F7 Data Sheet - 2004-08-27 F7 - 3U/6U CompactPCI/PXI Pentium III SBC u Celeron/Pentium III 733/850MHz u 1-slot 32-bit CompactPCI system master u PXI system controller (Peripheral-slot version on request) u 256MB DRAM, CompactFlash u Graphics controller/digital video output u 10/100Base-TX Fast Ethernet u USB u 2 COMs, IDE, floppy, parallel keyboard/mouse via extension card u On-board hard disk via extension card u Extension kit for 6U systems Equipped with a Celeron or Pentium III processor, the of peripheral devices (such as keyboard, mouse, F7 is a powerful 3U CPU board based on Socket 370. It printer, modem, or video camera). For high-speed is a perfect match as a system-slot card for any networking, the F7 features a 10/100Mbit/s Fast CompactPCI system, with the system slot being placed Ethernet interface. All connections mentioned above either left or right in the enclosure. are conveniently available at the card's front panel. A peripheral-slot version of the F7 is available on For mass storage, the F7 provides enhanced EIDE request.features, suitable for any EIDE hard disk and CD-ROM For 6U CompactPCI and PXI systems the F7 is available drive. An onboard CompactFlash slot allows use of with a special mounting kit including a 6U front panel.silicon disks. The jumperless board can be used with a The board is provided with the i810/i810E chip set, front-side bus clock of up to 133MHz. which contains an embedded graphics controller. The Equipped with a PCI-bridge chip, the F7 offers a full DVI interface allows for attachment of both advanced CompactPCI interface for reliable system expansion. and legacy flat-panel displays and CRT monitors. The Last but not least, the F7's General Software BIOS was onboard USB port is a universal interface to a variety especially designed for embedded system applications. ® 1 Embedded Solutions F7 Data Sheet - 2004-08-27 Technical Data CompactPCI Bus · For expansion of F7 as a 2-slot 3U, or 1- or 2-slot 6U • 3U CompactPCI CPU board rev. 3.0 compliant solution using a special mounting kit • 32-bit CompactPCI system slot functionality with 7 · COM1/COM2 serial (9-pin D-Sub) possible external loads due to PCI-to-PCI bridge · Keyboard/mouse (PS/2) • PCI-to-PCI bridge · LPT parallel (25-pin D-Sub) (only with 8HP I/O extension • Single-slot solution board) • V(I/O): +5V (+3.3V on request) · U-DMA66 via 44-pin connector · Floppy disk connection via 34-pin connector CPU · Connection to F7 via 40-pin IDE and 26-pin LPC connectors • Celeron or Pentium III • I/O extension card AD52 • 100MHz host frequency · For expansion of F7 as a 6U solution using a special • Socket 370 mounting kit · Two serial interfaces (9-pin D-Sub), as RS232 COM1/COM2 Graphics or via serial interface adapters for flexible • Integrated VGA graphics controller and TFT support configuration as RS232..TTY · Connection at front panel · Keyboard/mouse (PS/2) · Maximum resolution: 1600 x 1200, 8-bit color · LPT parallel (26-pin connector) · Connection to F7 via 26-pin LPC connector Memory • 32..256MB DRAM Miscellaneous · One 144-pin SO-DIMM socket for 1Mx64 to 32Mx64 • Battery-backed real-time clock synchronous DRAM modules • Integrated hardware monitor · 100MHz memory bus frequency • Reset button with "alive" LED at front panel • CompactFlash interface • Stand-alone operation possible with suitable MEN adapter · Type I and Type II · True IDEElectrical Specifications • Supply voltage/power consumption: Interfaces · +5V (4.85V..5.25V), 7A (PIII-850MHz), 5.1A (Celeron • Full-duplex 10/100Mbits/s PCI Ethernet controller 600MHz), 6A (Celeron 733MHz) · 82559(ER) controller · +3.3V (3.2V..3.4V), 3.5A · 10/100Base-T RJ45 interface at front panel · F7E: +5V (4.85V..5.25V), 1.75A max. (+80°C) · Two display LEDs in RJ45 connector to signal LAN Link and • MTBF: 65,500h @ 50°C Activity status · Supports network bootMechanical Specifications • USB (Universal Serial Bus) interface • Dimensions: conforming to CompactPCI specification for 3U · Conforming to Open HCI 1.0a boards · At front panel • Weight: · Data throughput up to 12Mbits/s · F7: 324g · F7E I/O extension board (4HP): 138g (without hard disk) PXI · F7 and AD52 with 6U front panel: 428g • Two trigger lines compliant with PXI Specification Environmental Specifications Mass Storage • Temperature range (operation): • Fast IDE ports · 0..+60°C or -40..+85°C (depending on processor) · One IDE hard-disk/CD-ROM port via 40-pin ribbon cable · Airflow: min. 10m³/h connector U-DMA66 • Temperature range (storage): -40..+85°C · One IDE port for local CompactFlash • Relative humidity (operation): max. 95% non-condensing • Relative humidity (storage): max. 95% non-condensing I/O Extension • Altitude: -300m to + 3,000m • 4/8HP I/O extension board F7E for standard interfaces at • Shock: 15g/0.33ms, 6g/6ms front panel • Vibration: 1g/5..2,000Hz ® 2 Embedded Solutions F7 Data Sheet - 2004-08-27 Technical Data Safety • PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers EMC • Tested according to EN 55022 / 1999-05 (radio disturbance) and EN 55024 / 1999-05 (immunity) with regard to CE conformity Software Support • General Software Embedded BIOS for industrial applications • Windows NT, Windows 2000/XP, Embedded Windows • Linux (on request) • VxWorks • QNX (on request) • RTX (on request) ® 3 Embedded Solutions F7 Data Sheet - 2004-08-27 Diagram ® 4 Embedded Solutions F7 Data Sheet - 2004-08-27 Related Products Standard Hardware 02F007E00 F7E, I/O extension for F7, keyboard, mouse, serial, parallel, floppy, 3U/8HP (F7 system slot right), 0..+60°C 02F007E01 F7E, I/O extension for F7, keyboard, mouse, serial, parallel, floppy, 3U/8HP (F7 system slot right), -40..+85°C 02F007E02 F7E, I/O extension for F7, keyboard/mouse, 2x serial, floppy, 3U/4HP (F7 system slot right or left), 0..+60°C 02F007E03 F7E, I/O extension for F7, keyboard/mouse, 2x serial, floppy, 3U/4HP (F7 system slot right or left), -40..+85°C 02F007-00 F7, CompactPCI 3U, single-board computer, Celeron 733MHz incl. passive heat sink, 0MB DRAM, 100Mbit Ethernet, DVI graphics, 0..+60°C 02F007-01 F7, CompactPCI 3U, single-board computer, Celeron 733MHz incl. passive heat sink, 64MB DRAM, 100Mbit Ethernet, DVI graphics, -40..+85°C 02F007-02 F7, CompactPCI 3U, single-board computer, Pentium III 850MHz, 0MB DRAM, 100Mbit Ethernet, DVI graphics, 0..+60°C Please refer to our 3U CompactPCI compare chart for a selection of further single-board computers with different processors and on-board functionality. Systems & Card Cages Disk drives for basic systems are delivered as requested. Different rack sizes, power supplies and backplanes on request. 0701-0009 Abk13.10.04 - nur intern; Preis wird nicht erhBuy:offen fexistierende Kunden Last Delivery:offen fexistierende Kunden Name: B.Schmitz Grund: Ersatz-Standardsystem 0701-0021 kann falle 3U-Karten verwendet werden ------------------------------------------------------------CompactPCI 19" 3U rack-mount enclosure, 3U 7-slot CompactPCI backplane, ATX power supply 0701-0018 CompactPCI 19" 4U/84HP rack-mount enclosure for 3U cards (vertical), 8-slot 3U CompactPCI backplane, system slot right, no rear I/O, space for hard-disk drive, floppy drive, 300W ATX power supply wide range 100..240VAC on front, 1U fan tray included Accessories 05A000-10 Keyboard/mouse Y-cable 0.1m, 6-pin Mini DIN plug to two 6-pin Mini DIN receptacles ® 5 Embedded Solutions F7 Data Sheet - 2004-08-27 Related Products 05F007E00 Hard disk 2.5" installation kit for F7E 05F007N03 Stand-alone adapter for F7 and F7N 05F007-02 DVI-to-VGA cable, DVI plug to 15-pin HD-Sub plug, 2m, -40..+85°C 05F007-03 Adapter, DVI analog plug to VGA 15-pin HD-Sub receptacle, -20..+85°C 05F007-04 6U mounting kit for assembly of F7 + AD52-00/..-01 05F007-05 6U 1Slot mounting kit for assembly of F7 + F7E 05F007-07 6U mounting kit for assembly of F7 + AD52-02/03 0501-0001 DVI-I to DVI-D and VGA Y-adapter cable (for example for D4, F7/N, F8, F9, P17) You can download the data sheet for hard disk 0710-0012 from MEN's website. 0710-0009 IDE hard disk 2.5", 9.5mm, 20GB; for mounting on-board (harddisk mounting kit may be additionally required) 0710-0012 Industrial IDE hard disk 2,5", 40GB, 24 hours/7 days, 0..+60°C; for on-board mounting (hard disk mounting kit may be required additionally) 0751-0006 CompactFlash card, 512MB, Type I, 0..+60°C 0751-0007 CompactFlash card, 512MB, Type I, -40..+85°C 0751-0008 CompactFlash card, 64MB, Type I, 0..+60°C 0751-0009 CompactFlash card, 128MB, Type I, 0..+60°C 0751-0012 CompactFlash card, 256MB, Type I, 0..+60°C 0751-0013 Compact Flash card, 64MB, -40..+85°C 0751-0014 Compact Flash card, 128MB, -40..+85°C 0751-0018 CompactFlash card, 256MB, Type I, -40..+85°C 0752-0060 256MB DRAM 0..+60°C for 02F007-02 0752-0066 128MB DRAM 0..+60°C for 02F007-00 0752-0075 64MB DRAM -40..+85°C for 02F007-01 0752-0091 256MB DRAM 0..+60°C for 02F007-00 0752-0098 128MB DRAM -40..+85°C for 02F007-01 0752-0124 256MB DRAM -40..+85°C for 02F007-01 08AD52-00 AD52, adapter for F7: 2x RS232, keyboard/mouse, temperature range: 0..+60°C 08AD52-01 AD52, adapter for F7: 2x RS232, keyboard/mouse, temperature range: -40..+85°C 08AD52-02 AD52, adapter for F7: 2x SA-adapter slots, keyboard/mouse, temperature range: 0..+60°C ® 6 Embedded Solutions F7 Data Sheet - 2004-08-27 Related Products 08AD52-03 AD52, adapter for F7: 2x SA-adapter slots, keyboard/mouse, temperature range: -40..+85°C 08SA01-00 Serial interface adapter, RS232, not optically isolated, 0..+60°C 08SA02-00 Serial interface adapter, RS422/485, half duplex, optically isolated, 0..+60°C 08SA02-01 Serial interface adapter, RS422/485, full duplex, optically isolated, 0..+60°C 08SA02-07 Serial interface adapter, RS422/485, full duplex, optically isolated, temperature range: -40..+85°C 08SA03-00 Serial interface adapter, RS232, optically isolated, 0..+60°C 08SA03-01 Serial interface adapter, RS232, optically isolated, -40..+85°C 08SA04-00 Serial interface adapter, TTY, optically isolated, 0..+60°C For more functions realized with SA adapters, see the listing on MEN's website. You can also view our SA adapter compare chart for a quick overview of different functions. Please contact sales to make sure that these SA adapters can be used in the board configuration you are looking for. Software 10F007N61 VxWorks 5.5 / Tornado 2.2 BSP for MEN F7N/F7 10F007-70 This MEN board is designed to work in a Microsoft Windows environment. For additional Windows driver packages provided or recommended by MEN please refer to the ordering numbers below. This board is an MEN product running Sysgo's ELinOS Embedded Linux. Sysgo provides full support for MEN hardware. Please contact www.sysgo.de. QNX software for this MEN board is available from QNX (www.qnx.com). For QNX BSP and driver support provided by MEN please refer to the ordering numbers below. This board is an MEN product running Linux. For Linux BSP and driver support provided by MEN please refer to the ordering numbers below. To use MDIS4 low-level drivers, you also need one of the MDIS4 system packages available for Windows, Linux, VxWorks, QNX, RTX or OS-9 (MDIS4 = MEN Driver Interface System). 13Z011-06 MDIS4/2004 low-level driver sources for F7/F7N/D4/EM02 watchdog 13Z011-70 MDIS4/2004 Windows NT4/W2K driver for F7/F7N/D4/EM02 watchdog 14F007-00 BIOS for F7 Documentation ® 7 Embedded Solutions F7 Data Sheet - 2004-08-27 Related Products 20APPN001 Application Note: Using MEN +5V CompactPCI Boards with +3.3V V(I/O) 20F007-00 F7 user manual For the most up-to-date ordering information and direct links to other data sheets and downloads, see the F7 online data sheet under www.men.de. --> Click here! Germany France UK USA MEN Mikro Elektronik GmbHMEN Mikro Elektronik SAMEN Micro LtdMEN Micro, Inc. Neuwieder Straße 5-718, rue René CassinWhitehall, 75 School LanePO Box 4160 90411 NurembergZA de la ChâtelaineHartford, NorthwichLago Vista, TX 78645-4160 Phone +49-911-99 33 5-074240 GaillardCheshire UK, CW8 1PFPhone (512) 267-8883 Fax +49-911-99 33 5-901Phone +33 (0) 450-955-312Phone +44 (0) 1477-549-185Fax (512) 267-8803 E-mail info@men.deFax +33 (0) 450-955-211Fax +44 (0) 1477-549-178E-mail sales@menmicro.com www.men.deE-mail info@men-france.frE-mail info@menmicro.co.ukwww.menmicro.com www.men-france.frwww.menmicro.co.uk The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are trademarks or registered trademarks of their respective holders. Information in this document has been carefully checked and is believed to be accurate as of the date of publication; however, no responsibility is assumed for inaccuracies. MEN Mikro Elektronik accepts no liability for consequential or incidental damages arising from the use of its products and reserves the right to make changes on the products herein without notice to improve reliability, function or design. MEN Mikro Elektronik does not assume any liability arising out of the application or use of the products described in this document. The products of MEN Mikro Elektronik are not suited for use in nuclear reactors and for application in medical appliances used for therapeutical purposes. Application of MEN's products in such plants is only possible after the user has precisely specified the operation environment and after MEN Mikro Elektronik has consequently adapted and released the product. Copyright © 2004 MEN Mikro Elektronik GmbH. All rights reserved. ® 8 Embedded Solutions