Altitude

Designed to meet the following requirements according to Belcore GR-63, section 4.1.3: Operating: -300 m to 4,000 m (13123 ft) (GR63 4.1.3), may require additional cooling above 1800m (5905ft); Non-Operating: -300 m to 14,000 m (45931.2 ft)

Electromagnetic Compatibility

Meets or exceeds the following specifications (assuming an adequate chassis): EMC Directive (Europe) 2004/10B/EC, EN55022 (Europe); EN55024 (Europe); CISPR22; VCCI (Voluntary Japan Electromagnetic Compatibility requirement), EN 300 386, Electro-Magnetic Compatibility (EMC) Requirements for Public Telecommunication Network Equipment;, Electromagnetic Compatibility (EMC) Requirements, FCC 47 CFR Part 15, (USA), Telcordia GR-1089

eUSB

Storage Single Port USB 2.0 interface (Optional)

Flash Memory

1Gb NOR Flash, Boot sector protection

Humidity

Designed to meet Bellcore GR63, Section 4.1; Operating: 5%-93% (non-condensing) at 40°C, Non-Operating: 5%-93% (non-condensing) at 40°C

I/O Interfaces

Front: 1 SFP+ cage to support multi-rate fiber SFP+ modules, Front: HIROSE for RS232 access to processor, AMC TCLKA and TCLKC support, AMC FCLKA input with 100Mhz, AMC Port 0 and Port 1: 1000Base-BX, AMC Ports: port 4-7 as PCIe x4 or SRIO and port 8-11 as PCIe x4, XAUI or 4x SGMII., AMC Port 15: RS232 (proprietary mapping)

IPMI

IPMI 2.0 compliant, Voltage and Temperature Sensors, ATCA LED control, FRU data storage for AMC, Firmware Update handling for field upgrades, rollbacks and watchdog functions

Mechanical Characteristics

4HP single Mid-size AMC Module (Full size on demand); Board is compliant with AMC.0 R2.0

Memory

1 to 8 Gigabyte DDR3 Memory support with ECC, Up to 1333 MHz ECC SO-DIMM

Multicore Processor Unit

10-Core Cavium OCTEON II CN6645 MIPS64 processor at 1.1 GHz, 6-Core Cavium OCTEON II CN6335 MIPS64 processor at 1.3 GHz

Operating Voltages

Management:3.3V +/-0.3V; Payload:10VDC to 14VDC

Operation Power

Management:TBD Wmax., TBD W typ.; Payload:TBD W max.,TBD W typ.

Safety

Low Voltage Directive 2006/95/EC, Complies with IEC/EN/CSA/ UL 60950-1. The board meets flammability requirements, as specified in Telcordia GR-63-CORE

Shock and Vibration

Designed to meet EN 300 019 and Telcore GR-63, Designed to meet NEBS Level 3, Earthquake Zone 4

Standards Compliance

This board is compatible to the following standards:AMC.0 R2.0 Advance Mezzanine Card Base Specification, AMC.1 R2.0 PCI Express and Advance Switching, AMC.2 R1.0 Ethernet Specification, AMC.4 R1.0 Serial RapidIO Specification, MTCA.0 R1.0 Micro Telecommunication Computing Architecture Base Specification, IPMI v2.0., RoHS compliant.

Temperature

Operates from -5°C to 55°C ambient air temperature with forced convection. Based on B.4. chassis. Operating @ 8.0 CFM: up to 25°C, Operating @ 11.4 CFM 26°C to 40°C, Operating @ 18.0 CFM 41°C to 55°C, Non-Operating: -40°C to 85°C