MEN MICRO 0701-0041

CPCI Express® Rack - 2009-03-16 CPCI Express® Rack - 8 Slots Single Euro Hybrid n 19" rack-mountable n IEEE 1101.10/11 compliance n 4U / 84 HP system (incl. 1U fan tray) n 8-slot hybrid backplane n Dual system slot in the middle n 3 cPCI Express® peripheral slots to the right n 3 cPCI peripheral slots to the left n cPCI slots prepared for rear I/O n Space for mass storage devices n 300 W ATX power supply n For MEN SBCs F14, F15, F17, F18  This compact 4U rack-mount enclosure is a basic system SBCs are plugged on the CompactPCI® side of the that allows the configuration with both CompactPCI® system. Express and CompactPCI® cards. Being a hybrid system, That way, the three remaining slots on the CompactPCI® it offers an uncomplicated and cost-effective bus and another three slots on the CompactPCI® Express migration solution from parallel 3U CompactPCI® to bus can be used to install additonal I/O functions. serial CompactPCI® Express.While the serial CompactPCI® Express bus on the right is best suited for functions like Gigabit Ethernet, 10 The 8-slot hybrid backplane in this configuration does Gigabit Ethernet or high end graphic with high data not need a bridge or an active logic. The four slots rate requirements, the parallel CompactPCI® bus on the left are designed for 32-bit CompactPCI® and delivers enough performance for all kinds of rear I/O on P2. The four slots on the right are conventional I/O like binary or analog signals. reserved for CompactPCI® Express. The dual For optimum convenience the system is prepared for CompactPCI® Express system slot is situated in the essential mass storage media: the 3U bay can middle of the backplane and is designed as a 4-link-accommodate several hard disk drives available from configuration. Three peripheral slots are accessed MEN. A 300W ATX wide-range power supply unit which is with 4 links x 1 lane each. While two of the accessible from the front of the system is already peripheral slots are accessed with 1 link x1, a included and wired. third slot is accessed with 2 links x1. The enclosure meets EMC requirements, making it a This hybrid system is designed for use with the MEN perfect choice for embedded applications in harsh system-slot SBCs F14, F15, F17 and F18 in combination environments. with the side card F602. This specific side card Ask us for completely configured, wired and tested connects to the CompactPCI® Express side, while the systems! ® 1 Embedded Solutions CPCI Express® Rack - 2009-03-16 Technical Data General System Characteristics n Altitude: -300m to + 3,000m n Compliance with IEC 60 297-3, IEEE 1101.10n Shock: 15g/11ms n 8 slots for 3U Eurocard boards (4 slots with rear I/O)n Bump: 10g/16ms n Vibration (sinusoidal): 2g/10..150Hz Mechanical Specifications n 19" rack-mount standardEMC n 3U card verticaln Tested according to EN 55022 (radio disturbance), n 3U/12HP bay for hard disk drivesIEC1000-4-2 (ESD) and IEC1000-4-4 (burst) n Dimensions: 3U, 84HP, 278mm depth n Weight: 8kg (empty rack without boards)Suited for MEN Boards... n F14 CompactPCI®/CompactPCI® Express Backplanen F15 n 8-slotn F17 n CompactPCI® System slot on the fourth slot from the leftn F18 n Three CompactPCI® peripheral slots n CompactPCI® Express System slot on the fourth slot from the right o Support of four CompactPCI® Express links n Three CompactPCI® Express peripheral slots o One slot with CompactPCI® Express peripheral slot Type 1 o Two slots with CompactPCI® Express peripheral slot Type 2 Power Supply n PC power supply PS/2 o 3U/32HP o ATX-PSU 300W o 90V..264V AC wide range o 3,3 V/28 A, 5 V/30 A, 12 V/15 A, -12 V/0,8 A o Internal 12 VDE fan (ball bearing) o IEC AC input module with socket o 47..63Hz o Agency-approved: CE, UL Recognized Component mark n Front-panel power connectors n Front-panel power-on switch 1U fan chassis n Two vertical fans o 12V o Air flow volume 204 m³/h (manufacturer's data) o Dimensions 119 x 119 x 32 mm o Sound power level 6.4 Bel Environmental Specifications n Temperature range (operation): o 0..+50°C n Temperature range (storage): o -40..+85°C o Power supply: -20..+65°C without derating n Relative humidity (operation): max. 95% non-condensing n Relative humidity (storage): max. 95% non-condensing ® 2 Embedded Solutions CPCI Express® Rack - 2009-03-16 Diagram ® 3 Embedded Solutions CPCI Express® Rack - 2009-03-16 Ordering Information Standard Hardware 0701-0041 19" 4U/84HP CompactPCI Express rack-mount enclosure, 8-slot hybrid backplane, space for hard-disk drives, CD-ROM drive, 300W ATX PSU, 1U fan tray with 2 fans included Miscellaneous 0710-0002 CD ROM (laptop type) drive incl.mounting and mounting material 0710-0005 3.5" IDE hard disk drive incl. mounting material, usual market capacity 0714-0005 Cooling baffle for 3U, 4HP 160mm deep 0714-0009 Filler panel 3U/4HP, IEEE1101, textile gasket 0780-0001 Power cable with power connector/safety plug, 2m For the most up-to-date ordering information and direct links to other data sheets and downloads, see the CPCI Express® Rack online data sheet under » www.men.de. Germany France USA MEN Mikro Elektronik GmbHMEN Mikro Elektronik SAMEN Micro, Inc. Neuwieder Straße 5-718, rue René Cassin24 North Main Street 90411 NurembergZA de la ChâtelaineAmbler, PA 19002 Phone +49-911-99 33 5-074240 GaillardPhone (215) 542-9575 Fax +49-911-99 33 5-901Phone +33 (0) 450-955-312Fax (215) 542-9577 E-mail info@men.deFax +33 (0) 450-955-211E-mail sales@menmicro.com www.men.deE-mail info@men-france.frwww.menmicro.com www.men-france.fr The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are trademarks or registered trademarks of their respective holders. Information in this document has been carefully checked and is believed to be accurate as of the date of publication; however, no responsibility is assumed for inaccuracies. MEN Mikro Elektronik accepts no liability for consequential or incidental damages arising from the use of its products and reserves the right to make changes on the products herein without notice to improve reliability, function or design. MEN Mikro Elektronik does not assume any liability arising out of the application or use of the products described in this document. The products of MEN Mikro Elektronik are not suited for use in nuclear reactors or for application in medical appliances used for therapeutical purposes. Application of MEN's products in such plants is only possible after the user has precisely specified the operation environment and after MEN Mikro Elektronik has consequently adapted and released the product. Copyright © 2011 MEN Mikro Elektronik GmbH. All rights reserved. ® 4 Embedded Solutions