Model ZERO SPAN MODEL: M2TS 5: T (CC) (Usable range -270 to +400°C, -454 to +752°F) Super-mini Signal Conditioners Mini-M Series 6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F) 7: R (Usable range -50 to +1760°C, -58 to +3200°F) THERMOCOUPLE TRANSMITTER 8: S (Usable range -50 to +1760°C, -58 to +3200°F) Functions & Features N: N (Usable range -270 to +1300°C, -454 to +2372°F) • Accepts direct input from a thermocouple and provides a 0: Specify standard process signal • 5-segment linearization [2] OUTPUT • Burnout Current • High-accuracy cold junction compensation A: 4 – 20 mA DC (Load resistance 750 Ω max.) • Fast response type available B: 2 – 10 mA DC (Load resistance 1500 Ω max.) • CE marking C: 1 – 5 mA DC (Load resistance 3000 Ω max.) • UL approval D: 0 – 20 mA DC (Load resistance 750 Ω max.) E: 0 – 16 mA DC (Load resistance 900 Ω max.) Typical Applications F: 0 – 10 mA DC (Load resistance 1500 Ω max.) • High-accuracy cold junction compensation benefits G: 0 – 1 mA DC (Load resistance 15 kΩ max.) narrow span measurements Z: Specify current (See OUTPUT SPECIFICATIONS) • 0.1 μA burnout sensing enables long distance Voltage transmission with minimum offset drifts 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) • Electric furnace (isolation ensured even when 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) 200 V AC power for heater leaks through furnace 3: 0 – 1 V DC (Load resistance 1000 Ω min.) wall) 4: 0 – 10 V DC (Load resistance 10 kΩ min.) • No burnout type can connect to a single T/C in 5: 0 – 5 V DC (Load resistance 5000 Ω min.) parallel with a recorder 6: 1 – 5 V DC (Load resistance 5000 Ω min.) 0: Specify voltage (See OUTPUT SPECIFICATIONS) 23 (.91) [3] POWER INPUT 76 AC Power (2.99) M: 85 – 264 V AC (Operational voltage range 85 – 264 V, 47 – 66 Hz) (Select ‘/N’ for ‘Standards & Approvals’ code.) 124 (4.88) M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, mm (inch) 47 – 66 Hz) (90 – 264 V for UL) DC Power MODEL: M2TS–[1][2]–[3][4] R: 24 V DC (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) ORDERING INFORMATION R2: 11 – 27 V DC • Code number: M2TS-[1][2]-[3][4] (Operational voltage range 11 – 27 V, ripple 10 %p-p max.) Specify a code from below for each [1] through [4]. (Select ‘/N’ for ‘Standards & Approvals’ code.) (e.g. M2TS-2A-M2/BL/CE/Q) P: 110 V DC • Temperature range (e.g. 0 – 800°C) (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) • Special output range (For codes Z & 0) (110 V ±10 % for UL) • Specify the specification for option code /Q (e.g. /C01/V01) [4] OPTIONS (multiple selections) Response Time (0 – 90 %) [1] INPUT THERMOCOUPLE blank: Standard (≤ 0.5 sec.) 1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F) /K: Fast Response (Approx. 25 msec.) 2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F) Burnout 3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F) blank: Upscale burnout 4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F) /BL: Downscale burnout http://www.m-system.co.jp/ M2TS SPECIFICATIONS ES-5012 Rev.17 Page 1/4 MODEL: M2TS /BN: No burnout Standards & Approvlas (must be specified) MIN. span (in °F) /N: Without CE or UL (PR): min. span 670°F /CE: CE marking K (CA): min. span 140°F /UL: UL approval, CE marking E (CRC): min. span 90°F Other Options J (IC): min. span 110°F blank: none T (CC): min. span 140°F /Q: Option other than the above (specify the specification) B (RH): min. span 1410°F (UL not available) R: min. span 650°F S: min. span 690°F N: min. span 200°F SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) Remark: The described accuracy may be partially not /C01: Silicone coating satisfied when the temperature ranges below 0°C. Consult /C02: Polyurethane coating factory. /C03: Rubber coating ADJUSTMENT /V01: Multi-turn fine adjustment OUTPUT SPECIFICATIONS /VN: Sealed adjustment holes ■ DC Current: 0 – 20 mA DC TERMINAL SCREW MATERIAL Minimum span: 1 mA /S01: Stainless steel Offset: Max. 1.5 times span Load resistance: Output drive 15 V max. ■ DC Voltage: -10 – +12 V DC GENERAL SPECIFICATIONS Minimum span: 5 mV Construction: Plug-in Offset: Max. 1.5 times span Connection: M3 screw terminals (torque 0.8 N·m) Load resistance: Output drive 1 mA max.; at ≥ 0.5 V Housing material: Flame-resistant resin (black) Isolation: Input to output to power Overrange output: Approx. -10 to +120 % at 1 – 5 V INSTALLATION Zero adjustment: -5 to +5 % (front) Power Consumption Span adjustment: 95 to 105 % (front) •AC Power input: Burnout: Upscale standard; downscale or no burnout Approx. 3 VA at 100 V optional Approx. 4 VA at 200 V Linearization: Standard Approx. 5 VA at 264 V Cold junction compensation: CJC sensor attached to the •DC power input: Approx. 3 W input terminals Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail INPUT SPECIFICATIONS Weight: 150 g (0.33 lbs) Minimum span: 3 mV Offset: Max. 1.5 times span Input resistance: 30 kΩ min. PERFORMANCE in percentage of span Burnout sensing: 0.1 μA Accuracy: ±0.4 % (at over 400°C or 750°F for R, S and PR; over 770°C or 1420°F for B) MIN. span (in °C) Cold junction compensation error (PR): min. span 370°C (at 25°C ±10°C or 77°F ±18°F) K (CA): min. span 75°C K, E, J, T & N: ±0.5°C or ±0.9°F E (CRC): min. span 50°C S, R & PR: ±1°C or ±1.8°F J (IC): min. span 60°C Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) T (CC): min. span 75°C (at over 770°C or 1420°F for B) B (RH): min. span 780°C Burnout response: ≤ 10 sec. R: min. span 360°C Line voltage effect: ±0.1 % over voltage range S: min. span 380°C Insulation resistance: ≥ 100 MΩ with 500 V DC N: min. span 110°C Dielectric strength: 2000 V AC @1 minute (input to output http://www.m-system.co.jp/ M2TS SPECIFICATIONS ES-5012 Rev.17 Page 2/4 MODEL: M2TS to power to ground) STANDARDS & APPROVALS CE conformity: EMC Directive (2004/108/EC) EMI EN 61000-6-4: 2007 EMS EN 61000-6-2: 2005 Low Voltage Directive (2006/95/EC) EN 61010-1: 2001 Installation Category II Pollution Degree 2 Input or output to power: Reinforced insulation (300 V) Input to output: Basic insulation (300 V) Approval: UL/C-UL nonincendive Class I, Division 2, Groups A, B, C, and D hazardous locations (ANSI/ISA-12.12.01:2007, CAN/CSA-C22.2 No.213:1987) UL/C-UL general safety requirements (UL 61010-1:2004, CAN/CSA-C22.2 No.61010-1:2004) DIMENSIONS unit: mm (inch) 6 (.23) DIN RAIL 4 1 35mm wide 8 5 2–4.2x5 (.17x.20) MTG HOLE 6 (.24) deep 12 9 8–M3 SCREW 14 13 21.5 (.85) 10 (.39) 84 (3.31) 15 (.59) 114 (4.49) [4 (.16)] 23 (.91) • When mounting, no extra space is needed between units. TERMINAL ASSIGNMENTS unit: mm (inch) CJC SENSOR (model: CJM) 4 1 1 8 5 12 9 14 13 http://www.m-system.co.jp/ M2TS SPECIFICATIONS ES-5012 Rev.17 Page 3/4 70.5 (2.78) 14 (.55) 59 (2.32) 4 (.16) 72 (2.83) MODEL: M2TS SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM comp. leadwire Z S Isolation T / C + Low Drift Output + 1 Linearizer 9 + Amplifier Driver OUTPUT – 12 – metal leg – 4 13 U(+) CJC POWER * CJC Sensing SENSOR 5 14 V(–) Volt. Generator model: CJM 8 Base Socket *Deleted with B thermocouple. Specifications are subject to change without notice. http://www.m-system.co.jp/ M2TS SPECIFICATIONS ES-5012 Rev.17 Page 4/4