» AM4150 « High-End Processor AMC based on Freescale™ QorIQ™ P5 Technology » Outstanding Performance Freescale QorIQ™ Dual-Core P5020/64bit up to 2.2 GHz » Impressive Capacity Up to 8 GB ECC Memory DDR3 1300 MHz, up to 32 GB SATA NAND Flash Module » Comprehensive Connectivity Up to 5x GbE, 2x sRIO (1.3 and 2.1) x4 or 2x PCIe x4 SATA to Backplane and onboard Flash Module The pulse of innovation Kontron Datasheet AM4150 Control plane 64bit Dual Core QorIQ™ AMC module » High-performance processing » Longevity The AM4150 is a control plane CPU board implemented as Single Mid- The AM4150 meets highest demands regarding longevity due to the careful Size Advanced Mezzanine Card (AMC) for MicroTCA and ATCA applications. component selection and a Micro SDHC card socket to be not affected by The design is based on the Freescale™ QorIQ™ P5020 Dual Core processor, regular fl ash discontinuation. With up to 8 GbE DDR-3 ECC memory the with cores based on the 64bit e5500 Power Architecture®. Due to the AM4150 is well equipped for future demands. This QorIQ™ processor module P5020 processor, the AM4150 meets highest demands in multi-threaded is therefore suitable for telecommunication, military communications, as processing: in combination with high-speed fabrics and frame handlers, well as image processing in industrial and medical environments. The the multi-core architecture allows high throughputs, as well as low AM4150 supports different options of booting the OS, either from the Micro latencies. To match demands on high-performance, the AM4150 provides SDHC card, the NOR or the NAND Flash (for rugged applications). In terms a high-speed dual-channel memory with up to 8 GB ECC-RAM. In order to of operating systems, the AM4140 supports VxWorks 6.9, WindRiver Linux. grant reliability of the application, the AM4150 features redundant Boot Flashes. » MicroTCA Platforms Kontron also offers a choice of AMC systems for the AM4150. For instance » High-speed fabrics the OM6060 can be used as entry level platform for operating the AM4150 The Kontron AM4150 provides fl exible confi guration of high-speed fabrics. with point to point fabrics PCIe and SRIO in combination with the On AMC ports 4-7, 4x SERDES lines can be confi gured either as PCI Express AM4901 basic MCH which provides Ethernet connectivity to all AMC slots. (root complex or end point) or Serial Rapid IO (host or agent), primarily In this system, the AM4150 can be combined with I/O cards, DSP cards for applications which require close programming to the chip without and different processor boards. For higher demands, the OM6120 system extensive overhead and with minimum latencies. AMC ports 8-11may be provides multiple sRIO connections for up to 12 AMCs in combination with confi gured either for Serial Rapid IO or PCI Express or up to 3x GbE. In the AM4904–SRIO MCH. The system also allows switching PCIe fabrics in addition, the Kontron AM4150 supports three Gigabit Ethernet channels. combination with the AM4904-PCIE MCH. It can be operated with dual Either 2x GbE on AMC ports 0,1 plus 1x GbE at the front or 2xGbE at the MCHs. front and port 0 on the backplane. Depending on the application, the AM4150 supports usage in systems with MCH or without MCH in order to reduce costs and speed up system development. AM4150 SINGLE-WIDTH, MID-SIZE AMC MODULE Front Panel 2 banks of DDR3 SDRAM soldered AMC Connector 2 Banks of Soldered DDR3 SDRAM up to 8 GB w ECC with ECC Port No. RJ-45 MDI to Front with int. GbE Mag. Common Options Region DDR3 Dual RJ-45 Gigabit MDI SGMII 2x RGMII Gigabit 2x SerDes with int. Ethernet dTSEC GbE dTSEC 0,1 GbE A, GbE B Ethernet Mag. PHY PHY COP/ JTAG COP SATA SerDes 2 SATA A 3 SATA B Freescale™ User System SPD RTC EEP EEP EEP QorIQ™ (Opt.) Power Architecture® I²C SATA SATA Flash SerDes I²C Module Dual-Core P5020 Opt. RJ-45 RS-232 COM MicroSD Card NAND 64-bit Fat Pipe Region Socket Flash SerDes SerDes up to 2.2 GHz sRIO x4 or PCIe x4 4-7 SerDes SDHC SerDes 4x SerDes Local Bus MUX sRIO x4 or PCIe x4 eLBC SerDes 8-11 SerDes or max. 3x SGMII Front Panel LEDs DUART DUART RCW config. SPI SRDS PRTCL Extended Options Region FPGA 4x GPIO 16 Opt. 4x GPIO POST/User LEDs Board Control COM 15 COM Debug 14 Debug Temp. Sense Hot Swap LED SPI Boot SPI EEP FRU Flashes Out-of-Service LED Flash (standard/ for OS recovery) Health LED MMC Flash Hot Swap Handle Switch IPMB-L 2 www.kontron.com Kontron Datasheet Technical Information Form Factor Single width, mid-size module (full size on project request) CPU and PCH Freescale P5020/64bit @2.0GHz (2.2GHz depending on availability from Freescale) Memory 2x 2GB and 2x 4GB RAM with ECC standard 2x 2MB SPI NOR (for Bootloader, fallback confi guration) 1x 8MB NOR (for VxWorks) 1GB NAND Flash standard or not assembled, up to 2GB on project request MicroSD card socket Up to 64 GB SLC NAND Flash on a dedicated SATA NAND Flash module System Interconnection Port 0: 1xGbE Port 1: 1xGbE (routable to front plate, software selectable, default: port 1) Ports 4-7: sRIO x4 or PCIe x4 Ports 8-11: SRIO x4 or PCIe x4 or max. 3xSGMII(1GbE) Port 14: Debug Port15: COM2, 3.3V TTL FCLKA: bidirectional PCIe clock confi guration Power supply: 3.3V management power, 12V payload power 1x GbE Front Panel Interfaces 1x GbE (routable to Port 1, software selectable, default port 1) COM1, RS232 4x LEDs: control and status, bi-color (red/green LEDs) 3x LEDs: connected to MMC (healthy, hot swap, out of service) Miscellaneous Watchdog, timeout 125ms to 4096s in 16 steps RTC (not buffered) IPMI Software VxWorks BSP WindRiver Linux BSP Compliancy MicroTCA PICMG MTCA.0 Micro Telecommunications Comp. Architecture R1.0 PCI Express PCI Express Base Specifi cation Revision 2.0 Serial Rapid IO RapidIO Interconnect Specifi cation, Revision 2.1 AMC PICMG AMC.0: Advanced Mezzanine Card Specifi cation R2.0 PICMG AMC.1: PCI Express and Advanced Switching R1.0 PICMG AMC.2: Gigabit Ethernet R1.0 PICMG AMC.3: SATA PICMG AMC.4: Serial Rapid IO (1.3 and 2.1) IPMI IPMI Intelligent Platform Management Interface Spec. V2.0 Environmental Operating Temperature -5°C to +55ºC Acc. IEC60068-2-1/2 Humidity Operating 93% RH at 40°C, non condensing Acc. IEC60068-2-78 Vibration (sinusoidal) 5Hz to 150Hz, 1g Acc. to IEC 60068-2-6 Shock 15g / 11ms Acc. to IEC 60068-2-27 EMC Immunity: acc. to EN 55024 and 61000-6-2 Emission: acc. to EN 55022, class B and FCC47, part 15, subpart B Safety IEC 60950-1 3 3 w ww ww w.k .kont ontr ron.com on.com Kontron Datasheet Ordering Information Article Description AM4150-SA-2.0D-8-M-N1 P5020 64bit 2.0GHz dual core, 8GB RAM with ECC, 1GB NAND Flash AM4150-SA-2.0D-4-M-N1 P5020 64bit 2.0GHz dual core, 4GB RAM with ECC, 1GB NAND Flash VXW-BSP-AM4150-6.9.2 WindRiver VxWorks BSP Note: All AM4150 boards provide a microSD card socket. CORPORATE OFFICES Europe, Middle East & Africa North America Asia Pacifi c Lise-Meitner-Str. 3-5 14118 Stowe Drive 17 Building,Block #1, ABP. 86156 Augsburg Poway, CA 92064-7147 188 Southern West 4th Ring Road Germany USA Beijing 100070, P.R.China Tel.: + 49 (0) 821 4086-0 Tel.: + 1 888 294 4558 Tel.: + 86 10 63751188 ( ) Fax: + 49 0 821 4086 111 Fax: + 1 858 677 0898 Fax: + 86 10 83682438 sales@kontron.com info@us.kontron.com info@kontron.cn 4 www.kontron.com Datasheet – AM4150 #11272012WMH All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners.