� Powered by Intel®’s latest � CP302 Mobile Pentium® III processor, the CP302 combines outstand- ing performance with a rugged ® � Mobile Pentium III design for harsh operational environments and comes 3U CompactPCI CPU complete with full PC functionality. Features include: � Intel® Mobile Pentium® III / BGA 400/500/700 MHz � System Master and Peripheral Master CPU versions � Shock / Vibration and extended temperature resistant � Up to 384 MByte SDRAM � 64-bit CompactPCI interface � Peripheral Hot Swap support � Fast Ethernet � On-board high resolution AGP/VGA � Ultra/DMA IDE and standard PC interfaces � PMC extension � Optional Rear I/O support � BIOS with LAN Boot feature � CPU doubles as system master and peripheral master with front or rear I/O. The CP302 features innovative technology in a robust design which incorporates a passive cooling solution for the Mobile Pentium® III processor together with soldered SDRAM supporting ECC, making it ideally suited for harsh and rugged embedded PC applications in industrial environments. The CompactPCI revision 3.0 compliant CP302 features the very An optional flash-disk module available either as a DiskOnChip latest Mobile Pentium® III chip in 0.18 micron technology with a flash or as an EIDE-compatible flash module meets the need for 256 kByte on-die full speed L2 cache and the new Advanced use in harsh operating conditions. Optionally, the CPU can also be Transfer Cache technology boosting performance by up to 25% ordered with an IDE-compatible hard disk or Flash module. at the same clock speed over previous Pentium®III processors. The connections for peripherals are optionally available in the By using the Mobile Pentium the CP302 offers significant benefits form of rear I/O at the back, thus simplifying the system cabling. for demanding industrial applications by combining outstanding Two rear I/O modules 4HP and 8HP are available. performance with embedded technology: • thin chip profile enabling passive cooling on 4 HP The CP302 is also available as a peripheral master in order to max- • a case temperature of 100 °C allowing operation at extended imize the number of independent CPU´s that may be added in temperature range peripheral slots. A non-transparent PCI-PCI bridge isolates the • reduced power consumption by operating at 1.35V. CP302-PM in respect to addressing and configuration from the system master CPU. In addition to the standard PC interfaces such as PS/2 keyboard / mouse, LPT, EIDE, floppy disk and two COM interfaces, the CPU A TCP/IP connection through the CPCI bus can be provided by also offers a 64-bit AGP video controller with a maximum resolu- means of the multiprocessing software RackNET from KONTRON. tion of 1600x1200 pixels, plus a USB and 10/100Base-TX Ethernet interface. Offering the full range of features, the CP302 provides CP302 CP302 Keyboard Keyboard all the functionality of a standard PC and is compatible with off- PMC PMC the-shelf operating systems. RST TMP RST TMP RST RST The modular and scalable design of the CP302 permits it to be � CP302 - Front Panel CP302 CP302 Keyboard Keyboard ACT. SPEED ACT. SPEED used as a single slot solution occupying only one CompactPCI RST TMP RST TMP slot and thus achieving the highest functionality for space-limited RST applications. In addition various 8HP/12HP versions with ACT. SPEED different I/O connection possibilities to maximize the adaptability ACT. SPEED of the CP302 to user requirements are available. SVGA Fast Ethernet SVGA USB SVGA Fast Ethernet SVGA USB SVGA Fast Ethernet SVGA USB COM1 COM2 LPT1 SVGA Fast Ethernet SVGA USB COM1 COM2 LPT1 � CP302 - Ordering Information Product Description Order No. ® CP302-BASE 1) Mobile Pentium III 500MHz, 128MByte SDRAM 21944 ® CP302-BASE-E2 1) Mobile Pentium III 400MHz, 128MByte SDRAM, –40/+85°C 22254 ® CP302-BRIO 1) Mobile Pentium III 500MHz, 128MByte SDRAM, Rear I/O 21962 ® CP302-BRIO-E2 1) Mobile Pentium III 400MHz, 128MByte SDRAM, Rear I/O, –40/+85°C 22262 CP302-EXT-STD 4HP front panel extension module (Ethernet, VGA, USB, PS/2, Reset, LED’s) 21577 CP302-EXT-IOIDE 8HP (additional to 4HP COM1/2, LPT1; 2.5” hard disk or ATA flash possible) 22129 CP302-EXT-PMC 8HP (additional to 4HP PMC slot 32bit PCI) 21362 CP302-EXT-PMCIO 12HP (additional to 4HP COM1/2, LPT1, PMC slot 32bit PCI) 21580 ® CP302-PM 1) Mobile Pentium III 500MHz, 128MByte SDRAM 22539 ® CP302-PM-E2 1) Mobile Pentium III 400MHz, 128MByte SDRAM, –40/+85°C 22556 CP302-PM-EXT-STD 4HP front panel extension module for PM (Ethernet, VGA, USB, PS/2, Reset, LED’s) 22222 CP-RIO3-01 4HP rear I/O module (Ethernet, COM1/2, onboard IDE connector) 21971 CP-RIO3-01 8HP rear I/O module (additional to 4HP VGA, USB1/2, PS/2, LED) 21972 DMSO-64 SODIMM, 64MByte SDRAM 144pin PC100 21102 DMSO-128 SODIMM 128MByte SDRAM 144pin PC100 21337 DMSO-256 SODIMM 256MByte SDRAM 144pin PC100 21338 FLD-48 2) 48 MByte DiskOnChip™ 19646 FLD-72 2) 72 MByte DiskOnChip™ 19369 FLD-96 2) 96 MByte DiskOnChip™ 22146 CP-HDD-2.5-IDE Notebook-style 2.5” Hard disk 10GB or higher for board mounting 22531 CP-FLD-2.5-IDE Notebook-style 2.5” Flash module 128MB or higher for board mounting 22545 CP-ADAP-PS2-YCABLE Y–cable, PS/2 mouse/keyboard adapter 18803 CP-ADAP-FD Floppy adapter for connection to standard floppy interface if 4HP front panel 20536 WNT-RACKNET 2) TCP/IP multiprocessing communication on PCI bus for Windows NT 20284 KIT-CP302 Drivers, Windows NT setup utilities, user’s manual in PDF format on 3.5” floppy disk 20314 VXW-BSP-CP302 VxWorks Board Support Package for use with Tornado on 3.5” floppy disk 20534 Note: 1) A front panel extension module needs to be ordered in conjunction with a BASE, BRIO or PM board. Users of the 4HP version will require the adapter cable CP-ADAP-FD to connect a FDD to the onboard high density connector. Other configuration options for volume orders are available on request. 2) Others on request. Q Q U U A A D D L L E E I I II T T F F I I Y Y � CP302 - Technical Specifications Processor CompactPCI Bus Interface • Pentium®III, BGA, Intel® embedded low power line • PICMG 2.0 Rev. 3.0 compatible, universal signaling 400MHz low power dissipation, ext. temperature range • 64-bit/33 MHz (Rear I/O version 32-bit/33 MHz) 500MHz high performance (faster when available) • Access to additional 7 CPCI slots 32-bit/33 MHz (8HP) • 256 kByte full speed L2 on-die cache, Intel 440BX Supervisory Functions Memory • Watchdog, software configurable, 125 msec to 256 sec • 100 MHz system memory bus generates IRQ, SMI or hardware reset • 64 MByte up to 128 MByte soldered SDRAM with ECC • Hardware monitor for thermal control and onboard voltages • 64 MByte up to 256 MByte by 144-pin SODIMM (3.3/5.0V) • DIL socket for Flash / SRAM, up to 512 kB • optional DiskOnChip™ module up to 96 MByte Clock/Calendar • RTC and CMOS RAM with backup, battery replaceable I/O • SMSC FDC37C672 providing the following functions: Rear I/O via J2/P2 • Two 16C550 compatible UARTs • 4HP module: Ethernet ,COM1/2, 2nd EIDE • Keyboard and mouse interface • Additional on 8HP: Mouse / Keyboard, 2uUSB, VGA, (CP302 rear • Floppy disk controller up to 2.88 MB I/O version with 32-bit/33 MHz CPCI) • Parallel port ECP/EPP compatible • One USB interface Hot-Swap • Two EIDE interfaces, one on-onboard, 2nd via rear I/O • Support for all signals to allow peripheral boards to be hot swapped. The individual clocks for each slot and access to the AGP/VGA Video Controller backplane ENUM# signal comply with the PICMG 2.1 Hot-Swap • Controller: C&T 69030 with 4MB VRAM specification. • Resolution: up to 1600u1200u16 @ 60Hz • Flat panel interface on 8HP-I/O solution via pin row connector. General Dimensions: 100 mmu160 mm, 4HP, 8HP, 12HP Ethernet Interface Weight: 300 g • Intel® 82559, 100Base-TX, UTP CAT-5 MTBF: 101.000 h Front Panel Functions Software Support 4HP • 256 KByte Flash containing Award BIOS with POST codes, • Keyboard/Mouse: PS/2 6-pin mini-DIN setup console redirection to serial port (VT100 mode) with • Ethernet: RJ-45 CMOS setup access, BIOS parameters saved in EEPROM, • VGA: 15-pin D-Sub SVGA connector diskless, keyboardless, videoless operation • USB: 4-pin connector • Support for Windows® NT /NTE, VxWorks®,QNX®. • LEDs: ACT, SPEED (LAN), TMP Thermal • Reset: Reset button, guarded Power Consumption 8HP-IO • +5V/4.5W, +3.3V/9W typ. At 400MHz/64MB • COM1/2: 9-pin D-Sub (RS232, RS422, RS485) • +/–12V (connected to PMC) • LPT: 26-pin high density D-Sub • Optional with 2.5” EIDE Flash Disk or Hard Disk Environmental • 8HP-PMC: Cut out for PMC front panel Operating temp.: 0 °C to +60 °C standard • 12HP: All I/O´s and PMC (no 2.5” IDE drive possible) –25 °C to +75 °C E1 (optional) –40 °C to +85 °C E2 (optional) On-board Interfaces Storage temp.: –55 °C to +95 °C • One IDE connector supporting Ultra DMA Operating humidity: 0% to 95% non-condensing • One floppy disk connector (up to 2.88 MByte); 4HP with high Altitude: 50,000 ft. (15,240 m) density connector (adapter required) DIN ISO 9001 Reg. No. 0548 - 02 Corporate Offices US / Canada Europe, Middle East and Africa Asia Pacific 616 Curé-Boivin Oskar-von-Miller-Straţe 1 6F, No.9, Lane 235, Pao-Chiao Rd., Boisbriand (Québec) Canada J7G 2A7 85386 Eching/Munich Germany Hsin-Tien, Taipei Hsien, 231 Taiwan Tel. (450) 437-5682 Tel. +49 81-65 77 0 Tel. +886-2-2910 3532 Fax (450) 437-8053 Fax +49 81-65 77 219 Fax +886-2-2910 3482 sales@us.kontron.com sales@de.kontron.com sales@tw.kontron.com www.kontron.com The latest version of this document may be found on our web site. Specifications subject to change without notice. Some products may not be available in all regions. Kontron and the Kontron logo are registered trademarks of Kontron Embedded Computers. All other trademarks are the property of their respective owners. Copyright 2001 by Kontron Embedded Computers. All rights reserved. T T S S R R Y Y E E S S C C T T E E M M CP302.0_10/2001 Rep.0_10/2001