MARCONI COMMUNICATIONS PCA-200EPC/OC3SC
Specifications
Architecture
Marconi-designed SAR ASIC and an Intel i960 coprocessor
ATM adaptation layer (AAL) support
AAL5
Cabling
Duplex 62.5 µm/125 µm multimode fiber, 2,000 m (6,561.68 ft) maximum, 10 dB loss; or 2-pair, 100 ohm Category 5 UTP or screened Category 5 UTP,
Compliance
FCC Part 15, Class A; UL 1950
Connectors
ST and SC for multimode; RJ-45 for Category 5 UTP
Dimensions
H: 1.5 cm (0.59 in.); W: 12.7 cm (5 in.); D: 23.8 cm (9.37 in.)
DMA support
32-bit burst mode; bus master “fly-by” scatter-gather; supports block transfers of up to 16 words; full 32-bit data path
Form Factor
Single-slot NIC; variable dimensions by bus architecture support
Management
ATM cell statistics, cell errors and virtual path identifier (VPI)/virtual channel identifier (VCI) information (all operating environments), Switched virtual circuit (SVC)
Memory
256 KB on-board RAM
Operating Humidity
20% to 80%, non-condensing, at 104° F (40° C)
Operating Temperature
32° F to 104° F (0° C to 40° C)
Permanent virtual circuit (PVC) support
Up to 1,024 virtual circuits
Power Requirements
2 amps maximum @ +5 V
Software interface
Transparent standard protocol interface; Windows NT ATM application program interface (API) library
User-to-network interface (UNI)
UNI 3.0/3.1; LAN Emulation (LANE) 1.0; RFC 1577
Weight
0.235 kg (0.518 lb)
Features
- Coprocessor design
- ForeThought software support
- Marconi-designed ASICs
Datasheet
Extracted Text
ForeRunner 200E Series NICs For ATM Servers and Workstations Key Benefits • Industry’s best ATM software • Off-load of communications processing from the host to the NIC, improving performance and extending capabilities • Support for a broad range of computers and operating systems Key Features ® • ForeThought software support • Coprocessor design • Marconi-designed ASICs Extend Your Server Capabilities ™ The ForeRunner 200E series from Marconi is a set of 155 Mbps asynchronous transfer mode (ATM) network interface cards (NICs) designed for mid-range server and workstation environments. Based on an advanced application-specific integrated circuit (ASIC) technology, with programmable firmware and an Intel i960 coprocessor, each ForeRunner 200E series NIC is tuned to the particular input/output (I/O) architecture of the host computer. unleash the power superior architecture www.marconi.com TECHNICAL SPECIFICATIONS Hardware Architecture: . . . . . . . . . . . . . . . . . . . . .Marconi-designed SAR ASIC and an Intel i960 coprocessor ATM adaptation layer (AAL) support: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AAL5 Cabling: . . . . . . . . . . .Duplex 62.5 µm/125 µm multimode fiber, 2,000 m (6,561.68 ft) maximum, 10 dB loss; or 2-pair, 100 ohm Category 5 UTP or screened Category 5 UTP, 100 m (328.08 ft) maximum Compliance: . . . . . . . . . . . . . . . . . . . .ATM cell processing per ANSI T1S1 5/92-002R3, ITU I.361, ATM Forum UNI 3.0/3.1 Connectors: . . . . . . . . . . . . . . . . . . . . . . . . . .ST and SC for multimode; RJ-45 for Category 5 UTP DMA support: . . . . . . . . . . . . . . . . . . . . . . . .32-bit burst mode; bus master “fly-by” scatter-gather; supports block transfers of up to 16 words; full 32-bit data path Form factor: . . . . . . . . . . . . . . . . .Single-slot NIC; variable dimensions by bus architecture support Memory: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .256 KB on-board RAM Software Interface: . . . . . . . . . . . . . . . . . . . . . .Transparent standard protocol interface; Windows NT ATM application program interface (API) library Management: . . . . . . . . . . . . . . . . .ATM cell statistics, cell errors and virtual path identifier (VPI)/ virtual channel identifier (VCI) information (all operating environments) Switched virtual circuit (SVC)/ permanent virtual circuit (PVC) support: . . . . . . . . . . . . . . . . . . . . . . . .Up to 1,024 virtual circuits User-to-network interface (UNI): . . . . . . . . .UNI 3.0/3.1; LAN Emulation (LANE) 1.0; RFC 1577 General Compliance: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FCC Part 15, Class A; UL 1950 Dimensions: . . . . . . . . . . . . . . . . . . .H: 1.5 cm (0.59 in.); W: 12.7 cm (5 in.); D: 23.8 cm (9.37 in.) Environmental Operating humidity: . . . . . . . . . . . . . . . . . . . . . .20% to 80%, non-condensing, at 104° F (40° C) Operating temperature: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32° F to 104° F (0° C to 40° C) Power requirements: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 amps maximum @ +5 V Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.235 kg (0.518 lb) Ordering Information ForeRunner PCA-200E PCI Bus* PCA-200EPC/UTP5 155 Mbps Category 5 UTP, RJ-45 connector 105-5101-500 Part number PCA-200EPC/UTP5 at a discount when ordered with an LE series switch PCA-200EPC/OC3SC 155 Mbps OC-3 multimode fiber (MMF), SC connector (square) 105-5112-500 Part number PCA-200EPC/OC3SC at a discount when ordered with an LE series switch Marconi Communications PCA-200EPC/OC3ST North American Headquarters 155 Mbps OC-3 MMF, ST connector (round) 1000 Fore Drive Warrendale, PA 15086 PCA-200EPC/SMF Phone: 724-742-4444 155 Mbps OC-3 single mode fiber (SMF), SC connector (square) Product Information ForeRunner SBA-200E S Bus* Phone: 1-888-404-0444 SBA-200E/UTP5 Fax: 724-742-7700 155 Mbps Category 5 UTP, RJ-45 connector Web site: www.marconi.com 105-6101-500 Part number SBA-200E/UTP5 at a discount when ordered with an LE series switch SBA-200E/OC3SC 155 Mbps OC-3 MMF, SC connector (square) 105-6112-500 Part number SBA-200E/OC3SC at a discount when ordered with an LE series switch SBA-200E/OC3ST Copyright © 2001 Marconi Communications, Inc. Marconi™ is a trademark of Marconi Corporation plc. All Rights Reserved. All 155 Mbps OC-3 MMF, ST connector (round) other brands or products are the trademarks of their respective holders. Please be advised that technical specifications set forth in this document are correct as of March 2001 and are subject to change by Marconi at any time without notice. * Includes CD with driver set for all platforms with “*”; others available on the Web or in-box on Windows; update to drivers with “*” are available on the Web to support listed releases: Windows NT 4.0*, Windows 2000, Windows 9x*, Netware 4.2-–5.1*, AIX 4.2.1–4.3.3*, IRIX 6.5.5 and prior, Solaris 7–8*, HP UX 11.0 and prior, OS/2 Warp 3.0, OS/2 Warp 4.0, Mac OS 7.6, Digital/Compaq UNIX 4.0a DS-ForeRunner200E-NICs-03/01
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the PCA-200EPC/OC3SC?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods