Board weight

215 g

Board Weight

425 g

CE

EN55022, EN55024, EN61000-6-2/-6-3, EN300386, EN60950-1

CLK2

12x CLK2 inputs/outputs to/from AMCs, MLVDS

CLK3 (PCIe Fabric Clock)

12x CLK3 100 MHz FCLKA to AMCs. HCSL, PCIe GEN2 specified, SSC capable

Clock Distribution

Support for 12 AMCs, Serves one or two TCLKx Clock Signals to all AMCs, Receives TCLK Signals from selected AMCs, Front panel BITS clock Input (SMA), Provides SONET/SDH clocks to the backplane, Stratum 3 accuracy and holdover, Synchronous Ethernet support (optional), Cross Sync line between 2 MCHs for redundancy support

Clock Input

SMA connector. Supports multiple input frequencies: 1PPS, 10MHz, 8kHz, 2.048 MHz, 1.544MHz, 19.44MHz, 25Mhz

Cross-Over Channel

PCIe interlink, Specific MCH-MCH interlink for redundant applications

Dimensions

Single, Full-Size MCH module, 181.5 mm x 73.5 mm x 28.95 mm

Ethernet Switch

16x 1 GbE port Broadcom BCM56227 Ethernet switch: 12 ports connected to the Fabric [A], 1 port connected to the MCH update channel, 2 ports connected to the uplink ports on the front panel, 1 port routed to PPC Unit processor; 16K Layer2 Table, 2K Filter Processor memory, 1K Layer 2 Multicast Tables

GbE / 10 GbE switch

Broadcom BCM56820 24 Port 10GbE plus 4 Port 1GbE Multilayer Switch, 12x 1 GbE ports connected to Fabric [A], 12x 10 GbE ports connected to Fabric [DEFG] ]

GbE Uplink ports

2x 10/100/1000BASE-T on RJ-45 connector

Humidity

93% RH at 40°C, non-condensing

I2C

12x IPMB-L to AMC Modules, 2x IPMB-0 [A:B] redundant to Power Modules and Cooling Units, 1x IPMB-L inter-MCH, 1x I2C to carrier FRU

LEDs

12 Link LEDs (green) for each port on the Fabric[A], 1 Link LED (green) for the MCH update Channel, 3 LEDs (green) for clock synchronization status/control purpose, 2 LEDs (green) for Power Module status, 2 LEDs (green) for Cooling Unit status, 3 AMC management LEDs (Hot Swap, Out-of-Service, Health)

Management Port

1x 10/100/1000BASE-T on RJ-45 connector

MCMC

MCMC with redundancy support including active Carrier Manager election and re-discovery of active system, dual redundant protected firmware images with automatic rollback, Support for dual-redundant Power Modules, Support for dual-redundant MCH, Cooling Management, LED Controls, AMC Management, Radial IPMB-L, Support for 12 AMCs, AMC Payload Control, Electronic Keying, Power and Cooling Management, IPMI 1.5 compatibility with IPMI 2.0 extensions, MicroTCA compliance tested (Polaris)

Mechanics

Robust handle at the front panel for easy MCH extraction

Memory / Storage

512 MB DDR2 400 MHz with ECC, 64 MB NOR Flash for firmware, firmware configuration, FRU data 2x Firmware images for roll-over functionality, 1 GB NAND Flash, I²C EPROM for PPC405 configuration data

MicroTCA

based on PICMG MTCA.0 R1.0, Micro Telecommunications Computing Architecture R1.0

MTBF

min. 130,000h @ 40°C, calculations based on Telecordia SR-332 Issue 1

Power Consumption

typ. 22 W
typ. 53 W

Power Supply

12 V Payload Power, 3.3 V Management Power

RoHS

Directive 2002/95/E

Safety

Designed to meet: UL 60950, 3rd edition (US and Canada), EN 60950 (Europe), LVD 73/23/EEC (Europe), Denan Law (Japan Safety), UL 94V-0/1 with Oxygen index of 28% or greater material

Serial Port

Serial debug port with RS-232 signaling on 10-pin Hirose mini connector

Shelf Management Functions

Shelf manager implementation for local management of single MicroTCA chassis, Dedicated Command Line Interface (CLI), Sensor monitoring and alerting, Active monitoring of local and remote temperature, voltage and current sensors on the shelf FRUs, Access to raw and fully decoded sensor readings, Logging of all critical events reported by shelf FRUs, Capability to reset major/minor alarms with timeout, Control of remote alarm LEDs, IPMB-L real-time monitoring and capture support

Shelf Management Interface

Command Line Interface (CLI): CLI gives access to the Shelf Manager and the boards in the shelf, Access via Telnet, SSH or serial port, Access to shelf and board information via SNMP, Commands provide complete access to information such as the current state of the system, sensor values, events, health, fan speeds, FRU storage, etc., Optional machine readable CLI output

Shock (Operating)

3 [g] acceleration, 11 [ms] pulse duration

System Interconnect Tongue 1:Gigabit Ethernet

12x 1000BASE-BX (SerDes) on Fabric[A], 1x 1000BASE-BX (SerDes) on MCH update Channel

System Interconnect Tongue 2:CLK1

12x CLK1 inputs/outputs to/from AMCs, MLVDS

System Interconnect Tongue 3:10 GbE ports

6x 10 GbE on Fabric [DEFG] for AMCs 1-6, 1x 10GbE update channel to Fabric [DE]

System Interconnect Tongue 4:10 GbE ports

6x 10 GbE on Fabric [DEFG] for AMCs 7-12, 1x 10GbE update channel to Fabric [FG]

Temperature Range

Operational:-5 °C to +55 °C, Storage:-40 °C to +70 °C, no module heat sink, forced system airflow

Vibration (operating)

5 Hz to 200Hz 0.2G, 5mm/s (sinusoidal), 5 Hz to 100Hz: 0.1G @ 0.1 Octave/minute (sinusoidal), 5 Hz to 100Hz: 1G @0.1 Octave/minute (sinusoidal), 0,02 m²/s³ ASD, 5-10Hz +12dB/oct, 10-50Hz 0dB/oct, 50-100Hz -12dB/oct random)

Vibration/Shock

IEC60068-2-6 / IEC60068-2-27

WEEE

Directive 2002/96/EC