» » E ET TX X® ®- -C CN N8 8 « « Excellent 3D graphics performance » With VIA C7®/Eden® processor, VIA CN896 and VIA VT8237S » ETX 3.0 – Long Term Support » 2x Serial ATA 300 for highspeed drives » Up to 2 GB DDR2 SODIMM memory » Windows Vista® support If it’s embedded, it’s Kontron. ETX®-CN8 EtX®-CN8 Excellent 3D graphics performance The ETX®-CN8 module is based on the VIA C7® processor and They do not provide the PCI bus only, the ISA bus signals are VIA Eden® processor as well as on the VIA CN896 and VIA VT also available. A lot of existing ISA boards can still be used via 8237S chipset. It also takes advantage of the new ETX® 3.0 an ISA slot on a baseboard. This avoids expensive redesigns specification that allow for 2 Serial ATA 300 ports without and well proven ISA cards to PCI versions for standard PC violating the existing ETX® 2.8 pin usage. ETX®-CN8 modules motherboards. also will provide the following interfaces that are always PCI32, USB 2.0, Serial ATA 300, Parallel ATA, LVDS Multi-Media located in the same physical position on each board, thus ports as well as an ACPI (Advanced Configuration and Power guaranteering scalability between modules. Interface) for optimized power management. The JILI display For further expansions two IDE ports with Ultra66 DMA interface technology ensures automatic setting of the video capabilities are available. controller parameters for the attached LCD panel. technical information VIA C7® processor and VIA Eden® processor processor Chipset VIA CN896, VIA VT8237S Memory Up to 2 GB DDR2 (400/533/667) SODIMM memory Hard Disk 2x Serial ATA 300 (ETX 3.0 compliant); supports RAID 0,1 2x EIDE UDMA66 UsB 4x USB 2.0 (UHCI / EHCI) PCI 2.2, 32 bit / 33 MHz PCI bus pCi Ethernet VIA VT6103L 10/100 MBit Base-T-PHY sound VIA VT1618 AC 97 controller, Line In, Line Out, Mic in Video Controller VIA CN896 integrated; Internal UMA video, up to 64 MByte (opt. 128 MByte); VIA Uni (Chrome Pro™ HCDX9 IGP); Dual Independent Display Support LVDs and Crt resolution max. CRT WUXGA (1920x1440), max. LCD UXGA (1600x1200), (JILI3/EDID support ) serial ports 2 serial Com ports other features JIDA Support, IrDA1.1 enhanced, WakeOnLAN, Watchdog, I²C Bus, RTC, E²PROM BIOS Setup, LAN Boot, JRC support, Suspend states (S0/S3/S4/S5) operating systems WinXP, WinXPc, Win CE, Linux, Windows VISTA® form factor ETX® 3.0; 95 x 114 mm typical 9,3W @ 5V (VIA Eden® processor 500 MHz) power Consumption Operation: 0° to 60°C temperature (*) Storage: -30° to 85°C Humidity Operation: 10% to 90% Storage: 5% to 95% (non condensing) (*) Ask about wider temperature ranges ordering information Article Part-No. Description EtX®-CN8 18031-0000-05-2 With VIA Eden® processor 500MHz with CN896 18031-0000-15-0 With VIA C7® processor 1.5GHz with CN896 EtX®-CN8 18031-0000-99-0 HSP-ETX®-CD threaded stand off EtX®-CN8-Hsp 18031-0000-99-1 HSP-ETX®-CD through hole stand off EtX®-CN8-Hsp DDr2-soDiMM-512MB 97011-5120-XX-X DDR2 SODIMM memory module with 512MB DDr2-soDiMM-1GB 97011-1024-XX-X DDR2 SODIMM memory module with 1GB DRAM DDr2-soDiMM-2GB 97011-2048-XX-X DDR2 SODIMM memory module with 2GB DRAM CorporAtE offiCEs Europe, Middle East & Africa North America Asia pacific Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP. 85386 Eching/Munich Poway, CA 92064-7147 188 Southern West 4th Ring Road Germany USA Beijing 100070, P.R.China Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: + 86 10 63751188 Fax: +49 (0)8165/ 77 279 Fax: +1 858 677 0898 Fax: + 86 10 83682438 info@kontron.com info@us.kontron.com info@kontron.cn 2 www.kontron.com #ETX-CN8# 07142009PDL All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners.