KONTRON VIPER 825/KAB-01
Specifications
Form Factor
PC/104-Plus
BIOS
Award Elite BIOS in Boot Block Flash with emergency recovery code; save CMOS in Flash option; Auto configuration, extended setup; PnP tables; Setup console redirection to serial port (VT100 mode) with CMOS setup access; Diskless, keyboardless and videoless operation extensions; system and BIOS shadowing; Programmable bus and I/O speeds, and memory wait states; CC00-E000 address blocking; Advanced Power Management (APM 1.2, SMI/SMM) support with programmable resume by alarm and wake-up events
Board Type
Half Size
Bus Interface
PC/AT ISA bus or stand-alone operation; 100% IBM PC/AT compatible; PC/104-Plus compatible; Rev. 2.1 PCI Bus
Cache
8/8 KB Instruction / Data Level 1; 512 KB external 64-bit wide pipelined burst non-blocking ECC Level 2
Clock/Calendar
Real-time clock with 256 byte battery backup CMOS RAM
CompactFlash Module
Optional bootable CompactFlash module interfaces to secondary IDE channel, user upgradeable
CPU
Pentium® 100, 133 & 166 MHz; Pentium® processor with MMX™ technology 200, 233 MHz; Intel 430HX chipset
Data Path
64-bit on CPU; 32-bit on PCI bus (PC/104-Plus); 16-bit on ISA bus
DMA Channels (ISA)
Four 8-bit, three 16-bit; Supports scatter / gather, Fast Type-F DMA
Flash Memory
2 Mb (256 KB) Boot Block for BIOS field upgrade
Floppy Disk
Support for two drives (360 KB to 2.88 MB)
Headers
Serial ports (two 10-pin shrouded); floppy (34-pin shrouded); EIDE (one 40-pin shrouded); PS/2 mouse (4-pin locking); CPU fan (2-pin locking);
I/O
SMC FDC37C932
Interrupts
11 edge sensitive and configurable; 4 PCI level sensitive, configurable to any interrupt vector for PnP compatibility; All ISA onboard interrupts are PnP compliant
Mechanical
181 x 122 x 32 mm at CPU / fan (7.125 x 4.80 x 1.25 in. at CPU / fan); Conforms to IEEE P996 PC/AT bus & PC/104-Plus Rev 1.0 specifications
Memory
Two 72-pin latching SIMM sockets, one bank (must fill); Up to 256 MB with 1, 2, 4, 8, 16, 32 M x 32/36, FPM or EDO DRAM (parity/non-parity and ECC support) with all 256 MB cacheable
OS Compatibility
PC and MS-DOS; Windows 3.X; Windows 95; Windows 98; Windows CE, Windows NT 4.0/5.0; QNX
Parallel Port
One bi-directional with all IEEE 1284 protocols supported and BIOS selectable IRQs and addressing
PCI EIDE
Support for two EIDE drives (master/slave configuration); PIO Mode 5, Bus Master IDE
Processor
Pentium MMX 233MHz
Rear I/O Bracket
COM1 (DB-9); parallel port (DB-25)
Serial Ports
Two RS-232 (16C550) with 16 byte FIFO as COM1-4 with BIOS selectable IRQs and addressing; serial port 2 BIOS configurable as RS-422/485
Supervisory
Watchdog timer (1.6 sec. typ.); Power failure/low battery detector
USB Ports
Two
Features
- Advanced Power Management Features
- Floppy Disk, Serial and Parallel Ports
- Intel 430HX chipset
- PC/104-Plus, ISA Passive Backplane or Stand-Alone Operation
- PCI EIDE and CompactFlash™ Disk Support
- Pentium® or Pentium® MMX™ processor with 512KB L2 cache
- Up to 256 MB FPM or EDO DRAM
Datasheet
Extracted Text
With advanced power management VIPer825 features, the VIPer825 ensures optimal system efficiency and cost effectiveness delivering full ® Cost effective Pentium power processing power in a reliable, compact half-size form factor. Low cost half-size SBC delivering ® full Pentium processing power Features include: ® ® ® Pentium or Pentium MMX™ The VIPer825 is an entry-level Pentium - The PC/104-Plus expansion header provides processor with 512KB L2 cache ® based half-size SBC providing a Pentium access to ISA and PCI bus PC/104 ® Intel 430HX chipset or Pentium with MMX™ technology peripheral modules such as LAN and video processor, 512 KB L2 cache, up to 256 MB controllers. Floppy Disk, Serial and Parallel Ports memory (parity/non-parity or ECC), PCI EIDE and CompactFlash™ disk support. Up to 256 MB FPM or EDO DRAM PCI EIDE and CompactFlash™ Disk It also provides serial/parallel ports, Support AT keyboard and PS/2 mouse and a Advanced Power Management Features floppy disk interface. PC/104-Plus, ISA Passive Backplane or Stand-Alone Operation VIPer825- Technical Specifications CPU BIOS ® ® • Pentium 100, 133 & 166 MHz; Pentium processor with MMX™ technology 200, • Award Elite BIOS in Boot Block Flash with emergency recovery code; save CMOS 233 MHz in Flash option • Intel 430HX chipset • Auto configuration, extended setup; PnP tables • Setup console redirection to serial port (VT100 mode) with CMOS setup access Bus Interface • Diskless, keyboardless and videoless operation extensions; system and • PC/AT ISA bus or stand-alone operation BIOS shadowing • 100% IBM PC/AT compatible • Programmable bus and I/O speeds, and memory wait states • PC/104-Plus compatible • CC00-E000 address blocking • Rev. 2.1 PCI Bus • Advanced Power Management (APM 1.2, SMI/SMM) support with programmable resume by alarm and wake-up events Cache • 8/8 KB Instruction / Data Level 1 Supervisory • 512 KB external 64-bit wide pipelined burst non-blocking ECC Level 2 • Watchdog timer (1.6 sec. typ.) • Power failure/low battery detector Memory • Two 72-pin latching SIMM sockets, one bank (must fill) OS Compatibility ® ® ® ® • Up to 256 MB with 1, 2, 4, 8, 16, 32 M x 32/36, FPM or EDO DRAM • PC and MS-DOS™; Windows 3.X; Windows 95; Windows 98; Windows CE, ® (parity/non-parity and ECC support) with all 256 MB cacheable Windows NT 4.0/5.0; QNX™ Data Path Mechanical • 64-bit on CPU; 32-bit on PCI bus (PC/104-Plus); 16-bit on ISA bus • 181 x 122 x 32 mm at CPU / fan (7.125 x 4.80 x 1.25 in. at CPU / fan) • Conforms to IEEE P996 PC/AT bus & PC/104-Plus Rev 1.0 specifications Interrupts • 11 edge sensitive and configurable Power Requirements • 4 PCI level sensitive, configurable to any interrupt vector for PnP compatibility Supply Voltage Vcc = +5V ±5% • All ISA onboard interrupts are PnP compliant Pentium MMX: 200 233 DMA Channels (ISA) ICC typ.* +5V 2.34A 2.62A • Four 8-bit, three 16-bit +12V 148mA 165mA • Supports scatter / gather, Fast Type-F DMA Pentium: 100 133 166 Flash Memory ICC typ.* +5V 1.71A 1.79A 2.05A • 2 Mb (256 KB) Boot Block for BIOS field upgrade +12V 40mA 161mA 111mA I/O * Measured with 16 MB DRAM, 512 KB cache, keyboard, floppy and hard disk. I/O: SMC FDC37C932 Environmental USB Ports: Two Operating Storage and Transit Serial Ports: Two RS-232 (16C550) with 16 byte FIFO as COM1-4 with BIOS Temperature: 0° to 60°C/32° to 140°F -40° to +85°C/-40° to 158°F selectable IRQs and addressing; serial port 2 BIOS configurable as RS-422/485 (w/airflow) Parallel Port: One bi-directional with all IEEE 1284 protocols supported and Humidity (RNC): 5% to 95% @ 40°C/104°F 5% to 95% @ 40°/104°F BIOS selectable IRQs and addressing non-condensing non-condensing Floppy Disk: Support for two drives (360 KB to 2.88 MB) Altitude: 4,572 m / 15,000 ft 15,240 m / 50,000 ft PCI EIDE: Support for two EIDE drives (master/slave configuration); PIO Shock: 5 G, each axis Mode 5, Bus Master IDE Vibration: 1.5 G, each axis CompactFlash™ Module: Optional bootable CompactFlash™ module interfaces to secondary IDE channel, user upgradeable Reliability • MTBF: >120,000 hours @ 20°C / 68°F (MIL-HDBK-217F) Clock / Calendar • Mouse / keyboard voltage protected by self-resetting fuses • Real-time clock with 256 byte battery backup CMOS RAM • Unique silicon serial number accessible via software Connectors • 2 year limited warranty Rear I/O Bracket: COM1 (DB-9); parallel port (DB-25) Designed to meet or exceed: Headers: Serial ports (two 10-pin shrouded); floppy (34-pin shrouded); EIDE Safety: UL 1950; CSA C22.2 No 950; EN 60950; IEC950 (one 40-pin shrouded); PS/2 mouse (4-pin locking); CPU fan (2-pin locking); PC/104-Plus (120-pin); external power source (6-pin & 5-pin locking); AT EMI/EMC: FCC 47 CFR Part 15/CISPR22; CE Mark to EN55022 / EN50082 keyboard, speaker, reset, EIDE activity LED (16-pin shrouded) Corporate Offices US / Canada Europe, Middle East and Africa Asia Pacific 616 Curé-Boivin Oskar-von-Miller-Strafle 1 6F, No.9, Lane 235, Pao-Chiao Rd., Boisbriand (Québec) Canada J7G 2A7 85386 Eching/Munich Germany Hsin-Tien, Taipei Hsien, 231 Taiwan Tel. (450) 437-5682 Tel. +49 81-65 77 0 Tel. +886-2-2910 3532 Fax (450) 437-8053 Fax +49 81-65 77 219 Fax +886-2-2910 3482 www.kontron.com sales@us.kontron.com sales@de.kontron.com sales@tw.kontron.com The latest version of this document may be found on our web site. Specifications subject to change without notice. Some products may not be available in all regions. Kontron and the Kontron logo are registered trademarks of Kontron Embedded Computers. All other trademarks are the property of their respective owners. Copyright 2001 by Kontron Embedded Computers. All rights reserved. cVIPer825.2_10/2001 Rep.0_10/2001
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the VIPER 825/KAB-01?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Kontron 01014-0201-33-0 CPU Board. MOPSplus 386SX PC/104 CPU Board, 33MHz, 2MB DRAM, 0,9MB Flash-Har...

Kontron 01014-0203-33-0 CPU Board. MOPSplus 386SX | PC/104 | 33MHz | 2MB DRAM | 2 x 9MB Flash-Harddi...

Fanless 166 MHz Pentium MMX, up to 266 MHz (fan), on-board PCI graphic, LAN, USB, COM, LPT, IDE, FDC
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods