G5G100-P-G Intel® 915GM chipset Socket mPGA479M-based Intel® Mini-ITX board -- High quality texture engine PROCESSOR (Socket mPGA479M-based Intel®) - 533MegaTexel/sec performance ® ® • Intel Pentium M Processor - 266 Mpixel/sec fill rate up to 2 bilinear textures – 533MHz/400MHz system data bus - Per-pixel perspective corrected texture mapping ® ® • Intel Celeron M Processor -- 3D graphics rendering enhancement – 400MHz system data bus - 16- and 24-bit Z buffering CHIPSET - Maximum 3D resolution supported: 1600 x 1200 x 32 ® • Intel 915GM chipset ONBOARD AUDIO FEATURES ® – Intel 915GM Graphics Memory Controller Hub (GMCH) • Realtek ALC655 ® – Intel 82801FBM I/O Controller Hub (ICH6M) • 16-bit stereo full-duplex codec with independent variable sampling rate SYSTEM MEMORY • High quality differential CD input • Two 184-pin DDR SDRAM DIMM sockets • True stereo line level outputs • Supports single channel (64-pit wide) memory interface • S/PDIF-in/out interface • PC2700 (DDR333) DDR SDRAM DIMM • 5.1-channel audio output • Supports maximum of 2GB system memory using 256Mbit, 512Mbit, or ONBOARD LAN FEATURES 1Gbit Technology for x8 and x16 devices, non ECC memory • RTL8110SC Gigabit Ethernet controller BIOS • Supports 10Mbps, 100Mbps, and 1Gps data transmission • Award BIOS • IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant • 4Mbit flash memory SERIAL ATA INTERFACE ENERGY EFFICIENT DESIGN • Supports two Serial ATA interfaces; compliant with SATA 1.0 • Supports ACPI specification and OS Directed Power Management specification (1.5Gbps interface) • Supports ACPI STR (Suspend to RAM) function IDE INTERFACE • Wake-On-Events include: • Supports up to UltraDMA 100Mbps hard drives – Wake-On-PS/2 Keyboard/Mouse • PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec) – Wake-On-USB Keyboard REAR PANEL I/O PORTS – Wake-On-LAN • 4 USB 2.0/1.1 ports – Wake-On-Ring • 1 RJ45 LAN port – RTC timer to power-on the system • 3 DB-9 serial ports • System power management supported • 1 DB-15 VGA port • CPU stopped clock control • 1 mini-DIN-6 PS/2 mouse port • Microsoft®/Intel® APM 1.2 compliant • 1 mini-DIN-6 PS/2 keyboard port • Soft Power supported - ACPI v1.0b specification • 3 audio jacks: line-out, line-in and mic-in • AC power failure recovery I/O CONNECTORS DAMAGE FREE INTELLIGENCE • 2 connectors for 4 additional external USB 2.0/1.1 ports • Monitors CPU/system temperature and overheat alarm • 1 connector for 1 external serial port • Monitors CPU(V)/1.5V/3.3V/5V/12V/-12V/VBAT(V)/5VSB(V) voltages and • 1 connector for LCD brightness control failure alarm • 1 connector for LVDS LCD panel nd • Monitors CPU/chassis/2 fan speed and failure alarm • 1 connector for LCD AUX power • Read back capability that displays temperature, voltage, and fan speed • 1 connector for LCD/inverter power • Watchdog timer function • 1 DIO connector ONBOARD GRAPHICS FEATURES • 1 front audio connector for line-out and mic-in jacks • Integrated display interface • 1 CD-in internal audio connector – Analog CRT DAC interface support • 1 S/PDIF-in/out connector - Supports max DAC frequency up to 400MHz • 1 connector for IrDA interface - 24-bit RAMDAC support • 2 Serial ATA connectors - Up to 2048x1536 mode support • 1 40-pin IDE 1 connector – Digital LVDS interface support • 1 floppy connector (FPC connector type) - Integrated dual channel LVDS interface support • 1 20-pin ATX power connector - Supports 25 to 112MHz single/dual channel LVDS interface • 1 chassis open connector - Single channel LVDS interface support: 1 x 18 bpp • 1 front panel connector - Dual channel LVDS interface support: 2 x 18 bpp • 3 fan connectors • Internal graphics features CABLES – DVMT 3.0 support • 1 IDE cable - 1MB or 8MB of pre-allocated memory supported • 1 SATA cable – Intel® Dual-Frequency Graphics Technology • 1 SATA power cable -- Intel® Smart 2D Display Technology EXPANSION SLOTS – Dual Independent display pipes -- 32-bit hardware cursor supported • 1 PCI slot for PCI expansion card or Riser Card for 1, 2, or 3 PCI slots -- 2D graphics engine (for low profile PCI card only) - Optimized 256-bit BLT engine COMPATIBILITY - 32-bit Alpha blended cursor • PCI 2.2 and AC ’97 compliant -- High quality 3D setup and render engine CIRCUIT BOARD (PCB) - Triangle lists, strips, and fans • 6 layers, Mini-ITX form factor - Supports D3D and OGL pixelization rules • 17 cm (6.7") x 17 cm (6.7") - Shadow maps SAFETY - Zone rendering 2.0 support • UL, cUL, FCC Class B, CE ITOX is a registered trademark of ITOX, LLC. All other product names mentioned are trademarks or registered trademarks of their respective companies. All specifications are subject to change without prior notice. © 2007 ITOX, LLC MA-SD-150-0707