Datasheet MCPN765 CompactPCI Peripheral Processor Maximum performance and flexibility ideal for high availability applications ® The MCPN765 series of CompactPCI boards provides competitive processors, Motorola’s PowerPlus II Architecture, dual 10/100BaseTX Ethernet, two PCI mezzanine card (PMC) slots, and up to 1.5GB of ECC SDRAM. All this is available in a single CompactPCI slot. Using the low-power, high-performance MPC7410 or MPC750 class processors, 64-bit local peripheral component interconnect (PCI) bus for the on-board peripherals and processor/memory bus to PCI bus bridge, the MCPN765 offers maximum performance ® and flexibility. It is also fully compliant to the PICMG 2.1 Hot Swap Specification, making it the ideal choice for high availability applications. ■MPC7410 or MPC750 class processor CompactPCI Bus—64-bit EIA-232 3 EIA-232 ■1MB or 2MB of L2 cache FP & J3 I/O J3 I/O MPC7410 64 L2 MPC750 class■Up to 1.5GB ECC SDRAM, with optional RAM500 Cache Memory Flash 4 Serial memory expansion modules 64MB to 1.5GB 1MB Async PowerPC Architecture ECC SDRAM Nontransparent Two PLCCs Bus 32/D64-bit 16MB Flash■Dual 10/100BaseTX Ethernet interface (Socketed) PCI Bridge NVRAM Hawk 16 ■Two 32/64-bit PMC expansion slots with front-panel RTC PCI Bridge & Memory Bus–144-bit Memory Control or backplane I/O PCI Local Bus—A32/D64-bit■16MB on-board Flash memory for user-specified requirements Two USB PMC PMC Ethernet Ethernet J3 I/O Slot 1 Slot 2 PCI to ISA/IDE■Two 32-pin PLCC/CLCC sockets for Flash memory, up Bridge to 1MB capacity for on-board firmware or user- 10/100BaseTX 10/100BaseTX PMC 64 64 FP I/O or J5 CompactFlash J5 PMC specified requirements FP I/O J5 I/O FP I/O J3/J5■Optional CompactFlash memory card socket on accompanying transition module ■On-board debug monitor with self-test diagnostics ■Two USB ports, four async serial ports ■32KB NVRAM and time-of-day clock with replaceable battery backup ■Four 32-bit timers, one watchdog timer J1/J2 SNAPHAT Battery MCP N76 5 D etail s M CPN765 DE TAILS IEEE P1386.1 Compliant PMC Slots The MCPN765 features dual PMC ports with support for both front-panel and backplane I/O. In addition to providing high-performance expansion I/O, the IEEE P1386.1 compliant PMC ports form a common architecture for future generations of products. Changing I/O requirements can be satisfied by simply replacing PMCs while reusing the same base platform and software, reducing the long-term cost of ownership. PowerPlus II Architecture A second-generation architecture, PowerPlus II Architecture, is a processor and bus architecture fully optimized to get the maximum performance from the PowerPC architecture-compatible microprocessor family, the PCI bus and the CompactPCI bus. Features added to the original PowerPlus Architecture include support for 100 MHz local bus operation and utilization of synchronous DRAM (SDRAM) technology. The outstanding performance of the PowerPlus II Architecture is not due to a single factor. A number of elements in the design of the PowerPlus II Architecture contribute to its outstanding performance including the processor/memory subsystem, high-speed local bus, optimally decoupled architecture, decoupling the processor from PCI and the advanced CompactPCI interface that reduces PCI delays. TM-PIMC-0101 The TM-PIMC-0101 transition module provides industry-standard connector access to two RJ-45 Ethernet connectors, two RJ-45 async serial port connectors (configured as EIA DTE), two headers for async serial ports and two PIM slots for PMC interface modules. One socket for optional CompactFlash memory is also provided. Firmware Monitor Firmware must fulfill the traditional functions of test and initialization, in addition to operating system boot support. The MCPN765 firmware monitor exceeds these requirements plus expands features like power-up tests with extensive diagnostics, as well as a powerful evaluation and debug tool for simple checkout or when high-level development debuggers require additional support. All this is included with the MCPN765 firmware, plus it supports booting both operating systems and kernels. Operating Systems and Kernels MCPN765 supports booting a complete range of real-time operating systems and kernels, which may be purchased from the following companies: Lynx Real-Time Systems, Inc.: LynxOS Wind River Systems, Inc.: VxWorks 2 MCPN765 Sp ec ific atio ns SPECIFICATIONS Processor USB Microprocessor: 450 or 500 MHz MPC750 class Controller: 82C586 or 82C686 500 MHz MPC7410 Connectors: Routed to J3 for use of two Series A On-chip Cache (I/D): 32K/32K receptacles on optional host interface module Memory IEEE P1386.1 PCI Mezzanine Card Slots ECC Protected Main PC100 SDRAM with 100 MHz bus Memory: Address/Data: A32/D32/D64, PMC JN1, JN2, JN3, Capacity: JN4 connectors 64MB to 1.5GB PCI Bus Clock: Single Cycle Accesses: 33 MHz 10 read/5 write Signaling: Read Burst Mode: 5V 7-1-1-1 idle; 2-1-1-1 aligned page hit Power: Write Burst Mode: +3.3V, +5V, ±12V, 7.5 watts maximum 4-1-1-1 idle; 2-1-1-1 aligned page hit per PMC slot L2 Cache: 1MB (750) or 2MB (7410) Module Types: Two single-wide or one double-wide, EEPROM/Flash: On-board programmable front panel I/O or J3 and J5 I/O; Capacity: 1MB via two 32-pin PLCC/CLCC supports PrPMC module type PMCs sockets; 16MB surface mount Note: Due to high component density, uninsulated traces and vias are Read Access (8MB port): 70 clocks (32-byte burst) located in the MCPN765 I/O keepout area. If installed, PMC modules having conductive I/O connectors could contact these traces and vias. Read Access (1MB port): 262 clocks (32-byte burst) If full IEEE 1386-2001 compliance is required, an insulating shield (for NVRAM: 32KB; 24KB available for users example, Kapton tape) should be installed. Cell Capacity Life: 5 years at 100% duty cycle, 25° C Hot Swap Removable Battery: Yes Compliant with PICMG Hot Swap Specification, Revision 1.0 CompactPCI Interface Power Requirements Controller: Intel 2155x Address/Data: A32/D32/D64 (maximum, not including PMC modules) PCI Bus Clock: 33 MHz +3.3V ± +5V +12V ± –12V ± Signaling: 3.3V output; input defined by VIO 5% ± 5% 5% 5% MCPN765- 2.97 A 2.65 A 20 mA <10 mA Dual Ethernet Interface 2371 MCPN765- 2.97 A 3.65 A 20 mA <10 mA Controller: 7371 Two Intel 21143 Interface Speed: 10/100Mb/s Board Size PCI Local bus DMA: Yes, with PCI burst Connector: One RJ-45 on front panel or J5/TM, Height: 233.4 mm (9.2 in.) one additional J5/TM only Depth: 160.0 mm (6.3 in.) Front Panel Height: 261.8 mm (10.3 in.) Asynchronous Serial Ports Width: 19.8 mm (0.8 in.) Controller: 16C550C UART Max. Component Height: 14.8 mm (0.58 in.) Number of Ports: Four Miscellaneous Async Baud Rate, bps max.: 38.4K EIA-232 Connector (COM1): Front panel; also RJ-45 on TM-PIMC- Reset/Abort switch (recessed on the MPC7410) on front panel; three 0101 LEDs for FAIL, CPU activity and hot swap Connector (COM2/3/4): Routed to J3; one RJ-45, two headers on TM-PIMC-0101 Demonstrated MTBF Counters/Timers (based on a sample of eight boards in accelerated stress environment) TOD Clock Device: M48T37V; 32KB NVRAM Mean: 214,322 hours Real-Time Timers/Counters: Four 32-bit programmable 95% Confidence: 121,141 hours Watchdog Timer: Time-out generates reset MCPN765 3 TM-PIMC-0101 Transition I/O Connectors CompactFlash Memory Card Interface Module Asynchronous Serial Ports: Two RJ-45 connectors labeled as Controller: 82C586 COM1 and COM2; two 10-pin Interface: ATA, true IDE mode headers labeled as COM3 and COM4 CompactFlash Cards Motorola CFLASH-xxx series Ethernet: Two RJ-45 (optional): Connector: One standard 50-pin socket PIM Card Slot Board Size Power: +3.3V, +5V, +12V, –12V Module Types: Two single-wide or one double-wide Height: 233.4 mm (9.2 in.) Note: Jn0 PIM connectors incorporate other MCPN765 I/O for future Depth: 80.0 mm (3.1 in.) host interface modules. Front Panel Height: 261.8 mm (10.3 in.) Width: 19.8 mm (0.8 in.) All Modules Environmental Operating Nonoperating Temperature: 0° C to +55° C, –40° C to +85° C forced air cooling Humidity (NC): 10% to 80% 10% to 90% Vibration: 0.5 G RMS, 6.0 Gs RMS, 20–2000 Hz random 20–2000 Hz random Safety All printed wiring boards (PWBs) are manufactured with a flammability rating of 94V-0 by UL recognized manufacturers. Electromagnetic Compatibility (EMC) Intended for use in systems meeting the following regulations: U.S.: FCC Part 15, Subpart B, Class A (non-residential) Canada: ICES-003, Class A (non-residential) This product was tested in a representative system to the following standards: CE Mark per European EMC Directive 89/336/EEC with Amendments; Emissions: EN55022 Class B; Immunity: EN55024 Ord erin g In formatio n ORDERING INFORMATION Part Number Description MCPN765-2241 450 MHz MPC750 class, 64MB SDRAM, two rear Ethernet ports MCPN765-2361 500 MHz MPC750 class, 256MB SDRAM, two Ethernet ports (one configurable, front or rear) MCPN765-2362 500 MHz MPC750 class, 256MB SDRAM, two Ethernet ports (one configurable, front or rear), watchdog reset MCPN765-2371 500MHz MPC750 class, 512MB SDRAM, two Ethernet ports (one configurable, front or rear) MCPN765-3361 500 MHz MPC750 class, 256MB SDRAM, two Ethernet ports (one configurable, front or rear), configurable watchdog timer support MCPN765-3371 500 MHz MPC750 class, 512MB SDRAM, two Ethernet ports (one configurable, front or rear), configurable watchdog timer support MCPN765-7361 500 MHz MPC7410, 256MB SDRAM, two Ethernet ports (one configurable, front or rear) MCPN765-7371 500 MHz MPC7410, 512MB SDRAM, two Ethernet ports (one configurable, front or rear) MCPN765-8361 500 MHz MPC7410, 256MB SDRAM, two Ethernet ports (one configurable, front or rear), configurable watchdog timer support MCPN765-8371 500 MHz MPC7410, 512MB SDRAM, two Ethernet ports (one configurable, front or rear), configurable watchdog timer support 4 MCPN765 Part Number Description ECC Memory Expansion Modules Note: Two modules maximum RAM500-004 64MB ECC DRAM (top) RAM500-005 128MB ECC DRAM (top) RAM500-015 128MB ECC DRAM (bottom) RAM500-006 256MB ECC DRAM (top) RAM500-016 256MB ECC DRAM (bottom) RAM500-010 512MB ECC DRAM (top) RAM500-020 512MB ECC DRAM (bottom) Related Products TM-PIMC-0101 Two RJ-45 Ethernet connectors, two RJ-45 async serial port connectors, two headers for async serial ports, one CompactFlash socket, two PIM slots CFLASH-xxx CompactFlash memory card (where xxx = number of MB) Documentation MCPN765A/IH MCPN765 Installation and Use Manual MCPN765A/PG MCPN765 Programmer’s Reference Guide TMPIMCA/IH TM-PIMC-0x01 Transition Module Installation and Use PPCBUGA1/UM and PPCBug Firmware Package User’s Manual PPCBUGA2/UM PPCDIAA/UM PPCBug Diagnostics Manual Documentation is available for online viewing and ordering at http://www.motorola.com/computer/literature Motorola Computer Group NORTH AMERICA: Tempe, AZ 1 800 759 1107 or +1 602 438 5720 ASIA: Shanghai, China +86 21 5292 5693 Regional Offices EUROPE: Loughborough, UK +44 1509 634300 PACIFIC RIM: Tokyo, Japan +81 3 5424 3101 EAST MEDITERRANEAN: Tel Aviv, Israel +972 3 568 4388 ASIA/PACIFIC: Hong Kong +852 2966 3210 www.motorola.com/computer MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. CompactPCI and PICMG are registered trademarks of PCI Industrial Computer Manufacturers Group. All other product or service names are the property of their respective owners. This datasheet identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Motorola may sell products. A prospective buyer should exercise its own independent judgement to confirm the suitability of the products for particular applications. Motorola reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Motorola does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Motorola’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. CN765-D7 05/03 © 2003, 2002, 2001, 1999 Motorola, Inc. All rights reserved.