R A dvanced TCA AT8404 AdvancedTCA 10GbE fabric carrier with 4 x Mid-Size AdvancedMC slots AdvancedTCA / AdvancedMC Open Modular Solutions PICMG 3.0, PICMG 3.1 option 9 Built for Maximum Design Versatility  compliant carrier board The Kontron AT8404 is one of three key open modular platform elements that complete Kontron’s 10 GbE product portfolio. As a PICMG 3.0/3.1-compliant Four (4) Mid-Size AMC slots that  AdvancedTCA carrier board, the AT8404 sets an industry precedent with 4 support AMC.0 rev 2, AMC.2, Mid-Size AMC slots that support a full range of AMC modules including — TDM AMC.3 interfaces (E1/T1, STM-1, OC3), NPUs, DSPs, PrAMCs and Storage AMCs. PCI-Express, SRIO, SAS/SATA or  AdvancedMC-Everywhere integration for customization 10GbE direct AMC interconnect The Kontron AT8404 provides equipment manufacturers the flexibility to 10GbE redundant Fabric  customize the design of their network system solutions, especially for various Interface 10 GbE-based systems that drive IMS-based broadband applications that require the seamless delivery of video and data content in IPTV or VoD Gigabit Ethernet switching  networks. Telco Clock for all AMC slots  Full Redundancy and High Availability Full Hot-Swap capabilities  Suitable for dual-star configurations in 14- and 16-slot systems, the AT8404 Management via SNMP, TELNET, is hot swappable, supports full redundancy, and provides PCI-Express, SRIO or  CLI, either In-band or Out of 10GbE direct AMC interconnects. For storage solutions, the AT8404 additio- band via 10/100Base-T Ethernet nally provides SAS/SATA direct AMC interconnects. With full IPMI 1.5 support, the AT8404 also implements the HPM.1 protocol to ensure field safe update or RS232 functionality of the IPMI Controller for field upgrades, rollbacks and watchdog IPMI version 1.5 support  functions. If it´s Embedded, it´s Kontron. AT8404 Technical Information Standards Compliance RTM Sites Ethernet This board is compatible to the following standards: - 3 TYCO/ERNI ZD-F-4-10-2-B-22 Connectors. - PICMG 3.0/3.1 option 9 - Support for 7 RTM lanes from each AMC - AMC.0 rev 2, AMC.2, AMC.3 - 10/100Base-T for management - PCI-Express, SRIO or 10GbE direct AMC interconnect - 12V and 3V3sus Supply Voltage connections - IPMI v1.5 - I²C support Building Blocks - JTAG and production I/O support - Ethernet Switch Services/Applications - Ethernet Switch Controller + Memory - NTP client for retrieving accurate time and date information - Synchronous Clock Distribution - Onboard event management - 4 x AMC sites - Test and trace facilities - RTM sites (Zone 3) - POST (power on self tests) diagnostics - IPMI - The system shall provide a standards based SNMP implementation - Power Supply Mezzanine incl. Holdup Circuit supporting SNMP v1, v2 and v3 for monitoring and management of Ethernet Switch Ethernet - Broadcom BCM56502 StrataXGS™ Gigabit Switch - IPMI version 1.5 for board management - 24x 1-GbE ports and 2x 10-GbE ports - IPMI based management of the AMC slots - 20 ports used for direct connections to each AMC ports 0 and 8 to 11 - Persistent storage of configuration across restarts - 2 ports to the RTM - Support for retrieving and installing multiple configurations - 2 ports to the base interface - Support for hot-plugging of the carrier board as well as AMCs - 2x 10GbE ports to FI Channel 1 and 2. - Two alternative firmware versions shall be stored allowing for roll- Ethernet Switch Controller and System Memory back after updates - Socketless AMCC PPC405GPr 400 MHz Ethernet/Bridging - 256 MBytes SDRAM 133 MHz; 128 MB Flash (supports multiple OS - Static link aggregation (IEEE 802.3ad) - Classic, rapid and multiple spanning tree algorithms shall be images); used for switch provisioning and diagnostics supported (IEEE 802.1D, IEEE 802.1w); VLAN tagging (IEEE 802.3ac) Synchronous Clock and PCI Express Clock Distribution - Quality Of Service on all ports (IEEE 802.1p) - Multi-service Line Card PLL - Full Duplex operation and flow control on all ports (IEEE 802.3x) - MLVDS Buffer - Auto negotiation of speeds and operational mode on all external GE - FPGA for clock distribution and control interfaces as well as on the base interfaces - PCI Express compliant clock source with optional Spread - Dynamic L2 multicast registration (GMRP) Spectrum Clock Interfaces to AMCs Environmental - 5 x GbE to AMCs distributed as follow: Operating Storage and Transit - Common region ports 0 from Ethernet switch -40 to +70°C / -10 to Temperature*: 0 °C to 55 °C - Fat pipe region port 8 to 11 from Ethernet switch 158°F* - Port 2 & 3 are direct connect to neighbor AMC, B1 to B3 & B2 to B4 15%-90% (non-conden- 15%-90% (non-conden- Humidity*: - Port 4 to 7 are direct connect to neighbor AMC, B1 to B2 & B3 to B4 sing) at 55°C (131°F) sing) at 55°C (131°F) - 7x channels from each AMC slot extended connector ports 13-15 and Altitude*: 4000 m (13,123 ft) 15,000m / 49,212 ft 17 – 20 to the RTM - AMC port 12 for Automatic Protection Switching (APS) across 3G/11 ms half sine Shock*: 18G/6 ms redundant Carriers (up to 2.5Gbps) 5 to 100Hz: 1G @ 0.25 Random 0.89Grms Vibration*: IPMI Octave/minute (5-200Hz) - HPM.1 protocol to ensure field safe update functionality of the IPMI *Meet or exceed Controller for field upgrades, rollbacks and watchdog functions Targeted MTBF is 150,000h @ 30°C, calculations based on Bellcore/ - PICMG 3.0 / IPMI 1.5 compliant Telcordia SR-332 Issue 1 AMC Sites Mechanical - 4 Slot carrier (8U x 280 mm x 30.48 mm) - B+ connectors (pressfit) - AMC.1 type 4E1S2 on B1/B2/B4 and type 4E1S1 on B3 - AMC.2 Type 4E1 on B1, B2, B3, B4 - Telecom clocks and/or PCI Express clock support Corporate Offices US/ Canada Asia Pacific Europe, Middle East & Africa 14118 Stowe Dr Far East Science Park, 2nd Floor No.2, Lane50, Oskar-von-Miller-Straße 1 85386 Eching/Munich - Germany Poway, CA 92064-7147 Nan Kang Road Section 3 Nan Kang District Taipei, Taiwan Tel.: +49 (0)8165 77 0 Tel.: (858) 677-0877 Tel: +886 2 2782 0201 Fax: (858) 677-0898 Fax: +886 2 2782 7486 Fax: +49 (0)8165 77 279 sales@us.kontron.com sales@kontron.com.tw sales@kontron.com www.kontron.com AT8404 - Doc V 1.1 - 2007 All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners.