ITOX G5G330-P-G
Specifications
System Chipset
Intel 915GM
Form Factor
ATX
6 layers, micro-ATX form factor. 24.4 cm (9.6") x 24.4 cm (9.6")
Ethernet Chipset
Realtek RTL8110S
Video Chipset
Intel 915GM
Audio
Realtek ALC655
BIOS
Award BIOS. 4Mbit flash memory
Board Type
Micro-ATX
Chipset
Intel 915GM chipset
Ethernet
RTL8110SB Gigabit ethernet controller. Supports 10Mbps, 100Mbps and 1Gbps data transmission
Expansion Slots
1 PCI Express x16 slot. 1 PCI Express x1 slot. 2 PCI slots
Processor
Intel Pentium M
Intel Pentium M Processor 533MHz/400MHz system data bus. Intel Celeron M Processor 400MHz system data bus
System Memory
Two 184-pin DDR SDRAM DIMM sockets. Supports single channel (64-bit wide) memory interface. Unbuffered PC2700 (DDR333) DDR SDRAM DIMM. Supports maximum of 2GB system memory using 256Mbit, 512Mbit or 1Gbit technology for x8 and x16 devices, non-ECC memory
Datasheet
Extracted Text
G5G330-P-G Intel® 915GM chipset Socket mPGA479M-based Intel® microATX board ® PROCESSOR (Socket mPGA479M-based Intel ) PCI EXPRESS BASED GRAPHICS INTERFACE • Intel® Pentium® M Processor • PCI Express architecture support for external graphics devices – 533MHz/400MHz system data bus • One 16-lane PCI Express port (x16 PCI Express port) intended for Graphics Attach • Intel® Celeron® M Processor • Fully compliant to the PCI Express Base Specification revision 1.0a – 400MHz system data bus • Base PCI Express frequency support of 2.5Gb/s only CHIPSET • PCI Express power management support • Intel® 915GM chipset ONBOARD AUDIO FEATURES – Intel® 915GM Graphics Memory Controller Hub (GMCH) • Realtek ALC655 – Intel® 82801FBM I/O Controller Hub (ICH6) • 18-bit stereo full-duplex codec with independent variable sampling rate SYSTEM MEMORY • High quality differential CD input • Two 184-pin DDR SDRAM DIMM sockets • True stereo line level outputs • Supports single channel (64-bit wide) memory interface • S/PDIF-in/out interface • Unbuffered PC2700 (DDR333) DDR SDRAM DIMM • 5.1-channel audio output • Supports maximum of 2GB system memory using 256Mbit, 512Mbit or 1Gbit ONBOARD LAN FEATURES technology for x8 and x16 devices, non-ECC memory • RTL8110SB Gigabit ethernet controller BIOS • Supports 10Mbps, 100Mbps and 1Gbps data transmission • Award BIOS • IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant • 4Mbit flash memory SERIAL ATA INTERFACE ENERGY EFFICIENT DESIGN • Supports two Serial ATA interfaces which are compliant with SATA 1.0 • Supports ACPI specification and OS Directed Power Management specification (1.5Gbps interface) • Supports ACPI STR (Suspend to RAM) function IDE INTERFACE • Wake-On-Events include: • Supports up to UltraDMA 100Mbps hard drive – Wake-On-Keyboard/Mouse • PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.) – Wake-On-USB Keyboard/Mouse – Wake-On-LAN and Wake-On-Ring IEEE 1394 INTERFACE – RTC timer to power-on the system • VIA VT6307 • System power management supported • Supports two 100/200/400 Mb/sec ports • CPU stopped clock control REAR PANEL I/O PORTS • Microsoft®/Intel® APM 1.2 compliant • 1 mini-DIN-6 PS/2 mouse port • Soft Power supported - ACPI v1.0a specification • 1 mini-DIN-6 PS/2 keyboard port • AC power failure recovery • 1 DB-25 parallel port DAMAGE FREE INTELLIGENCE • 1 DB-9 serial port • 1 DB-15 VGA port • Monitors CPU/system temperature and overheat alarm • Monitors CPU(V)/1.5V/3.3V/5V/12V/-12V/VBAT(V)/5VSB(V) • 1 RJ45 LAN port • 1 IEEE 1394 port voltages and failure alarm • 4 USB 2.0/1.1 ports • Monitors CPU/system/2nd fan speed and failure alarm • Mic-in, line-in and line-out • Read back capability that displays temperature, voltage, and fan speed • Watchdog timer function I/O CONNECTORS ONBOARD GRAPHICS FEATURES • 2 connectors for 4 additional external USB 2.0/1.1 ports • Integrated display interface • 3 connectors for 3 external serial ports • 1 connector for 1 external IEEE 1394 port – Analog CRT DAC interface support • 1 LCD brightness control connector – Supports max DAC frequency up to 400MHz – 24-bit RAMDAC support • 1 LVDS LCD panel connector • 1 LCD/inverter power connector – Up to 2048x1536 mode support • 1 LCD AUX power connector – Digital LVDS interface support • 1 front audio connector for line-out and mic-in jacks – Integrated dual channel LVDS interface support • 1 CD-in internal audio connector – Supports 25 to 112MHz single/dual channel LVDS interface • 1 S/PDIF-in/out connector – Single channel LVDS interface support: 1 x 18 bpp • 1 connector for IrDA interface – Dual channel LVDS interface support: 2 x 18 bpp • 2 Serial ATA connectors • Internal graphics features – DVMT 3.0 support • 1 40-pin IDE connector • 1 floppy connector – 1MB or 8MB of pre-allocated memory supported • 1 20-pin ATX power connector – Intel® Dual-Frequency Graphics Technology – Intel® Smart 2D Display Technology • 1 front panel connector • 1 chassis open connector – Dual Independent display pipes • 3 fan connectors – 32-bit hardware cursor supported – 2D graphics engine EXPANSION SLOTS – Optimized 256-bit BLT engine • 1 PCI Express x16 slot – 32-bit Alpha blended cursor • 1 PCI Express x1 slot – High quality 3D setup and render engine • 2 PCI slots – Triangle lists, strips and fans COMPATIBILITY – Supports D3D and OGL pixelization rules • PCI 2.2 and AC ´97 compliant – Shadow maps PCB – Zone rendering 2.0 support – High quality texture engine • 6 layers, micro-ATX form factor – 533 MegaTexel/sec performance - 266 Mpixel/sec fill rate up to 2 bilinear • 24.4 cm (9.6") x 24.4 cm (9.6") textures SAFETY – Per-pixel perspective corrected texture mapping • UL, cUL, FCC, CE – 3D graphics rendering enhancements – 16- and 24-bit Z buffering – Maximum 3D resolution supported: 1600x1200x32 ITOX is a registered trademark of ITOX, LLC. All other product names mentioned are trademarks or registered trademarks of thei r respective companies. All specications are subject to change without prior notice. © 2006 ITOX, LLC MA-SD-134-0806
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the G5G330-P-G?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods