Industrial Trading chervon right Manufacturers chervon right K chervon right KONTRON chervon right VX6060
About product Specifications Features Datasheet FAQ

KONTRON VX6060

Image of KONTRON VX6060

Description

6U VPX Dual Intel Core i7 Single Board Computer

Part Number

VX6060

Price

Request Quote

Manufacturer

KONTRON

Lead Time

Request Quote

Category

Single Board Computers

Specifications

Form Factor

VPX
6U VPX forced-air or conduction-cooled

Airflow

SA - Standard Commercial (1" single height passive module heat sink, forced air) 3 m/s, RA - Rugged Air-Cooled (Optional) TBD, RC - Rugged Conduction-Cooled (Depending on processor frequency) NA

Altitude (Operating)

SA - Standard Commercial (1" single height passive module heat sink, forced air) -1,640 to 15,000 ft, RA - Rugged Air-Cooled (Optional) -1,000 to 33,000 ft, RC - Rugged Conduction-Cooled (Depending on processor frequency) -1,640 to 50,000 ft

Backplane 2 DisplayPort

Two embedded DisplayPort on VPX P2 (One for each node in the User Defined Region)

Backplane 2 PCI Express

Two x4 or eight x1 PCI Express interfaces on VPX P1 (x4 Pipes Region) (Optional common PCIe reference clock feature)

Backplane 4 Gigabit Ethernet

Four Gigabit Ethernet Links connected to the onboard 10 port switch. Three Serdes 1000BASE-BX and one 1000BASE-T

Backplane 4 Serial ATA

Four SATA ports (one from each node on P1, plus two from CPU A on P2) allowing Raid storage support

Backplane 4 Serial Ports

Four simplified serial lines or other build options (two Rx/Tx ports on each node is default)

Backplane Audio

Intel HD audio on VPX P2

BIOS

AMI uEFI BIOS

Conformal Coating

SA - Standard Commercial (1" single height passive module heat sink, forced air) Optional, RA - Rugged Air-Cooled (Optional) Standard, RC - Rugged Conduction-Cooled (Depending on processor frequency) Standard

Cooling Method

SA - Standard Commercial (1" single height passive module heat sink, forced air) Convection, RA - Rugged Air-Cooled (Optional) Convection, RC - Rugged Conduction-Cooled (Depending on processor frequency) Conduction

Debug Interface

XDP port for processor emulation probe connection

DMI interface (Per Node)

2.5 GT/s to Platform Controller Hub

EEPROM (Per Node)

1x serial 256 Kbit EEPROM dedicated to system data and 1x serial 256 Kbit EEPROM dedicated to application data

F-RAM (Per Node)

1x 512 KB of permanent F-RAM storage. Dedicated to Application.

Flash (BIOS) (Per Node)

Two sites up to 32 Mb SPI Flash

Front Panel 2 Gigabit Ethernet

Two 1000BASE-T on RJ-45 connector

Front Panel Graphics

One DisplayPort on standard 20-pin DisplayPort connector, one VGA

Front Panel Serial Port

EIA-232 UART interface for CPU A or CPU B on RJ11 connector

Front Panel USB

Two USB 2.0 port on 5-pin, type A USB connectors

LEDs

Six control and status bicolor (red/green) LEDs

Linux

Generic Linux 2.6.x BSP to be used with various Linux distributions., Verified for Fedora 12 and Wind River Linux (PNE 3.x)

Management

Redundant I2C operated remote status/control. Powerful feature compatible with any existing health management infrastructure. Compatible with Kontron Rack Controller (available separately)

NAND Flash (Per Node)

USB FLASH module socket (modules up to 8 GB currently)

Onboard Controllers (Per Node):3 Gigabit Ethernet

Two SERDES Links from i82580 (Barton Hills) Geth MAC/PHY., Connected to two lane PCIe of PCH., One front/rear 1000BASE-T from i82577 (Hanksville).

Onboard Interconnetion: Gigabit Ethernet

Marvell MVL88E6185 10 ports Gigabit Ethernet Serdes switch. Fully switched interconnection of CPU A and CPU B (3 Gethernet ports each) with 4 VPX Backplane ports (see below for details)

Onboard MMC

CPLD control unit with Node status/reset/start/stop features. Remote access from VPX SMB

Onboard PCIe

Dedicated 4x non transparent PCIe link with DMA between onboard CPUs for ultra high speed onboard data exchange

Onboard UART

2 simplified Serial Ports (Rx/Tx) on front and rear P2. EIA-232/EIA-422/EIA-485 mode available.

Onboard Watchdog

Software configurable dual-stage Watchdog timer with programmable timeout from 125 ms to 256s, generates IRQ or reset

Operating

SA - Standard Commercial (1" single height passive module heat sink, forced air) 0° to +55°C, RA - Rugged Air-Cooled (Optional) -40° to +75°C, RC - Rugged Conduction-Cooled (Depending on processor frequency) -40° to +85°C

PCIe (Per Node)

2.5 GT/s gen 1 PCIe. One 8x PCIe to the XMC slot, one 4x PCIe to the backplane x4 pipes through PEX8609 Non Transparent bridge.

Peripheral Extension

A Sata HDD carrier can be mounted instead of the PMC/XMC mezzanine

Platform Controller Hub (Per Node)

Intel Platform Controller Hub PCH QM57 (Ibex Peak-M), Two x4 PCI Express ports, six SATA ports, 14 USB 2.0 ports, several graphics interfaces, RTC, interrupt controller and timers

Power Supply

12V & 5V payload power, 3.3V auxiliary management power, 100W* with 4 GB of memory, no RTM & no XMC. Max of 145W * The power consumption varies depending on your product configuration (Clock settings, XMC, RTM & extra memory)

Processor

Intel Core i7
Intel Core i7 processor with integrated memory and graphics controller supporting ECC 32 KB L1, 256 KB L2 per core, 4 MB L3 shared between cores., LV 2.0 GHz (25W) 0.8" conduction-cooled board, 1" air-cooled board., SV 2.53 GHz (35W) forced air and conduction-cooled (characterization data provided for one slot operation)

Random

SA - Standard Commercial (1" single height passive module heat sink, forced air) VITA 47-Class V1, RA - Rugged Air-Cooled (Optional) VITA 47-Class V2, RC - Rugged Conduction-Cooled (Depending on processor frequency) VITA 47-Class V3

Relative Humidity

SA - Standard Commercial (1" single height passive module heat sink, forced air) 90% without condensation, RA - Rugged Air-Cooled (Optional) 95% without condensation, RC - Rugged Conduction-Cooled (Depending on processor frequency) 95% without condensation

RTOS

VxWorks 6

Shock (Operating)

SA - Standard Commercial (1" single height passive module heat sink, forced air) 20g/11 ms Half Sine, RA - Rugged Air-Cooled (Optional) 40g/20 ms Half Sine, RC - Rugged Conduction-Cooled (Depending on processor frequency) 40g/20 ms Half Sine

Storage

SA - Standard Commercial (1" single height passive module heat sink, forced air) -45° to +85°C, RA - Rugged Air-Cooled (Optional) -45° to +100°C, RC - Rugged Conduction-Cooled (Depending on processor frequency) -45° to +100°C

System Memory (Per Node)

Two DDR3 memory channels, 64-bit soldered ECC, running at 1067 MHz, Initially 2 GB on each channel (8 GB for the whole board)

Temperature

SA - Standard Commercial (1" single height passive module heat sink, forced air) VITA 47-Class AC1, RA - Rugged Air-Cooled (Optional) VITA 47-Class AC3, RC - Rugged Conduction-Cooled (Depending on processor frequency) VITA 47-Class CC4

Vibration Sine (Operating)

SA - Standard Commercial (1" single height passive module heat sink, forced air) 20-500 Hz - 2g, RA - Rugged Air-Cooled (Optional) 5-2,000 Hz - 3g, RC - Rugged Conduction-Cooled (Depending on processor frequency) 20-2,000 Hz - 5g

Windows

Windows XP, Windows7

Features

Datasheet

pdf file

KONTRON-VX6060-datasheet.pdf

1103 KiB

Extracted Text

» » V VX X6 60 06 60 0 « « 6U VPX Dual Intel® Core™ i7 Single Board Computer » New Microarchitecture - Octal Execution Thread VPX Blade » Support for up to 8 GB on 4 Channels, DDR3 1066 MHz, ECC registered SDRAM » Six Gigabit Ethernet Links with onboard Switch » VPX Backplane and onboard x4 PCIe Interconnect » VITA46 and OpenVPX 6U VPX Air-Cooled and Conduction-Cooled Versions If it’s embedded, it ’s Kontron. VX6060 » Implementation Product Overview Implemented as two independent computing nodes, VX6060 is the computing tool the MAG HPEC users were attached to a powerful Ethernet and PCIe infrastructure, waiting for to walk away from 10 years of PowerPC Altivec™ VX6060 is the ideal building bloc for intensive parallel dominance. Combined with the power of 6U VPX backplane computing loads. technology, a new range of rugged embedded computers are appearing, which allows outstanding applications to emerge. Any number of VX6060 can be used together in full mesh or switched OpenVPX environments. » Twice the Computing Power: Two CPUs, Four Cores, Eight Threads Embedding two dual core high performance embedded SWITCH processors, VX6060 is the right answer for rugged embedded computing where the power envelope and dissipation cons- traints at extreme temperature still prohibit the use of quad CPU A CPU B core silicon for another number of years. Core 1 Core 2 Core 1 Core 2 T1 T0 T1 T0 » Features: T3 T2 T3 T2 » Two Intel® Core™ i7 with integrated DDR3 Memory Cont- PCIe Path GETH Path roller Low level, low latency Portable socket API » Four Cores with Hyperthreading (8 threads total) from 1.67 GHz to 2+ GHz » Target Applications » Support for up to 8 GB on 4 Channels, DDR3 1066 MHz, 6U VPX: high performance embedded computing and multi- ECC registered SDRAM processor systems for: » Modular USB FLASH 16 GB+ Mezzanine » Radar, sonar » Six Gigabit Ethernet Links with onboard Switch » Imaging systems » VPX Backplane and onboard x4 PCIe Interconnect » Airborne fighter and UAV radar » One XMC Site with x8 PCIe Interface Standalone: » Rugged Conduction-Cooled Version under 100W Power » Dual processor module in 6U form factor. » Rugged multi display console » VITA46 and OpenVPX 6U VPX Air-Cooled and Conduction- Cooled Versions » Mainstream SBC VX6060 BLOCK DIAGRAM AND FRONT PANEL P0 P1 P2 P3 P4 P5 P6 12V SATA, USB, SATA, USB, PMC I/O XMC I/O Payload GETH, x4 PCIe Display Port Serial Lines IPMB Boot Flash PCI/X 64-bit 133 MHz Dual Intel I/Os to GETH GETH P1, P2 QM57 (AMT) To P1 USB, VGA, Ibex Peak-M DP, Serial to Front x8 PCIe 2.5 Gbps PCIe Switch I/O Extension SATA DDR DDR Bank B Bank B Soldered Soldered Intel Intel To P1 To Core i7-ECC Core i7-ECC CPU A CPU B DDR DDR Bank A Bank A 9 Port Soldered Soldered GETH To P1 Switch T To o P1 P1 PCIe Switch I/Os to Intel P1, P2 x4 PCIe QM57 GETH NT Ibex Peak-M (AMT) Dual Switch Boot GETH Flash Serial GETH A VGA A USB A Display USB Switch A and B Port A A or B GETH 2 www.kontron.com VX6060 Technical Information Form Factor 6U VPX forced-air or conduction-cooled CPU and PCH (Per Node) Intel® Core™ i7 processor with integrated memory and graphics controller supporting ECC Processor 32 KB L1, 256 KB L2 per core, 4 MB L3 shared between cores. LV 2.0 GHz (25W) 0.8" conduction-cooled board, 1" air-cooled board. SV 2.53 GHz (35W) forced air and conduction-cooled (characterization data provided for one slot operation) PCIe 2.5 GT/s gen 1 PCIe. One 8x PCIe to the XMC slot, one 4x PCIe to the backplane x4 pipes through PEX8609 Non Transparent bridge. DMI interface 2.5 GT/s to Platform Controller Hub Platform Controller Hub Intel Platform Controller Hub PCH QM57 (Ibex Peak-M) Two x4 PCI Express ports, six SATA ports, 14 USB 2.0 ports, several graphics interfaces, RTC, interrupt controller and timers Memory (Per Node) System Memory Two DDR3 memory channels, 64-bit soldered ECC, running at 1067 MHz Initially 2 GB on each channel (8 GB for the whole board) NAND Flash USB FLASH module socket (modules up to 8 GB currently) Flash (BIOS) Two sites up to 32 Mb SPI Flash EEPROM 1x serial 256 Kbit EEPROM dedicated to system data and 1x serial 256 Kbit EEPROM dedicated to application data F-RAM 1x 512 KB of permanent F-RAM storage. Dedicated to Application. Onboard Controllers (Per Node) 3 Gigabit Ethernet Two SERDES Links from i82580 (Barton Hills) Geth MAC/PHY. Connected to two lane PCIe of PCH. One front/rear 1000BASE-T from i82577 (Hanksville). UART 2 simplified Serial Ports (Rx/Tx) on front and rear P2. EIA-232/EIA-422/EIA-485 mode available. MMC CPLD control unit with Node status/reset/start/stop features. Remote access from VPX SMB Watchdog Software configurable dual-stage Watchdog timer with programmable timeout from 125 ms to 256s, generates IRQ or reset or cascaded IRQ/reset Onboard Interconnection Gigabit Ethernet Marvell MVL88E6185 10 ports Gigabit Ethernet Serdes switch. Fully switched interconnection of CPU A and CPU B (3 Gethernet ports each) with 4 VPX Backplane ports (see below for details) PCIe Dedicated 4x non transparent PCIe link with DMA between onboard CPUs for ultra high speed onboard data exchange Backplane Interfaces 4 Gigabit Ethernet Four Gigabit Ethernet Links connected to the onboard 10 port switch. Three Serdes 1000BASE-BX and one 1000BASE-T 4 Serial ATA Four SATA ports (one from each node on P1, plus two from CPU A on P2) allowing Raid storage support 2 PCI Express Two x4 or eight x1 PCI Express interfaces on VPX P1 (x4 Pipes Region) (Optional common PCIe reference clock feature) 4 Serial Ports Four simplified serial lines or other build options (two Rx/Tx ports on each node is default) 2 DisplayPort Two embedded DisplayPort on VPX P2 (One for each node in the User Defined Region) Audio Intel® HD audio on VPX P2 Front Panel Interfaces 2 Gigabit Ethernet Two 1000BASE-T on RJ-45 connector Graphics One DisplayPort on standard 20-pin DisplayPort connector, one VGA USB Two USB 2.0 port on 5-pin, type A USB connectors Serial Port EIA-232 UART interface for CPU A or CPU B on RJ11 connector LEDs Six control and status bicolor (red/green) LEDs Onboard Interfaces Debug Interface XDP port for processor emulation probe connection Peripheral Extension A Sata HDD carrier can be mounted instead of the PMC/XMC mezzanine) 3 www.kontron.com VX6060 Technical Information Misc Power Supply 12V & 5V payload power, 3.3V auxiliary management power 100W* with 4 GB of memory, no RTM & no XMC. Max of 145W * The power consumption varies depending on your product configuration (Clock settings, XMC, RTM & extra memory) Software BIOS AMI uEFI BIOS Management Redundant I2C operated remote status/control. Powerful feature compatible with any existing health management infrastructure. Compatible with Kontron Rack Controller (available separately) Linux Generic Linux 2.6.x BSP to be used with various Linux distributions. Verified for Fedora 12 and Wind River Linux (PNE 3.x) Windows Windows XP, Windows7 RTOS VxWorks 6 Environmental Specifications SA - Standard Commercial RA - Rugged Air-Cooled RC - Rugged Conduction-Cooled (1" single height passive (Optional) (Depending on processor module heat sink, forced air) frequency) Conformal Coating Optional Standard Standard Airflow 3 m/s TBD NA Temperature VITA 47-Class AC1 VITA 47-Class AC3 VITA 47-Class CC4 Cooling Method Convection Convection Conduction Operating 0° to +55°C -40° to +75°C -40° to +85°C Storage -45° to +85°C -45° to +100°C -45° to +100°C Vibration Sine (Operating) 20-500 Hz - 2g 5-2,000 Hz - 3g 20-2,000 Hz - 5g Random VITA 47-Class V1 VITA 47-Class V2 VITA 47-Class V3 20g/11 ms Half Sine 40g/20 ms Half Sine 40g/20 ms Half Sine Shock (Operating) Altitude (Operating) -1,640 to 15,000 ft -1,000 to 33,000 ft -1,640 to 50,000 ft Relative Humidity 90% without condensation 95% without condensation 95% without condensation Ordering Information Part.-No. Description Article SA - Standard Commercial VX6060 VX6060-SA24-00000 VX6060 Air-Cooled Commercial Build, 2 GHz Intel® Core™ i7, 4 GB DDR3-SDRAM RC - Rugged Conduction-Cooled VX6060 VX6060-RC24-00000 VX6060 Rugged Conduction-Cooled Build, 2 GHz Intel® Core™ i7, 4 GB DDR3-SDRAM Associated Products: EZ2-VX6060-00-L Laboratory 6U VPX Air-Cooled Development System, Software: Linux Fedora EZ2-VX6060 CORPORATE OFFICES Europe, Middle East & Africa North America Asia Pacific Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP. 85386 Eching/Munich Poway, CA 92064-7147 188 Southern West 4th Ring Road Germany USA Beijing 100070, P.R.China Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: + 86 10 63751188 Fax: +49 (0)8165/ 77 219 Fax: +1 858 677 0898 Fax: + 86 10 83682438 info@kontron.com info@us.kontron.com info@kontron.cn 4 www.kontron.com #VX6060# 04262010MB All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. All brand or product names are trademarks or registered trademarks of their respective owners.

Frequently asked questions

How does Industrial Trading differ from its competitors?

chervon down
Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Is there a warranty for the VX6060?

chervon down
The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carrier will Industrial Trading use to ship my parts?

chervon down
We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Can I buy parts from Industrial Trading if I am outside the USA?

chervon down
Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Which payment methods does Industrial Trading accept?

chervon down
Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

product

Kontron 01014-0201-33-0 CPU Board. MOPSplus 386SX PC/104 CPU Board, 33MHz, 2MB DRAM, 0,9MB Flash-Har...

product

Kontron 01014-0203-33-0 CPU Board. MOPSplus 386SX | PC/104 | 33MHz | 2MB DRAM | 2 x 9MB Flash-Harddi...

product

386SX, 40MHz, 2 MByte DRAM, 2 MByte Flash-Harddisk

product

386SX, 40MHz, 2 MByte DRAM, 4 MByte Flash-Harddisk and 10 BaseT- LAN

product

Fanless 166 MHz Pentium MMX, up to 266 MHz (fan), on-board PCI graphic, LAN, USB, COM, LPT, IDE, FDC

product

Fanless 166 MHz Pentium MMX, up to 266 MHz (fan), on-board PCI graphic, LAN, USB, COM, LPT, IDE, FDC