KONTRON CP6003-RA-Q2.1-8G-E1X
Specifications
Form Factor
PICMG
Battery Input
1 Rear I/O
Compliancy
CompactPCI Core Specification PICMG 2.0 Rev. 3.0, CompactPCI Hot Swap Specification PICMG 2.1 R2.0, CompactPCI System Management PICMG 2.9 R1.0, CompactPCI Packet Switching Backplane PICMG 2.16 R1.0, Designed to meet or exceed: Safety: UL 1950, UL 94, CSA 22.2 No 950, EN 60950, IEC 950, EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2
CPCI Bus
PICMG 2.0 Rev. 3.0 compatible, 64-bit / 66 MHz, Universal V(I/O) 5V or 3.3V signaling, Operating in system slot as system master and in peripheral slot in PCI passive mode (no communication to CompactPCI bus)
Dimensions
233 x 160 x 20.5 mm, 6U, 4HP
DVI/HDMI
2 Rear I/O
Environmental
CP6003-RA-Quad-Core: VITA 47 V2/OS1, -40° to +55°C, forced air cooling required, Dual-Core LV: VITA 47 V2/OS1 -40° to +70°C, forced air cooling required; CP6003-RC-Quad-Core: VITA 47 V3/OS2 -40° to +55°C, Dual-Core LV: VITA 47 V3/OS2 -40° to +70°C, EN50022 class B, EN55024, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11; coating standard for CP6003-RC; on request for CP6003-RAt
Ethernet
3 Front I/O(On CP6003-RA only), CP6003-RA 2 rear I/O + 3 front I/O, 2 of them switchable to rear I/O
FAN control
2 Rear I/O
Flash BIOS
Two redundant 8 MByte SPI Flashes
Gigabit Ethernet
3x Gigabit Ethernet channel, 2 switchable to rear I/O (on CP6003-RA version only)
CP6003-RC: 4 ports 10/100/1000BASE-T to rear I/O, CP6003-RA: 2 ports according PICMG2.16, 3 ports front I/O; 2 of them switchable to rear I/O
HD Audio
1 Rear I/O
IPMI
IPMI 1.5-compliant for IPMI based management and CompactPCI System Management PICMG 2.9 R1.0
Micro Switch
For Hot Swap and reset
Monitor
Displayport connector (adapters for VGA available) (on CP6003-RA version only)
MTBF
153663h MIL-HDBK-217 FN2 Ground Benign 30°, 103883h Bellcore Issue 6 Ground Benign 30°
NAND Flash
Socket for optional Kontron Solid State Drive
Platform Controller Hub
Intel QM67
PMC / XMC
1/1 Onboard Connector
PMC/XMC
One 64-bit / 133 MHz conduction cooled PMC slot, Pn1-Pn4, rear I/O Pn3 to J4, 3.3 volt V(I/O), Alternatively one conduction cooled XMC slot via P15, supporting XMC.3 x8 PCIExpress
Power Consumption
Maximum: up to 60 watts (quad-core), 40 watts (dual-core)
Processor
Intel Core i7
Intel Core i7 Processor Second Generation (32 nm manufacturing process)., Intel Core i7-2715QE (quad core) or Intel Core i7-2655LE (dual core) low voltage processor.
Rear I/O
J3: 2x ETH acc. PICMG 2.16, 2x ETH, VGA, COM 1/2, 4x USB, GPIO, Speaker, fan sense, J4: PMC rear I/O, J5: 4x SATA, 2xHDMI, HDA, battery, fan control, additional GPIO
SATA
4 Rear I/O
SATA / NAND Flash
Four SATA ports fixed to rear I/O (SATA 3Gb/s), One onboard SATA channel available for mounting an optional Kontron SSD (SATA 6Gb/s)
SATA NAND Flash
1 Onboard Connector
Serial
1 Front I/O(On CP6003-RA only), 2 Rear I/O
1x RS232 serial interface (on CP6003-RA version only)
Serial Ports
CP6003-RA: 1x RS232 (routed to front and rear I/O) and 1x RS232/RS422 fixed to rear I/O, CP6003-RC: 1x RS232 and 1x RS232/422 fixed to rear I/O
SMB
1 Rear I/O
Software Support
AMI EFI (BIOS) with POST codes, setup console redirection to serial port (VT100 mode) with CMOS setup access., BIOS parameters saved in EEPROM, diskless, keyboardless, videoless operation., LAN boot support, Board identification number accessible via EEPROM, Support for Windows 7, XP, XP Embedded, Windows Server 2008R2, Linux, VxWorks, (other OSs may be possible, please contact us for information)
Status LED
For Hot Swap and Ethernet status information
Supervisory Functions, Clock/Calendar
Watchdog, software configurable, 125 msec to 256 sec, generates IRQ or hardware reset. Hardware monitor for thermal control, fan speed, and all onboard voltages, RTC battery backup
System Memory
Up to 16GB soldered dual channel DDR3 memory with ECC and data speed of up to 1333 MHz per channel
TPM
Optional Trusted Platform Module (TPM) 1.2 for enhanced hardware and software based data and system security
USB 2.0
2 Front I/O(On CP6003-RA only), 4 Rear I/O
USB Interface
2x USB2.0 interface (on CP6003-RA version only)
Video CRT
1 Rear I/O
Weight
Approx. 800gr
Features
- 4HP, single slot quad or dual core CPU rugged air or conduction cooled
- 5x GigEthernet Interfaces via PCIExpress
- Latest IO technology with SATA Gen 3, RAID, SSD
- Rear I/O supporting PICMG 2.16
- Scalable processor speed, Intel Core i7 up to 2.2 GHz
- Up to 16GB DDR3 1333 MHz soldered memory with ECC
- XMC/PMC + SSD Flash configuration possible
Datasheet
Extracted Text
» CP6003-RA/RC « Rugged Intel® Second Generation Core™ i7 CompactPCI® Processor Board » Dual- or Quad-Core Performance Second Generation Intel® Core™ i7 processor with up to 16 GByte Soldered Memory » Ruggedized Rugged Air and Conduction Cooled Low Power Processor Board » Highest Versatility and Excellent Power Management Comprehensive I/O capabilities: GigEthernet, PMC/XMC, USB, VGA, DVI, RAID, NAND Flash … » Broad Software Support Complete Board Support Packages for On Board Hardware and Toolchain The pulse of innovation Kontron Datasheet CP6003-RA/RC Rugged Intel® Second Generation Core™ i7 Processor Board Rugged applications are mainly determined by high shock, vibration, the 2.1 GHz Intel® Core™ i7-2715QE and the LV 2.2 GHz Intel® Core™i7- and temperature levels. The Kontron 6U CompactPCI® processor 2655LE, the CP6003-RA/RC has extraordinary performance per watt boards CP6003-RA and CP6003-RC are the fi rst choice, when values. Up to 16 GByte of soldered DDR3 1333 MHz memory with ECC computing performance is required in rugged air or conduction provide the foundation of demanding software applications. Based on cooled 6U CompactPCI® systems. the Intel® Mobile QM67 I/O controller hub the CP6003-RA/RC provides high graphics performance for VGA and two independent digital video The CP6003-RA/RC, a CompactPCI® PICMG 2.16 compliant 6U CPU board, outputs to the rear I/O as well as HDA audio capabilities. comes with various rugged levels, making it yet another addition to Kontron’s rugged PICMG 2.16 portfolio. Based on the Intel® Core™ i7 Comprehensive Versatility second generation processor and the QM67 platform controller hub, the Besides the outstanding graphics performance, the CP6003-RA/RC CP6003-RA/RC is featured by dual or quad core computing performance offers comprehensive I/O capability with up to 5 x 1Gb Ethernet, 4 x at a reasonable thermal design power, including a complete set of data, rear I/O SATA with RAID 0/1/5/10 functionality, a local SATA Flash disk communication and multimedia interfaces. connector, as well as 6 x USB 2.0, 2 x COM. It can also accommodate a conduction cooled PMC/XMC slot for I/O intensive applications. Maximum Ruggedization Designed to withstand even the toughest environmental conditions, the Unique Security passively cooled CP6003-RA/RC featured by soldered memory including The board provides safety and security via an optional trusted platform ECC and industrial grade fl ash modules comes in two rugged levels – module, (TPM 1.2), two redundant fi rmware hubs (failover) and IPMI defi ned as RA and RC. support according PICMG 2.9 R1.0. The CP6003-RA version is designed for harsh application requirements in Long-term Availability air-cooled environments, where the CP6003-RC is made for conduction Delivering a stable product based on Intel®’s embedded product line the cooled environments. Depending on the processor type, both versions CP6003-RA/RC ensures long-term availability. are available in extended temperature ranges from -40°C to +70°C. With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www.kontron.com Kontron Datasheet Technical Information Processor Intel® Core™ i7 Processor Second Generation (32 nm manufacturing process) Intel® Core™ i7-2715QE (quad core) or Intel® Core™ i7-2655LE (dual core) low voltage processor Platform Controller Hub Intel® QM67 Memory System Memory Up to 16GB soldered dual channel DDR3 memory with ECC and data speed of up to 1333 MHz per channel NAND Flash Socket for optional Kontron Solid State Drive Flash BIOS Two redundant 8 MByte SPI Flashes Front Panel Functions Gigabit Ethernet 3x Gigabit Ethernet channel, 2 switchable to rear I/O* USB Interface 2x USB2.0 interface* Serial 1x RS232 serial interface* Monitor Displayport connector (adapters for VGA available)* Micro Switch For Hot Swap and reset Status LED For Hot Swap and Ethernet status information *on CP6003-RA version only Onboard Interfaces Gigabit Ethernet CP6003-RC: 4 ports 10/100/1000BASE-T to rear I/O CP6003-RA: 2 ports according PICMG2.16, 3 ports front I/O; 2 of them switchable to rear I/O SATA / NAND Flash Four SATA ports fi xed to rear I/O (SATA 3Gb/s) One onboard SATA channel available for mounting an optional Kontron SSD (SATA 6Gb/s) Serial Ports CP6003-RA: 1x RS232 (routed to front and rear I/O) and 1x RS232/RS422 fi xed to rear I/O CP6003-RC: 1x RS232 and 1x RS232/422 fi xed to rear I/O CPCI Bus PICMG 2.0 Rev. 3.0 compatible, 64-bit / 66 MHz Universal V(I/O) 5V or 3.3V signaling Operating in system slot as system master and in peripheral slot in PCI passive mode (no communication to CompactPCI® bus) PMC/XMC One 64-bit / 133 MHz conduction cooled PMC slot, Pn1-Pn4, rear I/O Pn3 to J4, 3.3 volt V(I/O) Alternatively one conduction cooled XMC slot via P15, supporting XMC.3 x8 PCIExpress Rear I/O J3: 2x ETH acc. PICMG 2.16, 2x ETH, VGA, COM 1/2, 4x USB, GPIO, Speaker, fan sense J4: PMC rear I/O J5: 4x SATA, 2xHDMI, HDA, battery, fan control, additional GPIO Supervisory Functions, Watchdog, software confi gurable, 125 msec to 256 sec, generates IRQ or hardware reset. Clock/Calendar Hardware monitor for thermal control, fan speed, and all onboard voltages RTC battery backup IPMI IPMI 1.5-compliant for IPMI based management and CompactPCI® System Management PICMG 2.9 R1.0 Optional Trusted Platform Module (TPM) 1.2 for enhanced hardware and software based data and system security TPM I/O Table Summary Description Front I/O Rear I/O Onboard Connector Total Video CRT -1 -1 DVI/HDMI - 2 - 2 USB 2.0 2* 4 - 4 (6*) HD Audio -1 -1 Serial 1* 2 - - Ethernet 3* 4 (4**) - 4 (5*) SATA -4 -4 SATA NAND Flash --1 1 PMC / XMC - - 1/1 1/1 FAN control -2 -2 Battery Input -1 -1 SMB -1 -1 *) On CP6003-RA only **) CP6003-RA 2 rear I/O + 3 front I/O, 2 of them switchable to rear I/O Compliancy CompactPCI® Core Specifi cation PICMG 2.0 Rev. 3.0 CompactPCI® Hot Swap Specifi cation PICMG 2.1 R2.0 CompactPCI® System Management PICMG 2.9 R1.0 CompactPCI® Packet Switching Backplane PICMG 2.16 R1.0 Designed to meet or exceed: » Safety: UL 1950, UL 94, CSA 22.2 No 950, EN 60950, IEC 950 » EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2 3 3 w ww ww w.k .kont ontr ron.com on.com Kontron Datasheet Technical Information (continued) MTBF 153663h MIL-HDBK-217 FN2 Ground Benign 30° 103883h Bellcore Issue 6 Ground Benign 30° Dimensions 233 x 160 x 20.5 mm, 6U, 4HP Approx. 800gr Weight Software Support AMI EFI (BIOS) with POST codes, setup console redirection to serial port (VT100 mode) with CMOS setup access. BIOS parameters saved in EEPROM, diskless, keyboardless, videoless operation. LAN boot support Board identifi cation number accessible via EEPROM Support for Windows® 7, XP, XP Embedded, Windows® Server 2008R2, Linux®, VxWorks® (other OSs may be possible, please contact us for information) Power Consumption Maximum: up to 60 watts (quad-core), 40 watts (dual-core) » CP6003-RA Environmental Quad-Core: VITA 47 V2/OS1, -40° to +55°C, forced air cooling required Dual-Core LV: VITA 47 V2/OS1 -40° to +70°C, forced air cooling required » CP6003-RC Quad-Core: VITA 47 V3/OS2 -40° to +55°C Dual-Core LV: VITA 47 V3/OS2 -40° to +70°C EN50022 class B EN55024 EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11 » Coating standard for CP6003-RC; on request for CP6003-RA Ordering Information Article Description CPU Boards CP6003-RA-Q2.1-8G-E1X » Quad-Core 2.1 GHz, Core i7-2715QE » Temperature range -40 to +55°C » 8GB soldered dual channel DDR3 memory 1333 MHz with ECC » Rugged air cooled » Dual-Core 2.2 GHz, Core i7-2655LE » Temperature range -40 to +70°C CP6003-RA-2.2-4G-E1X » 4GB soldered dual channel DDR3 memory 1333 MHz with ECC » Rugged air cooled CP6003-RC-Q2.1-8G-E1X-CC » Quad-Core 2.1 GHz, Core i7-2715QE » Temperature range -40 to +55°C » 8GB soldered dual channel DDR3 memory 1333 MHz with ECC » Rugged conduction cooled, conformal coating CP6003-RC-2.2-4G-E1X-CC » Dual-Core 2.2 GHz, Core i7-2655LE » Temperature range -40 to +70°C » 4GB soldered dual channel DDR3 memory 1333 MHz with ECC » Rugged conduction cooled, conformal coating All: Extended temperature versions on request. Accessories Flash-SATA Various Kontron SSD products / sizes avaliable Adapter cable DisplayPort to DVI, 19 cm CABLE-GRAPHIC-DP-TO-DVI Rear Transition Modules Several versions on request Software Support KIT-CP6003 Documentation and Windows driver kit, available on the Web Windows XP Embedded BSP CP6003, available on the Web WXPE-BSP-CP6003 LIN-BSP-CP6003 Linux BSP CP6003 for Fedora and RedHat, available on the Web VxWorks BSP 6.x SMP support, available on the Web VXW-BSP-CP6003 CORPORATE OFFICES Europe, Middle East & Africa North America Asia Pacifi c Lise-Meitner-Str. 3-5 14118 Stowe Drive 17 Building,Block #1, ABP. 86156 Augsburg Poway, CA 92064-7147 188 Southern West 4th Ring Road Germany USA Beijing 100070, P.R.China Tel.: + 49 (0) 821 4086-0 Tel.: + 1 888 294 4558 Tel.: + 86 10 63751188 ( ) Fax: + 49 0 821 4086 111 Fax: + 1 858 677 0898 Fax: + 86 10 83682438 sales@kontron.com info@us.kontron.com info@kontron.cn 4 4 w ww ww w.k .kont ontr ron.com on.com Datasheet – CP6003-RA/RC #02212013WMH All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners.
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the CP6003-RA-Q2.1-8G-E1X?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Kontron 01014-0201-33-0 CPU Board. MOPSplus 386SX PC/104 CPU Board, 33MHz, 2MB DRAM, 0,9MB Flash-Har...

Kontron 01014-0203-33-0 CPU Board. MOPSplus 386SX | PC/104 | 33MHz | 2MB DRAM | 2 x 9MB Flash-Harddi...

Fanless 166 MHz Pentium MMX, up to 266 MHz (fan), on-board PCI graphic, LAN, USB, COM, LPT, IDE, FDC
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods