CP6001-V » » C CP P6 60 00 01 1- -V V « « Intel® Celeron® M 6U CompactPCI PICMG 2.16 Value Line CPU » Industrial Features - Cost Optimized High computing, graphics and Ethernet performance » Minimum Power Consumption Intel® Celeron® M440 processor, 1.86 GHz, 24W typical » Highest Versatility and Excellent Power Management Comprehensive I/O capabilities: GigEthernet, PMC, USB, VGA, SATA, USB NAND Flash … » Complete Board Support Packages for On Board Hardware and Toolchain If it’s embedded, it ’s Kontron. CP6001-V CP6001-V Intel® Celeron® M 6U CompactPCI PICMG 2.16 Value Line CPU Kontron introduces the CP6001-V, a new Value Line optional onboard 2.5 inch hard disk can all be used at CompactPCI board in 6U height. It comes with the the same time in a single 4HP slot. Utilizing the modular Intel® Celeron® M 440 processor 1.86 GHz and is extensions, all industrial requirements for write-protected designed for price-sensitive applications. operating systems and data storage capabilities are supported. The CP6001-V CompactPCI system controller board Two Gigabit Ethernet interfaces available at the front combines the capabilities of an all in one industrial panel operate independently of the additional two PICMG PC with the advantages of a robust and low power 6U 2.16 compliant Ethernet channels, which are routed to CompactPCI design. the backplane. Minimum power consumption The highly versatile CP6001-V can be used in a system The CP6001-V incorporates the 1.86 GHz Celeron® M 440 or peripheral slot. A rich set of LEDs is available at the providing excellent performance and power dissipation frontpanel for debugging and diagnostic purposes. figures for up-to-date industrial applications. Optimized cost-value ratio All-in-one industrial PC The CP6001-V is tailored for cost-sensitive applications The 4HP single-slot, space-saving board comes with all without compromising on the processor performance. necessary industry-required interfaces such as a serial The optimized cost-value ratio is achieved via the port, VGA graphics interface, Ethernet access, USB ports, graphic support provided by the chipset, memory as two PMC, HDD and USB flash disk support. commercial off-the-shelf 533 MHz DDR2 SO-DIMM sockets, With the integrated graphics accelerator the 945GM a fully integrated IO controller hub and taking advantage provides high-resolution graphics up to 2048 x 1536 of selecting value oriented components. pixel @75 Hz and 2D/3D multimedia-quality video. Software Support The 945GM enables balanced memory usage between The CP6001-V is provided with a complete and self- graphics and system for optimized performance (up to installing Board Support Package for Microsoft Windows® 128 MB of dynamic video memory allocation). XP, Windows® XP Embedded and Linux®. The onboard The Intel® ICH7-R I/O Controller Hub provides advanced temperature and voltage sensors can be monitored, the I/O technology including USB 2.0 and Serial ATA300. front panel LEDs, hardware watchdog and timer can be The PMC site, USB Flash, CompactFlash socket and an triggered to support application specific features. 2 www.kontron.com CP6001-V Technical Information Processor Intel® Celeron® M 440 Processor in μFCBGA package, 1.86 GHz, 533 MHz FSB, 1 MB L2 cache Chipset - Intel® 945GM Express chipset with dual-channel DDR2 memory controller - Intel® ICH7-R, 4x SATA II controllers, 7x USB 2.0 (3x used), 6x PCI Express x1, LPC Memory - Dual channel DDR2 memory and data speed of 533 MHz per channel, and up to 4 GB on two SO-DIMM sockets - Up to 8 GB NAND Flash Module - Single 1MB Firmware Hub - Serial EEPROM (24LC64) 64 kbit Onboard Controller - Gigabit Ethernet: four Intel® 82574L Gigabit Ethernet PCI Express controllers, two front I/O and two rear I/O interfaces - Intel® 945GM internal graphic controller with up to 128 MB shared video memory - Watchdog: FPGA-based, software configurable, two-stage Watchdog with programmable timeout ranging from 125 ms to 256 s in 12 steps - RTC, integrated in ICH7-R - Super I/O: 1x UART for RS-232 - Serial ports: one COM1 port at the front System Interconnect - USB NAND Flash: One USB port of the ICH7-R is routed to a dedicated onboard connector, where USB-NAND-Flash modules can be connected - SATA: two Serial ATA II ports - One onboard SATA interface routed to a standard SATA connector - One available for an optional 2.5” onboard HDD - PMC: one 32-bit / 33 MHz PCI PMC slot, 3.3V PCI signalling only Front Panel Functions Ethernet 2 x 1000/100/10 Base Ethernet on RJ45 VGA 1 x 15-Pin D-Sub connector for standard analog displays COM 1x RS232 UART interface on RJ45 connector USB 2x USB 2.0 ports, 4-pin standard USB host connectors PMC opening for PMC front panel LEDs 2x LAN activity (yellow) and speed (green), 1x blue control LED for hot swap, 1x watchdog, 1x thermal control, 2x general purpose LEDs Reset Reset button, guarded Micro switch For hot swap I/O Table Summary Front I/O Rear I/O Onboard Connector Total Video CRT VGA 1 - - 1 USB 2 - 1 (Flash) 3 Serial 1 - - 1 Ethernet 2 2 - 4 SATA - - 2 2 PATA - - 1 (CF) 1 USB-Flash - - 1 1 PMC - - Pn1/Pn2 1 CompactPCI Bus Interface - PICMG 2.0, 32-bit / 66 MHz - Universal signaling, REQ/GNT for 7 slots - Operating in system slot as system master and in peripheral slot in PCI passive mode (no communication to CompactPCI bus) Rear I/O via J3 - J3: Two PICMG 2.16 rear I/O Gigabit Ethernet 1000BASE-T ports Compliancy - CompactPCI Core Specification PICMG 2.0 Rev. 3.0 - CompactPCI Hot Swap Specification PICMG 2.1 R2.0 - CompactPCI Packet Switching Backplane PICMG 2.16 R1.0 Designed to meet or exceed: - Safety: UL 1950, UL 94, CSA 22.2 No 950, EN 60950, IEC 950 - EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2 General Dimensions 233 x 160 x 20.5 mm, 6U, 4HP Weight 550g MTBF CP6001-V: 255596h / MIL-HDBK-217 FN2 / Ground Benign 30° CP6001-V: 328068h / Bellcore Issue 6 / Ground Benign 30° Temperature Range 0°C to +60ºC, passive module heat sink, forced system airflow required Humidity 93% RH at 40 °C, non-condensing (acc. to IEC 60068-2-78) Power Supply +12V Hot Swap controller, PMC -12V optional PMC +5V onboard +3.3V onboard Power Consumption max. 28W Software Support - AMI BIOS with POST codes - Setup console redirection to serial port (VT100 mode) with CMOS setup access - BIOS parameters saved in EEPROM - Diskless, keyboardless, videoless operation, LAN boot support - Board identification number accessible via EEPROM - Support for Windows® XP, XP Embedded, Linux® (other OSs may be possible, please contact us for information) 3 www.kontron.com CP6001-V Ordering Information Article Order-No. Description CPU Boards 1022-5190 6U 4HP CPCI Intel® Celeron® M 440 System Master CPU, 1.86 GHz, 1MB L2, 2 GB DDR2 533 MHz SO-DIMM CP6001-V-1.86-2G I/O: 4x GigE, VGA, COM, 2x USB, 2x SATA, USB Flash Sockel, CompactFlash socket, J1-J3 Services 1) 1022-6822 Mounting kit for 2,5” SATA-HDD onboard, mounting within 4HP CP6001-V-MK2.5SATA Rear Transition Modules CP-RIO6-001 37459 4HP RTM for CP6001-V; only two rear LAN channels are supported Software Support 2) 36894 Documentation and 32-bit Windows (XP, XP Embedded) driver kit on CD-ROM KIT-CP6001 2) LIN-BSP-CP6001 36895 Documentation and 32 bit Linux BSP for Suse and RedHat distributions on CD-ROM (other operating systems) Other operating systems support kits (e.g. 64-bit versions) on project request) 1) HDD must be ordered separately 2) Free of charge, downloadable from the Internet Please contact your local sales representative for other configuration options. CORPORATE OFFICES Europe, Middle East & Africa North America Asia Pacific Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP. 85386 Eching/Munich Poway, CA 92064-7147 188 Southern West 4th Ring Road Germany USA Beijing 100070, P.R.China Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: + 86 10 63751188 Fax: +49 (0)8165/ 77 279 Fax: +1 858 677 0898 Fax: + 86 10 83682438 info@kontron.com info@us.kontron.com info@kontron.cn 4 www.kontron.com #CP6001-V# 03152011AR All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners.