» » C CP P6 69 90 0H HS S « « 6U Hot Swap CompactPCI Carrier Board for 2 PMC Modules » Interface flexibility through a wide range of analog, digital, communication and counter PMC modules. » 66 or 33 MHz on PCI and/or PMC » 64 bit bus master interface » 64 bit PMC interface » Rear I/O on Pn4 » INT A, B, C, D support If it’s embedded, it ’s Kontron. CP690HS CP690HS 6U Hot Swap CompactPCI Carrier Board for 2 PMC Modules The CP690HS was created to provide system designers with a host for mounting the wide range of PMC modules available therefore no driver is required to manage data transfer on the open market. between the PMC module and the CPCI bus. The CP690HS, which carries two PMC modules, has been For Hot-Swapping the CP690HS a software driver is required designed to enable the user to take full advantage of the for supporting the Hot-Swap relevant part of the board. cost-effective solutions afforded by industrial PMC modules. Use of the 6U CP690HS provides the opportunity to On this 6U carrier board you have the possibility to enable utilize any two PMC modules simultaneously. This feature Rear I/O on the Pn4 connector of the PMC module. The maximizes flexibility and versatility, enabling the operator upper PMC module is connected to J5 of the CPCI bus and to tailor the CP690HS to meet precisely his specific input/ the lower PMC module is connected to J3 of the CPCI bus. output requirement. Kontron’s CP690HS is completely softwaretransparent and Technical Information CompactPCI Interface 64 and 3 bit/ 66 and 33 MHz, Compact PCI specification v..1 compatible with busmaster DMA, interrupt level INT A, B, C, D support, 3.3 V/5.0 V operation and full Plug&Play compatibility. Rear I/O on P3 (lower PMC) and P5 (upper PMC) PMC Carrier Interface Compatible with P1386 specification v. .0, 64 and 3-bit / 66 MHz 3.3 V / 33 MHz 3.3V, configurable to 5V Interrupt level INT A, B, C, D routed directly to Compact PCI Rear I/O on Pn4 Characteristics Pericom 7C8154 with Hot Swap circuitry. Blue Led indication and microswitch for safe board removal Hardware-controlled power ramp up Local reset generation Signal precharge Depends on PMC module. Software Support Front-Panel:  cutouts for PMC module Common Power Consumption: 0. Watt without a PMC module Dimensions: 6 U/4 HP (33 x 160 mm) Temp. Ranges: 0 °C to + 60 °C (standard) -5 °C to +75 °C (extended) -55 °C to +85 °C (storage) Operating Humidity: 0% to 95% (non-condensing) Weight: 80 g MTBF: 416.000 h Ordering Information Article Part.-No. Description 108-5571 64 bit, 33 MHz, 5.0 VI/O, 6U dual PMC carrier board with Rear I/O on J3/J5 CP690HS-33 108-557 64 bit, 66 MHz, 3.3 VI/O, 6U dual PMC carrier board with Rear I/O on J3/J5 CP690HS-66 KIT-CP690 1898 User`s manual documentation in PDF format on 3.5“ floppy disk VXW-DRV-HS 841 VxWorks driver for Hot Swap LIN-DRV-HS 3450 Linux driver for Hot Swap CORPORATE OffICES Europe, Middle East & Africa North America Asia Pacific Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP. 85386 Eching/Munich Poway, CA 9064-7147 188 Southern West 4th Ring Road Germany USA Beijing 100070, P.R.China Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 94 4558 Tel.: + 86 10 63751188 Fax: +49 (0)8165/ 77 79 Fax: +1 858 677 0898 Fax: + 86 10 8368438 info@kontron.com info@us.kontron.com info@kontron.cn  www.kontron.com #CP690# 0408009PDL All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners.