Datasheet CPV5350 CompactPCI Host Slot Processor Board High-performance single-board computer providing I/O access from either the front or rear. ® Motorola Computer Group’s CPV5350 is a high-performance, single-slot, CompactPCI ® ® ® single-board computer powered by an Intel Pentium II or Pentium III processor— Low Power Module. Highly integrated, it provides standard PC I/O plus USB, PCI EIDE, accelerated graphics and dual Fast Ethernet controllers, with an on-board ™ CompactFlash connector for solid-state disk expansion. This clever design allows I/O access from either the front or rear. The CPV5350 is also fully compliant to the ® PICMG 2.1 revision 1.0 CompactPCI Hot Swap Specification, making it an ideal choice for high availability applications. The CPV5350 is designed to meet the needs of embedded application developers. Typical applications include broadband data or intelligent network switching; CTI server; industrial control and automation; military and aerospace; and medical, scientific or imaging products. ® ■Intel low power processor module including: ® ® Din RJ-45 RJ-45 Dsub Dsub Dsub – Pentium II or Pentium III processor – 82440BX chipset – 66/100 MHz system bus frequency 128KB LM78 Flash Disk Battery-Backed ■Up to 256MB on-board 3.3V SDRAM System 1 and 2 NVRAM Monitor ■Accelerated 2D graphics with 2MB video memory 256MB IDE SDRAM ■Dual 10BaseT/100BaseTX Fast Ethernet 1 DIMM Ethernet Ethernet Ultra South 2D Accelerated ■Two Universal Serial Bus (USB) channels 10/100 10/100 I/O Bridge Video with (PIIX4) 2MB RAM■Two asynchronous serial ports Pentium Low Power Module■One bi-directional parallel port Bridge 440BX ■PS/2 keyboard/mouse interface, real-time clock and PCI Bus PCI Bus watchdog timer J1 J2 J3 J4 J5 ■PCI Enhanced IDE controller with support for up to four devices (up to two on-board Flash disks and two Local 64-bit off-board IDE devices) PCI bus for bus expansion ■128KB non-volatile (battery-backed) RAM ■On-board BIOS stored in 512KB Flash ROM ■Supported by industry-standard operating systems ® ® such as Windows NT and VxWorks , with others to come Kbd/ Mouse USB Ethernet LM78 Signals Ethernet Ethernet Ethernet Video COM2 COM1 EIDE USB # 2 Video Kbd/Mouse LPT1 COM2 COM1 CP V5 350 De tails CPV5350 DETAILS Intel Pentium II or Pentium III Processor—Low Power Hot Swap Compatible Module The CPV5350 can be inserted or removed in a powered For high-end embedded applications, the CPV5350 fully system and allows other non-system slot boards to be supports the Pentium II or Pentium III processor—Low removed or added while the chassis is powered up. Power Module (LPM). The processor is combined with Individual clocks for each slot and access to the the Intel 440BX PCI chipset resulting in exceptional backplane ENUM# signals are in compliance with the processing capability. The LPM contains 32KB of internal PICMG 2.1 revision 1.0 CompactPCI Hot Swap Level 1 cache memory as well as 256KB of Level 2 Specification. cache, delivering rapid data access to complex On-Board Peripherals applications. Dynamic execution and dual independent The CPV5350 has an extensive array of on-board I/O that buses are additional performance advantages. For is available from both the front panel of the CPV5350 continual LPM processor speed enhancement options, and/or the rear panel via the CPV5350BTM80 transition consult your Motorola sales representative. module. Two serial, one parallel, two USB, PS/2 mouse Memory and keyboard, one IDE channel (secondary), speaker, The CPV5350 provides one 168-pin DIMM site for reset and floppy are routed via CompactPCI connector on-board memory expansion. Up to 256MB of PC100 J5; and SMBus (alarm), video and dual Ethernet are compliant synchronous DRAM is supported. Memory routed through the backplane via CompactPCI connector size is detected by the system BIOS. J3. 2D Accelerated Graphics CompactPCI Bus ™ A CHIPS 69000 HiQVideo accelerator with 2MB Designed to the CompactPCI interface standard, the integrated memory provides eye-opening 2D accelerated CPV5350 supports a 32-bit PCI interface on the J1 graphics performance for human-machine interfaces and physical CompactPCI connector. On-card devices connect imaging applications. Resolutions up to 1280 x 1024 are directly to the local bus. Off-card CompactPCI bus supported. accesses are supported through the Intel 21154 PCI-PCI bridge. Dual Ethernet Two Intel 82559 Ethernet controllers provide redundant The PCI local bus is also routed to J4, which enables this Ethernet ports for monitoring and telecom applications. board to be used in a Motorola high availability system One or both of these controllers can be used as a such as the CPX8000 family. Consult your local Motorola diagnostic interface allowing for remote monitoring of representative or the Motorola Web site at system status (for example, voltage and temperature). www.motorola.com/computer for more information. 2 CPV5350 Sp ec ific atio ns SPECIFICATIONS Processor Ethernet • Single 333 MHz Pentium II processor—Low Power Module Controller: Two Intel 82559 • Single 500 MHz Pentium III processor—Low Power Module PCI Bus Master: Yes, with PCI burst System Bus Graphics 333 MHz processor: 66 MHz bus Controller: CHIPS 69000 2D accelerated video 500 MHz processor: 100 MHz bus Video Memory: 2MB on-chip SDRAM Resolution: 1280 x 1024 max.; Quarter VGA 320 x 240, Cache 320 x 200 Level 1: 16/16KB instruction/data (Pentium II IDE Flash Disk resident) Level 2: 256KB (integrated) ® Type: Surface-mounted SanDisk Flash chipset Capacity: 16MB Memory Mode: True IDE, configured as primary master Socket: One 168-pin latching DIMM socket I/O Interfaces (Front Panel and Planar) accommodates 1/2/4/8/16/32MBx72 DIMM USB Ports: Two; 4-pin USB on front panel and at J5 DRAM: PC100 compliant synchronous, 60ns, parity or ECC mode (Both registered and Serial Ports: Two RS-232 (16550) 9-pin Dsub on front unbuffered memory are supported.) panel Parallel Port: One bi-directional 25-pin header with all Addressing IEEE 1284 protocols supported including EPP and ECP Real and protected (36-bit) addressing supported Ethernet: Two RJ-45 on front panel Video: 15-pin Dsub on front panel Data Path Keyboard/mouse: 6-pin mini-DIN on front panel (Y-cable accessory recommended) CPU/PCI bus: 64-bit/32-bit Floppy Disk: One channel (360K to 2.88MB) header Bus Interface EIDE: Two channel/four device PCI EIDE with LBA and PIO mode 5 support; supports up CompactPCI bus: PCI Specification Rev. 2.1 compliant, to two on-board Flash disks and two 32-bit, 33 MHz off-board IDE devices. Note: Additional devices may be attached via transition module. Clock/Calendar BIOS Features Real-time clock with (replaceable) battery backup; includes CMOS • BIOS in Flash EPROM • Auto-configuration or extended setup with serial/parallel ports Interrupts remappable Four CompactPCI level-sensitive interrupts, configurable to any • Diskless, keyboardless and videoless operation interrupt vector for Plug-and-Play compatibility • BIOS POST and Setup Note: All ISA on-card interrupts are Plug-and-Play compliant. • System and video BIOS shadowing • Network boot using PXE (Preboot eXecution Environment) • CMOS backup to Flash (allows operation without battery) CPV5350 3 CPV5350BTM80 Transition Module I/O Power Requirements Transition module provides backplane I/O from J3 and J5 on the 333 MHz 500 MHz CPV5350. +5V: 3 A 3.5 A On-board Headers: Speaker, reset, two 40-pin IDE, 34-pin +12V: 100 mA < 25 mA floppy, USB (two 4-pin), keyboard/mouse –12V: 1 mA < 25 mA Rear Panel: Serial (two RS-232 9-pin Dsub), bi- directional parallel (25-pin Dsub), Ethernet +3.3V: 3 A 3 A (two RJ-45), Video (15-pin D), Kbd/mse (one 6-pin mini DIN) Demonstrated MTBF Supervisory (based on a sample of four boards in accelerated stress environment) Mean: 107,161 hours Watchdog Timer: Two-level, software programmable 95% Confidence: 60,570 hours (17.8 ms to 291 sec.); drives interrupt (configurable), NMI or system reset Environmental Alarm Microcontroller CPU temperature (user definable (NS LM78): threshold alarm on selectable IRQ: 5, 7, 9, Operating Nonoperating 11, NMI or SMI), backplane and CPU Temperature: 0° C to +50° C –40° C to +65° C voltages, and chassis fan rotation and intrusion, with status interrogated via Altitude: 5,000 m 15,000 m NMI, SMI or SMBus Humidity (NC): 10% to 80% 10% to 90% Reset Switch: Guarded, on front panel Vibration: 2 Gs RMS, 6 Gs RMS, Front panel LEDs: Power OK (green), disk activity (green), 20–2000 Hz random 20–2000 Hz random watchdog alarm (red), speaker output (amber), Ethernet link (green), Ethernet Electromagnetic Compatibility (EMC) activity (amber) Intended for use in systems meeting the following regulations: Mechanical U.S.: FCC Part 15, Subpart B, Class A (non-residential) Canada: ICES-003, Class A (non-residential) 6U, 4HP wide (233 mm x 160 mm x 20 mm), conforms to PICMG 2.0 This product was tested in a representative system to the following CompactPCI (Rev. 2.1) and PCI SIG 2.1 specifications standards: CE Mark per European EMC Directive 89/336/EEC with Amendments; Emissions: EN55022 Class B; Immunity: EN55024 Safety All printed wiring boards (PWBs) are manufactured with a flammability rating of 94V-0 by UL recognized manufacturers. 4 CPV5350 Ord erin g In formatio n ORDERING INFORMATION Part Number Description Base Board Bundles All bundles include dual Ethernet, EIDE, front panel and rear I/O. CPV5350B-333 333 MHz Pentium II processor–Low Power Module, 256KB L2 cache CPV5350-500 500 MHz Pentium III processor–Low Power Module, 256KB L2 cache Transition Modules CPV5350BTM80-F CPV5350B transition module for the CPX8200 Series (factory installed) CPV5350BTM80-K CPV5350B transition module for the CPX8200 Series (FRU) CPV5350BTM80AI-F CPV5350 transition module with alarm interconnect for the CPX1200 Series (factory installed) CPV5350BTM80EX-F CPV5350 transition module for the CPX2408 Series (factory installed) Memory MEMSD-xxx-F 64MB to 256MB PC100 compliant DIMM memory (where xxx = number of MB) Other On-Board Options CFLASHxxx On-board EIDE compliant CompactFlash memory (where xxx = number of MB) Miscellaneous CPVCABLE-2 Front panel cable kit: includes PS/2 “Y” cable for keyboard/mouse Documentation CPV5350A/IH CPV5350 Installation and Use Manual CPV5350A/PG CPV5350 Programmer’s Reference Guide Documentation is available for online viewing and ordering at http://www.motorola.com/computer/literature. Motorola Computer Group NORTH AMERICA: Tempe, AZ 800-759-1107 or 602-438-5720 ASIA: Shanghai, China +86 21 5292 5693 Regional Offices EUROPE: Loughborough, UK +44 1509 634300 PACIFIC RIM: Tokyo, Japan +81 3 5424 3101 EAST MEDITERRANEAN: Tel Aviv, Israel +972 3 568 4388 ASIA/PACIFIC: Hong Kong +852 2966 3210 www.motorola.com/computer MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. CompactPCI and PICMG are registered trademarks of PCI Industrial Computer Manufacturers Group. All other product or service names are the property of their respective owners. This datasheet identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Motorola may sell products. A prospective buyer should exercise its own independent judgement to confirm the suitability of the products for particular applications. Motorola reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Motorola does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Motorola’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. CV535-D4 4/02 © Motorola Inc.1999, 2001, 2002