Manufacturers
M-SYSTEMS Ltce-5A-R/T
Description
M System Ltce-5A-R/T Power Transducer. 24VDC, 0-5 A
Part Number
Ltce-5A-R/T
Price
Request Quote
Manufacturer
M-SYSTEMS
Lead Time
Request Quote
Category
Power Transducer
Datasheet
Extracted Text
111 (4.37) MODEL: LTCE Z: Specify current (See OUTPUT SPECIFICATIONS) Power Transducer Series LT-UNIT Voltage 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) AC CURRENT TRANSDUCER 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) (RMS sensing) 3: 0 – 1 V DC (Load resistance 1000 Ω min.) Functions & Features 4: 0 – 10 V DC (Load resistance 10 kΩ min.) • Converts alternating current from a current transformer 5: 0 – 5 V DC (Load resistance 5000 Ω min.) into a standard process signal 6: 1 – 5 V DC (Load resistance 5000 Ω min.) • Minimum ripple 0: Specify voltage (See OUTPUT SPECIFICATIONS) • Isolation up to 2000 V AC • High-density mounting [3] AUXILIARY POWER SUPPLY • Conforms to IEC 60688 AC Power K3: 100 – 120V AC Typical Applications (Operational voltage range 85 - 132 V, 47 - 66 Hz) • Centralized monitoring and control of motors, pumps or L3: 200 – 240V AC heaters by DCS (Operational voltage range 170 - 264 V, 47 - 66 Hz) • Monitoring power line and power supply current DC Power R: 24 V DC 39 (1.54) (Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) V: 48 V DC (Operational voltage range 48 V ± 10 % , ripple 10 % p-p max.) P: 110 V DC (Operational voltage range 85 – 150 V, ripple 10 %p-p max.) (CE not available) 143 (5.63) [4] OPTIONS mm (inch) Terminal Cover blank: Without /T: With MODEL: LTCE–[1][2]–[3][4] GENERAL SPECIFICATIONS ORDERING INFORMATION Connection: M4 screw terminals (torque 1.2 N·m) • Code number: LTCE–[1][2]-[3][4] Screw terminal: Chrome-plated steel Specify a code from below for each [1] through [4]. Housing material: Flame-resistant resin (black) (e.g. LTCE-5A-K3/T) Isolation: Input to output to power • Special output range (For codes Z & 0) Input waveform: Up to 15 % of 3rd harmonic content Overrange output: 0 to 120 % at 1 – 5 V Zero adjustment: -5 to +5 % (front) [1] INPUT Span adjustment: 95 to 105 % (front) Current 1: 0 – 1 A AC 2: 0 – 2 A AC INPUT SPECIFICATIONS 5: 0 – 5 A AC Frequency: 50 or 60 Hz Operational range: 0 – 120 % of rating Overload capacity: 4000 % of rating for 1 sec., 2000 % for 4 [2] OUTPUT sec., Current 120 % continuous A: 4 – 20 mA DC (Load resistance 500 Ω max.) Input burden: D: 0 – 20 mA DC(Load resistance 500 Ω max.) 0.1 VA (input 0 – 1 A) F: 0 – 10 mA DC (Load resistance 1000 Ω max.) 0.2 VA (input 0 – 2 A) G: 0 – 1 mA DC (Load resistance 10 kΩ max.) 0.5 VA (input 0 – 5 A) J: 0 – 5 mA DC (Load resistance 2000 Ω max.) http://www.m-system.co.jp/ LTCE SPECIFICATIONS ES-3351 Rev.7 Page 1/3 MODEL: LTCE • Overload Capacity STANDARDS & APPROVALS CE conformity: EMC Directive (2004/108/EC) 10 EMI EN 61000-6-4: 2007 EMS EN 61000-6-2: 2005 5 Low Voltage Directive (2006/95/EC) EN 61010-1: 2001 Measurement Category II (input, output) 0 2000 4000 CURRENT [%] Installation Category II (power) Pollution Degree 2 Input to output or power: Reinforced insulation (550 V) OUTPUT SPECIFICATIONS Output to power: Reinforced insulation (300 V) ■ DC Current: 0 – 20 mA DC IEC Standard: IEC 60688 Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 10 V max. ■ DC Voltage: 0 – 12 V DC Minimum span: 5 mV Offset: Max. 1.5 times span Load resistance: Output drive 1 mA max.; at ≥ 0.5 V � OPERATION DIAGRAM (example) OUT OUT 20mA 10V 12 5 4 0 0 2.5 5A 0 2.5 5A IN IN INSTALLATION Power Consumption •AC: Approx. 2 VA •DC: Approx. 1.7 W (15 mA at 110 V) Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 85 %RH (non-condensing) Mounting: Surface or DIN rail Weight: 400 g (0.88 lb) PERFORMANCE in percentage of span Accuracy: ±0.5 % (at 23°C ±10°C or 73.4°F ±18°F, 45 – 65 Hz) Magnetic field (ext. origin) effect: ± 0.5 % (400 A/m) Response time: ≤ 1 sec. (0 – 100 % ±1 %) Ripple: 0.5 %p-p max. Line voltage effect: ±0.25 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input to output to power to ground) Impulse withstand voltage: 1.2 / 50 μsec., ±5 kV (input to output or ground) http://www.m-system.co.jp/ LTCE SPECIFICATIONS ES-3351 Rev.7 Page 2/3 TIME [s] MODEL: LTCE CONNECTION DIAGRAM SOURCE K k 1 4 + CT OUTPUT 2 5 – l L 6 U(+) LOAD POWER 7 V(–) EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 10 (.39) 7–M4 SCREW 2–M4 MTG HOLE TERMINAL COVER (option /T) DIN RAIL 35mm wide 1 2 3 4 5 6 7 27 (1.06) 8 (.31) 3 (.12) 39 (1.54) 143 (5.63) [4 (.16)] • When mounting, no extra space is needed between units. Specifications are subject to change without notice. http://www.m-system.co.jp/ LTCE SPECIFICATIONS ES-3351 Rev.7 Page 3/3 111 (4.37) 98 (3.86) 80 (3.15)
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the Ltce-5A-R/T?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods