Industrial Shoebox Chassis Series features of the to MCH-212 include an 8-ohm speaker, and Introduction 9/25-pin input/output reserved ports. The MCH-212 Shoebox is available in a wide range of systems, including slot board computer, DRAM, hard The MCH-212 Shoebox is a rugged wall or bench-mount drives, and video upgrades. For detailed information, chassis featuring a passive backplane with choice of please refer MiTAC Configuration Guide. configurations -- 6-slot ISA or 5-slot PICMG (3 ISA/2 PCI slots). The MCH-212 Shoebox is constructed with heavy- duty steel and includes a standard 200W power supply that Features is UL, CSA, TUV and CE certified. � Heavy-duty steel casing. The MCH-212 Shoebox contains one high speed cooling � Passive backplane with choice of 6-slot ISA or 5-slot fan and has space for mounting one 3.5” 1.44MB floppy PICMG (3 ISA/2 PCI slots). disk and one 3.5” hard disk drive. The MCH-212 Shoebox � 200W power supply. also comes with standard LED indicators that show � Disk drive housing for one 3.5-inch floppy disk and one 3.5- important status information at the front panel. These LED inch hard disk drive. indicators include a two-digit, 7-segment error code display � Bridge clamp (bracket) for protecting add-on boards against (for diagnostic purposes), an LED for HDD access, and 4- vibration. power status LED’s for problem identification. � One 30 CFM filtered cooling fan. � LED front panel indicators for diagnostic purposes. The MCH-212 Shoebox provides a card bridge bracket for � Lock for keyboard. protecting add-on boards against vibration. Other built-in � Three reserved ports for D-type connector. � .Built-in 8-ohm speaker. MCH-212 Industrial Shoebox Chassis Series Specifications Physical Dimensions 265.6mm x 400mm x 175.8mm Power Supply Rated Input: (L x W x H) AC 115V @ 5A, AC 220V @ 2.8, Weight Net Weight: 7.5kg, Gross Weight: 8 Kg Switchable Rated Frequency: Construction Heavy-duty steel 50 - 60 Hz Backplane ISA: DC Output: Built-in 4-layer 6-slot ISA-bus passive 200 Watt Max. backplane with bus power check circuit + 5V @ 20A Keyboard connector x 1 +12V @ 8A Hidden reset switch x 1 -5V @ 0.5A PCI: -12V @ 0.5A Built-in 6-layer 5-slot PCI-bus passive Add-on Card Bridge Flexible card clamp can protect add-on cards backplane and Card Clamp from vibration Slots: 2-ISA slots Operating Temperature 0 - 55º C (32 - 131º F) 1-Dedicated CPU slot 1-Dedicated PCI slot Storage Temperature 0 - 75º C (32 - 167º F) 1-Shared PCI/ISA slot Operating Humidity 5 - 95%, non-condensing Keyboard connector x 1 Storage Humidity 5 - 75% Hidden reset switch x 1 Altitude 10,000 ft (3000m) Disk Drive Bay Capable of housing one 3.5-inch floppy drive Vibration (operating) 1.5G Max. and 0.1º P-P at 5 to 640 Hz and one 3.5-inch hard drive Shock 10G Peak acceleration Front Indicators 2-digit, 7-segment Error Code Display (10 ms duration) 1-LED for hard drive access MTBF 50,000 Hours 4-Power LED for power status Safety UL, CSA, and TUV approved Cooling Fans Dimensions: EMI FCC Class A approved 92mm x 92mm x 25mm CE EN 50081-2 Capacity: EN 50082-1 30 CFM with dust filter EN 60950 Speaker Built-in 8-ohm speaker I/O Ports Keyboard connector One 9-pin reserved port for D-type connector Two 25-pin reserved port for D-type I/O Ports (cont.) connector Dimensions: mm Note: Specification is subject to change without notice. MiTAC INDUSTRIAL CORP. 41968 Christy St., Fremont, CA 94538, U.S.A. • • TEL: 510-656-5288 • • FAX: 510-656-2669 • • http:// www.mitacinds.com • • • • • •