A201S Data Sheet - 2008-07-31 A201S - 6U VMEbus M-Module™ Carrier Board n 4 M-Module™ slots n 1 VMEbus slot n VMEbus slave A16/A24/D16, interrupter n -40 to +85°C screened versions The A201S is an M-Module™ carrier board for universal board models with this connector are not compatible I/O on the VMEbus, allowing high flexibility in with VME64 backplanes. applications such as process and motion control, An interrupt controller handles the M-Modules™ measuring and instrumentation, communication or individually. In VMEbus D16 systems the I/O signals of special-purpose tasks. The M-Modules™ are screwed the M-Modules™ can be accessed from P2/J2 inside the tightly on the carrier board, but the board needs only rack. one slot on the VMEbus. Please note that since all three rows of the P2 connector are used for user I/O, ® 1 Embedded Solutions A201S Data Sheet - 2008-07-31 Technical Data Mezzanine Slots EMC n Four M-Module™ slotsn Tested according to EN 55022 (radio disturbance), n Compliant with M-Module™ standardIEC1000-4-2 (ESD) and IEC1000-4-4 (burst) n Characteristics: D08, D16, A08, INTA, INTC Software Support Interrupt Controllern M-Module™ drivers for Windows®, VxWorks®, Linux, QNX®, n Interrupt handling individually for each M-Module™OS-9® as supported n Functional compatibility with A201N Peripheral Connections n Via front panel n Via 96-pin P2 connector (rear I/O) VMEbus n Only one slot required on the VMEbus n Models with P2 connector not compatible with VME64 backplanes (row B of the P2 connector is used for user I/O) n Slave D08(EO):D16:A16:A24 n Interrupter D08(O) Electrical Specifications n Supply voltage/power consumption: +5V (-3%/+5%), 320mA typ. (without M-Modules™) n MTBF: 430,000h @ 50°C (derived from MIL-HDBK-217F) Mechanical Specifications n Dimensions: standard double Eurocard, 233.3mm x 160mm n Front panel: aluminum with 2 handles, cut-outs for front connectors of 4 M-Modules™ n Weight: 220g Environmental Specifications n Temperature range (operation): o 0..+60°C or -40..+85°C o Airflow: min. 10m³/h n Temperature range (storage): -40..+85°C n Relative humidity range (operation): max. 95% without condensation n Relative humidity range (storage): max. 95% without condensation n Altitude: -300m to + 3,000m n Shock: 15g/11ms n Bump: 10g/16ms n Vibration (sinusoidal): 2g/10..150Hz n Conformal coating on request Safety n PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers ® 2 Embedded Solutions A201S Data Sheet - 2008-07-31 Diagram ® 3 Embedded Solutions A201S Data Sheet - 2008-07-31 Ordering Information Standard Hardware 01A201S02 M-Module carrier board, on-board 16MHz-supply, with P2, -40..+85°C screened 01A201S09 M-Module carrier board, on-board 16MHz-supply, with P2, 0..+60°C 01A201S11 M-Module carrier board, on-board 16MHz-supply, without P2, -40..+85°C screened 01A201S12 M-Module carrier board, on-board 16MHz-supply, without P2, 0..+60°C 01A201S15 M-Module carrier board, on-board 16MHz-supply, ELMA ejectors, with P2, -40..+85°C screened 01A201S16 M-Module carrier board, on-board 16MHz-supply, ELMA ejectors, with P2, 0..+60°C 01A201S17 M-Module carrier board, on-board 16MHz-supply, ELMA ejectors, without P2, -40..+85°C screened 01A201S18 M-Module carrier board, on-board 16MHz-supply, ELMA ejectors, without P2, 0..+60°C Miscellaneous 05M000-01 M-Module cable, 2m, 21-pin VG receptacle to pig tail, for connection to VMEbus P2 mating connector (05M000-02), for wiring of M-Module I/O signals via P2 05M000-02 VMEbus P2 connector for cable connection of 4 21-pin M-Module cables (05M000-01) for mounting in VMEbus enclosure without J2 backplane, consisting of 96-pin shroud and receptacle 05M000-15 Front-panel cover for M-Module cut-outs at front panels, snap-in, 10 pcs 05M000-17 25 mounting screw sets to fix M-Modules on carrier boards Documentation 20A201S00 A201S User Manual For the most up-to-date ordering information and direct links to other data sheets and downloads, see the A201S online data sheet under » www.men.de. ® 4 Embedded Solutions A201S Data Sheet - 2008-07-31 Contact Information Germany France USA MEN Mikro Elektronik GmbHMEN Mikro Elektronik SAMEN Micro, Inc. Neuwieder Straße 5-718, rue René Cassin24 North Main Street 90411 NurembergZA de la ChâtelaineAmbler, PA 19002 Phone +49-911-99 33 5-074240 GaillardPhone (215) 542-9575 Fax +49-911-99 33 5-901Phone +33 (0) 450-955-312Fax (215) 542-9577 E-mail info@men.deFax +33 (0) 450-955-211E-mail sales@menmicro.com www.men.deE-mail info@men-france.frwww.menmicro.com www.men-france.fr The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are trademarks or registered trademarks of their respective holders. Information in this document has been carefully checked and is believed to be accurate as of the date of publication; however, no responsibility is assumed for inaccuracies. MEN Mikro Elektronik accepts no liability for consequential or incidental damages arising from the use of its products and reserves the right to make changes on the products herein without notice to improve reliability, function or design. MEN Mikro Elektronik does not assume any liability arising out of the application or use of the products described in this document. The products of MEN Mikro Elektronik are not suited for use in nuclear reactors or for application in medical appliances used for therapeutical purposes. Application of MEN's products in such plants is only possible after the user has precisely specified the operation environment and after MEN Mikro Elektronik has consequently adapted and released the product. Copyright © 2009 MEN Mikro Elektronik GmbH. All rights reserved. ® 5 5 Embedded Solutions