Bus Interface

PICMG 2.0 Rev. 3.0 compliant 3.3 V/5.0 V compatible signaling/universal 64-bit/33 MHz system master interface Rear I/O version 32-bit/33 MHz J2 rear I/O: 2 serial ports, Ethernet, LEDs

Chipset Integrated

32 bit/33 MHz; 5V Signaling; Up to two expansion modules are stackable. 8 HP/12 HP version with one/two PMC slots or two/four PC*MIP slots.This port can also be used to add customized functionality.

Compliance

Temp. Ranges: 0 °C to +60 °C (standard) –40 °C to +85 °C (extended) –55 °C to +125 °C (storage) Relative Humidity: 0% to 95% (non-condensing) MTBF according to MIL-HDBK 217F CP 320: 170,400 h CP 320-IO1: 251,000 h Safety: EN 60950, IEC 950, UL 1950 EMI/EMC: EN 50081-1/EN 50082-2 Vibration: IEC 68-2-6, 10-300 Hz, 5 g Cont. Shock: IEC 68-2-29, 11 ms, 15 g Single Shock: IEC 68-2-27, 9 ms, 30 g Altitude: 50,000 ft. (15,240 m) Warrenty: 2 years Power Consumption: 7.5 W* /typ. +5 V 4.5 W* /typ. +3.3 V 2.8 W* /typ. +12 V 0 W* –12 V 0 W* * Without PCI Expansion Module and at 250 MHz, 64 MB SDRAM, 8 MB Flash Dimensions: 100 mm x160 mm (3U card size) Front Panel Hight: 128.5 mm Width: 20 mm (0.8 inch)/4 HP Weight: 200 g

Max Data Transfer Rate

SDRAM up to 128 MB direct soldered, 64 bit/100 MHz with ECC protection (8 bit parity) Flash up to 8 MB direct soldered (Boot Device and Program Storage) Two 32 pin DIP sockets (one optional 36 pin) for memory expansion: Flash DiskOnChip (up to 96 MB) Flash chip (512 kB) NV-SRAM (512 kB)/Cell Storage Life 10 years; 2 MB chip with 36 pin socket extension (Cell Storage Life 5 years) SRAM chip (512 kB) with battery backup option (GoldCap 5 days or replaceable battery up to 5 years) Two serial EEPROM’s (88 kByte) One EEPROM for board default settings One EEPROM for user settings

Max. Speed

A Universal Boot Loader supports the start of any operating system like WindRiver Vxworks.

Miscellaneous

Fast Ethernet Channel 10 Base-T/100 Base-TX; RJ-45; LAN Status LED’s (Activity, Link, Speed) Two serial ports 16550 compatible Dual UART; RJ-45 – RS232 – RS485 optical isolated (or 2nd RS232) Two push buttons RESET, ABORT (NMI) 3 Board Status LED’s (watchdog active, 2 general purpose)

MTBF

Coding switch (read back binary code from 0 to 15) Timers: Four 32-bit timers, one 16-bit timer, one watchdog timer (0,5/1/1,5/2 sec) RTC: Time keeper, counter for s/h/m/d/date/ month/years and century; backup via GoldCap (5 days) or optional via replaceable battery (20 years, if RTC only) Debug Port: JTAG/BDM; 16 Pin row connector

Processor

Integrated PowerPC microprocessor Motorola MPC8240 L1 cache 2x16 kB data/instruction cache; Internal processor core MPC603e Core Frequency 250 MHz (350 MHz planned) 6.6 SPECint95/250 MHz 5.5 SPECfp95/250 MHz 375 Dhrystone (2.1) MIPS/250 MHz PCI bridge and PCI arbiter Two channel controller DMA with chaining Programmable IRQ controller Multiple timers and counters Max. case temperature +105 °C