®  ETX -eval  ETX® evaluation board  Offers standard PC environment  Reference Design and prototype plattform  Integrated Debug Port If it‘s Embedded, it‘s Kontron. ETX®-eval  Product Overview The absolute highlight is the scaleable processor The ETX®-eval is an ATX motherboard, which fulfills performance. Due to four defined high count plugs it all user requirements. Additionally to the typical is possible to work with different processor modules. interfaces like IDE, FDD, parallel and two serial ports, From AMD Geode™ up to Intel® Core™2 Duo and all the board offers a RJ45 Ethernet and two additional future CPU technology can be inserted. The expensive USB ports. Common used receptacles make it easy replacement of the whole motherboard is obsolete and to connect speakers or microphones directly. The makes upgrading pretty easy. motherboard is expandable via four PCI and three This modularity recommends the ETX®-eval as the ISA slots and is equipped with both ATX and BabyAT ideal carrier board to evaluate the ETX® concept. Even power connectors. This allows the usage of nearly before the completion of the target system is done, every available power supply. As a special feature, the software and application development can be the board offers a standardized FFC connector for started in advance. LVDS panels. A custom cable adaptation for LVDS displays is not neccessary, simple “plug and work“.  Technical Information Keyboard/Mouse USB PS2 mouse and keyboard connector 4 USB Ports, 2 on 4pin USB A connector and 2 on internal pin header Hard Disk Expansion Interface 2x IDE ports 1 PCI slot 32 Bit 1x FDD port Single PC-Card slot, 32 bit with ejector LVDS and CRT interfaces Sound DSUB 15 VGA connector Stereo Line in /out 3,5mm jack-plug Dual Channel LVDS connector JILI (depending on module) Form Factor Ethernet 166mm x 130mm 10/100 MBit from Module (RJ45) and onboard 10/100/1000 MBit 20 pol. ATX power connector Intel® LAN (RJ45) Temperature (*) Legacy Interfaces operation: 0° to 60°C, storage: -25° to 85 °C 1x Parallel port (DSUB 25 female) Humidity 2x Serial ports (DSUB 9 male) operation: 10% to 90%, storage: 5% to 95% (non condensing) PCI and ISA interfaces (*) Ask about extended temperature ranges 4x PCI slots 3x ISA slots  Ordering Information Article Part.-No. Description ETX®-eval 18010-0000-00-0 ATX baseboard for ETX® Modules ETX® Starterkit 18010-0000-00-S Complete Kit including Power Supply, Floppy Drive, CD-ROM Drive and Documentation ETX® miniBaseboard 18028-0000-00-0 miniBaseboard for ETX® modules Diamond Point International (Europe) Ltd Suite 13, Ashford House, Beaufort Court Sir Thomas Longley Road, Rochester, Kent, ME2 4FA, UK Phone 01634 300900 - Fax 01634 722398 - Email sales@dpie.com – Web www.dpie.com www.dpieshop.com #ETX®-eval-05092008#PDL All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is ® ® assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners. DIMM-PC and JUMPtec are registered trademarks of Kontron Embedded Modules GmbH, Germany.