DATASHEET KEY FEATURES RJ-45 connector and one 10-pin MPC7410 processor The MCP820 series provides header providing access to the substantial investment High-performance L2 cache asynchronous serial ports, one protection to deployed infra- PIM, two RJ-45 connectors for High-performance, low-latency structure by providing an easy rear Ethernet and two additional SDRAM subsystem upgrade and migration to sync/async serial ports via a state-of-the-art features and Up to 2GB of ECC protected single connector. performance. Utilizing low- capacity power, high-performance Designed with relevant New DMA capability MPC7410 processors with standards, compatibility and 2MB of secondary cache, Variety of persistent memory interoperability in mind, the dual peripheral component types and capacities MCP820 is compliant with interconnect (PCI) buses ® PICMG 2.1 (Hot Swap), VITA Dual 10/100BaseT Ethernet for the on-board peripherals 36 (PIM), IEEE 1386.1 (PMC) and a 64-bit bridge to the Two USB ports (optional) and Motorola’s high availability ® CompactPCI interface, the system architecture speciŢ ca- Two async serial ports, two MCP820 series packs optimum tions. The MCP820 supports async/sync serial ports, keyboard performance and functionality booting a complete range and mouse in a single CompactPCI slot. of real-time operating systems Single PMC slot The MCPTM-01 transition and kernels which may be module provides industry purchased from companies PCI Enhanced IDE (EIDE) control- standard connector access such as Wind River Systems, ler and ţ oppy disk controller to a single mouse/keyboard Inc. and other leading providers. On-board debug monitor with connector, EIDE and ţ oppy self-test diagnostics connectors (internal), one Four 32-bit timers, three watch- dog timers See back page for details The Motorola MCP820 series is a family of CompactPCI host-slot processor modules and the Ţ rst host-slot modules to beneŢ t from Motorola’s PowerPlus III Architecture. The MCP820 series pushes performance and functionality of the PowerPlus Architecture to unprecedented levels. MCP820 CompactPCI Host Slot Processor Board Front Panel Primary PCI Bus B, 33/66 MHz, 64-bit Secondary Kbd/Ms Floppy PCI Bus A, 33 MHz, 64-bit JTAG L2 Cache MPC7410 1MB/2MB PowerPC Architecture Bus 100MHz SDRAM Mezz SDRAM Mezz (1GB Max) (1GB Max) Harrier Harrier SPD SPD Flash A Xport A B to 32MB 2 2 ICI C VPD User Flash B 1MB UART 0 NVRAM UART 1 RTC Single-wide PMC* *PMC can run at 66 MHz but will disable Ethermat CompactPCI J4 Ethernet 10/100 PCI/PCI CompactPCI Bridge J1/2 USB Ethernet (optional) 10/100 USB0 PCI-ISA USB1 Bridge EIDE Super ISA I/O ESCC CIO CompactFlash Type I/II 2SyncCom CompactPCI J3/5 SPECIFICATIONS PROCESSING SUBSYSTEM COMPACTPCI INTERFACE ® Processor: 500 MHz MPC7410 processor Controller: Intel 21154 On-chip L1 Cache (I/D): 32K/32K Address/Data: A32/D32/D64 with parity High-Performance L2 Cache: 200 MHz parity protected, PCI Bus Clock: 33/66 MHz, PCI 2.1 compliant 2MB Signaling: 3.3V output, input defi ned by VIO Frontside Bus: 100 MHz ETHERNET INTERFACE CONTROLLER AND MEMORY SUBSYSTEM ® Controller: Dual Intel 82559ER Dynamic Memory: ECC protected synchronous dynamic Interface Speed: 10/100Mbps RAM PCI Local bus DMA: Yes, with PCI burst Capacity: Up to four RAM500 mezzanines yielding 2GB Connector: One RJ-45 on front panel, one TM port RJ-45 maximum capacity via Jx Additional Functions: Dual DMA engine—See the Harrier ASIC Programmer’s Reference Guide for details; dual multi-processor interrupt controller (MPIC). One DMA engine per Harrier controller. Single Cycle Accesses: 10 read/5 write Read Burst Mode: 8-1-1-1 idle; 3-1-1-1 aligned page hit (CL3) Write Burst Mode: 4-1-1-1 idle; 3-1-1-1 aligned page hit 2 MCP820 PERSISTENT MEMORY FLOPPY Flash Capacity (bootable): 1MB via two 32-pin PLCC Controller: PC97317 sockets; additional 32MB surface mount; selectable via Compatible Controllers: DP8473, 765A, N82077 reset vector Confi guration: 3.5” 2.88MB and 1.44MB; 5.25” 1.2MB CompactFlash: Single Type I/II memory card socket for Connector: Routed to J3, 34-pin header on MCPTM-01 large capacity needs (50-pin socket) Controller: W83C554 MOUSE/KEYBOARD INTERFACE Interface: ATA, true IDE mode Controller: PC97317 NVRAM: 32KB total capacity, 4KB available for user data Connector: Routed to J3, 6-pin mini DIN on MCPTM-01 Cell Storage Life: 50 years at 55° C Cell Capacity Life: 10 years at 100% duty cycle IEEE P1386.1 PCI MEZZANINE CARD SLOT Removable Battery: Yes Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, PN4 SROM/Serial EEPROM: AT93C46 SROMs for Ethernet 2 C devices for vital confi guration; two 8KB dual-address I connectors product data (VPD) and user confi guration data; separate PCI Bus Clock: 33 MHz or 66 MHz 2 C serial EEPROMs (on mezzanines) 256 byte standard I Signaling: 3.3V for memory VPD Power: +3.3V, +5V, 12V, 7.5 watts maximum per PMC slot Module Types: Basic, single-wide, front panel I/O ASYNCHRONOUS SERIAL PORTS or J3 I/O Controller: PC97317 Number of Ports: Two, 16550-compatible COUNTERS/TIMERS Confi guration: EIA-574-DTE TOD Clock Device: MT48T37, 32KB NVRAM Async Baud Rate, bps max.: 38.4K EIA-232, 115Kb/s raw Real-Time Timers/Counters: Four 32-bit programmable Connector (COM1): Front panel RJ-45, also RJ-45 on Watchdog Timers: Three, time-out generates reset MCPTM-01 Connector (COM2): Routed to J3, 10-pin header on POWER REQUIREMENTS MCPTM-01 (not including power required by PMC, PIM or SIMs) SYNCHRONOUS SERIAL PORTS +3.3V ±5% +5V ±5% 12V ±5% MCP820-500: 2.6 A typ. 2.8 A typ. 15 mA typ. Controller: Z85230/Z8536 3.5 A max. 3.75 A max. 20 mA max. Number of Ports: Two Confi guration: TTL to P2 (both ports), SIM on BOARD SIZE MCPTM-01 Baud Rate, bps max.: 2.5MB sync, 38.4KB async Height: 233.4 mm (9.2 in.) Oscillator Clock Rate (PCLK): 10 MHz/5 MHz Depth: 160.0 mm (6.3 in.) Connector: Routed to J3, HD-50 on MCPTM-01 Front Panel Height: 261.8 mm (10.3 in.) Width: 19.8 mm (0.8 in.) EIDE INTERFACE Max. Component Height: 14.8 mm (0.6 in.) Controller: W83C554F Connector: Routed to J5, one 40-pin header on FRONT PANEL DETAIL AND CONTENT MCPTM-01; plus on-board CompactFlash LED Indicators: Board FAIL, CPU Activity and Hot Swap Status USB Recessed Switches: Reset and Abort Controller: USS312 Connectors: Two Series A receptacles on front panel, also routed to J5 MCP820 3 TRANSITION MODULES TRANSITION MODULE I/O CONNECTORS BOARD SIZE Asynchronous Serial Ports: RJ-45 labeled as COM1 Height: 233.4 mm (9.2 in.) Synchronous Serial Ports: Two (Serial 3 and Serial 4). Depth: 80.0 mm (3.1 in.) User confi gurable via the installation of SIMs. Two 60- Front Panel Height: 261.8 mm (10.3 in.) pin connectors on planar for installation of two serial Width: 19.8 mm (0.8 in.) interface modules. Single 50-pin external connector with Y-cable adapter. Mouse/Keyboard: 6-pin circular female mini DIN Floppy: 34-pin header EIDE: One 40-pin header ALL MODULES ENVIRONMENTAL SAFETY Operating Storage/Transit All printed wiring boards (PWBs) are manufactured with a fl ammability rating of 94V-0 by UL recognized Temperature: 0° C to +55° C, forced –40° C to +85° C manufacturers. air cooling exit air Humidity (NC): 10% to 80% 10% to 90% Vibration: 0.5 G RMS, 6.0 Gs RMS, ELECTROMAGNETIC COMPATIBILITY (EMC) 20–2000 Hz random 20–2000 Hz random Intended for use in systems meeting the following regulations: DEMONSTRATED MTBF U.S.: FCC Part 15, Subpart B, Class A (non-residential) (based on a sample of eight boards in accelerated stress Canada: ICES-003, Class A (non-residential) environment) Motorola board products are tested in a representative Mean: 190,509 hours system to the following standards, results pending: 95% Confi dence: 107,681 hours CE Mark per European EMC Directive 89/336/EEC with Amendments; Emissions: EN55022 Class B; Immunity: EN55024 4 MCP820 ORDERING INFORMATION Part Number Description MCP820-500 500 MHz MPC7410 with support for USB, order memory separate MCP820-505-CK 500 MHz MPC7410 without support for USB, order memory separate (confi gurable spare) Related Products MCPTM-01 Transition module: One RJ-45 async serial port connector, one HD-50 sync/async serial port connector (Y-cable splits to two HD-26 connectors), one mouse/ keyboard 6-pin mini DIN, PIM RAM500-005 128MB memory mezzanine, MCP820/MCP765/MVME5100, top RAM500-015 128MB memory mezzanine, MCP820/MCP765/MVME5100, bottom RAM500-006 256MB memory mezzanine, MCP820/MCP765/MVME5100, top RAM500-016 256MB memory mezzanine, MCP820/MCP765/MVME5100, bottom RAM500-010 512MB memory mezzanine, MCP820/MCP765/MVME5100, top RAM500-020 512MB memory mezzanine, MCP820/MCP765/MVME5100, bottom CFLASH-xxx CompactFlash memory card (where xxx = number of MB) Documentation MCP820A/IH MCP820 Installation and Use (includes MCPTM-01 information) MCP820A/PG MCP820 Programmer’s Reference Guide PPCBUGA1/UM and PPCBug Firmware Package User’s Manual, volumes 1 and 2 PPCBUGA2/UM PPCDIAA/UM PPCBug Diagnostics Manual Documentation is available for online viewing and ordering at www.motorola.com/computer/literature Future RoHS Status This product is being redesigned for 5/6 RoHS compliance. When the RoHS compliant version is available, the RoHS designator will be updated accordingly. SOLUTION SERVICES Motorola provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle. Design services help speed time-to-market. Deployment services include global 24x7 technical support. Renewal And solution extras include enhanced warranty and repairs. services enable product longevity and technology refresh. Sales OfŢ ces Tempe, AZ U.S.A. 1 800 759 1107 or +1 602 438 5720 Tel Aviv, Israel +972 3 568 4385 Paris, France +33 1 69 35 25 88 Shanghai, China +86 215292 5693 Munich, Germany +49 89 608 14-0 Tokyo, Japan +81 3 5424 3101 Loughborough, UK +44 1509 634300 Hong Kong, China +852 2966 3209 This document identiŢ es products, their speciŢ cations, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Motorola may sell products. A prospective buyer should exercise its own independent judgment to conŢ rm the suitability of the products for particular applications. Motorola reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Motorola does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Motorola’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. www.motorola.com/computing MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark OfŢ ce. PICMG and CompactPCI are registered trademarks of the PCI Industrial Computer Manufacturers Group. PowerPC is a trademark of IBM Corp. and used under license. Intel is a registered trademark of Intel Corporation or its subsidiaries in the U.S. and other countries. All other product or service names are the property of their respective owners. © Motorola, Inc. 2005 MCP820-D4 10/05