryPack ports with one DMA channel per port (routed to front panel and P2) ■Six 32-bit timers, one watchdog timer VMEbus Ethernet SCSI SRAM Interface Controller Coprocessor MC68060 128KB ■SCSI and Ethernet interfaces Battery-backed VMEchip2 i82596CA 53C710 ■Two 32-pin JEDEC DIP sockets for EPROM ■Remote Reset/Abort/Status control functions ■On-board debugger and diagnostic firmware P2 VMEbus A16-32, D08-64, BLT, UAT, MBLT Master/Slave SNAPHAT Battery MVME172PA2 Details MVME17 2PA2 DETAILS Microprocessor Options IndustryPack Interface The MVME172PA2 features the superscalar MC68060 A key feature of the MVME172PA2 is the IndustryPack microprocessor, which achieves superb integer and logic interface. This interface provides a 32-bit data path floating-point performance from its RISC hybrid for the IndustryPack modules to the local MC68060 bus. architecture. The object code compatibility of the IndustryPack modules provide a wide variety of MC68060 with earlier generations allows a significant connections to “real-world” applications such as I/O, performance increase while preserving software control, interface, analog and digital functions. Up to investment. two single-wide IndustryPack modules can be installed on the MVME172PA2 and still occupy only one VME slot. VMEbus Interface As I/O needs change, a new IndustryPack module can be VMEbus interface functionality is provided by the installed thus preserving the customer’s overall VMEchip2 ASIC designed by Motorola. In addition to investment. controlling the system’s VMEbus functions, the VMEchip2 includes a local bus to/from VMEbus DMA I/O Connections controller, VME board support features, as well as a I/O connections are physically located on the front panel global control and status register (GCSR) for of the board. They include four RJ-45 connectors for the interprocessor communications. The MVME172PA2 also serial ports, an AUI connector for Ethernet, and a 68-pin provides support for the VME D64 specification within SCSI interface connector. the VMEbus interface, further enhancing system Software Support performance. The MVME172PA2 is supported by a wide range of real- time kernels and embedded operating systems. Memory Options The MVME172PA2 provides users with a number of data Integrated Systems, Inc.: pSOS+ storage options such as SDRAM with ECC option, Microware Systems Corporation: OS-9/OS-9000 EPROM/ROM, Flash, and battery-backed SRAM. Microtec: VRTX32 Wind River Systems, Inc.: VxWorks 2 MVME172PA2 Sp ec ific atio ns SPECIFICATIONS Processor Ethernet Microprocessor: MC68060 Controller: 82596CA Clock Frequency: 60 MHz Local bus DMA: Yes Connector: Front panel DB-15 Memory TOD Clock Synchronous Dynamic RAM Capacity: TOD Clock Device: 32MB MK48T58; 8KB NVRAM Read Burst Mode: Replaceable Battery: 4-1-1-1 Yes Write Burst Mode: 2-1-1-1 Counters/Timers Shared: VMEbus/local bus Flash Real-Time Six 32-bit programmable, 1 µsec Capacity: 2MB Timers/Counters: resolution Access Cycles: 6 read, 7 write Watchdog Timer: Time-out generates reset User-Installed ROM Serial Ports Capacity/Sockets: 2MB/Two 32-pin DIP Static RAM Controller: Two 85230 Capacity: 128KB Number of Ports: Four Read/Write Burst 5-3-3-3/5-3-3-3 Configuration: EIA-232-D DTE (all 4 ports) Mode: Sync/Async Baud Rate, Shared: 38.4K VMEbus and local bus bps max.: Battery Type: Lithium Connectors: Front panel RJ-45 Battery Life 406 days continuous backup at 25° C, (approximate): 81 days at 70° C Power Requirements VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014) (with PROM; without IP modules) Typical Maximum DTB Master: A16–A32; D08–D64, BLT, UAT + MBLT +5V ± 5%: 1.75 A 2.0 A DTB Slave: A16–A32; D08–D64, BLT, UAT + MBLT +12V ± 5%: — 100 mA (max., with off- Arbiter: RR/PRI board LAN transceiver) Interrupt Handler: IRQ 1–7 –12V ± 5%: —100 mA Interrupt Generator: Any 1 of 7 Hardware Support System Controller: Yes, jumperable Location Monitor: Four, LMA32 Multiprocessing Four mailbox interrupts, RMW, shared Hardware Support: RAM IndustryPack Logic Interface Debug/Monitor MVME172FW, boot, and diagnostics (included): Data Width: 16/32-bit Interrupts: Two levels Board Size DMA: Two channels Clock Speed: Height: 233.4 mm (9.2 in.) 8 MHz or 30/32 MHz Module Types: Depth: 160.0 mm (6.3 in.) Two single-high, one double-high Transfer Rate, 8 MHz: Front Panel Height: 261.8 mm (10.3 in.) 8MB/sec 16-bit; 16MB/sec 32-bit Connectors: Width: 19.8 mm (0.8 in.) Access via two 50-pin planar connectors SCSI Bus Demonstrated MTBF (based on a sample of eight boards in accelerated stress environment) Controller: NCR 53C710 Mean: 190,509 hours Local Bus DMA: Yes, with local bus burst 95% Confidence: 107,681 hours Asynchronous: 5.0MB/s Synchronous: 10.0MB/s Connector: Front panel 68-pin micro D high density MVME172PA2 3 Environmental Electromagnetic Compatibility (EMC) Intended for use in systems meeting the following regulations: Operating Nonoperating U.S.: FCC Part 15, Subpart B, Class A (non-residential) Temperature: 0° C to +55° C, –40° C to +85° C Canada: ICES-003, Class A (non-residential) forced air cooling This product was tested in a representative system to the following Humidity (NC): 10% to 85% 10% to 85% standards: Vibration: 2 Gs RMS, 6 Gs RMS, CE Mark per European EMC Directive 89/336/EEC with 20–2000 Hz random 20–2000 Hz random Amendments; Emissions: EN55022 Class B; Immunity: EN55024 Safety All printed wiring boards (PWBs) are manufactured with a flammability rating of 94V-0 by UL recognized manufacturers. Ord erin g In formatio n ORDERING INFORMATION Part Number Description MVME172PA-652SE 60 MHz MC68060, 32MB SDRAM, SCSI, Ethernet Documentation V172PLXA/IH MVME172P2 Installation and Use Manual V1X2PLXA/PG MVME172P2/162P2 Programmer’s Guide V172DIAA/UM 172Bug Diagnostics User’s Manual 68KBUG1/D 68K Debugging Package User’s Manual Part 1 68KBUG2/D 68K Debugging Package User’s Manual Part 2 Documentation is available for online viewing and ordering at http://www.motorola.com/computer/literature Motorola Computer Group NORTH AMERICA: Tempe, AZ 800-759-1107 or 602-438-5720 ASIA: Shanghai, China +86 21 5292 5693 Regional Offices EUROPE: Loughborough, UK +44 1509 634300 PACIFIC RIM: Tokyo, Japan +81 3 5424 3101 EAST MEDITERRANEAN: Tel Aviv, Israel +972 3 568 4388 ASIA/PACIFIC: Hong Kong +852 2966 3210 www.motorola.com/computer MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners. This datasheet identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Motorola may sell products. A prospective buyer should exercise its own independent judgement to confirm the suitability of the products for particular applications. Motorola reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Motorola does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Motorola’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. 172IP-D3 02/03 © 2003, 2001, 2000 Motorola, Inc. All rights reserved.