ITOX G4S601-B-G
Specifications
Form Factor
ATX
Ethernet Chipset
Realtek RTL8101L
System Chipset
Intel 865G
Video Chipset
Intel 865G
Audio
Realtek Audio Codec
Bios
AWard Bios
Board Type
ATX
Chipset
Intel 865G
LAN
Realtek RTL8101L fast ethernet controller
Memory
Supports up to 2GB system memory.
Processor
Intel Pentium 4
Intel Pentium 4 / Intel Celeron
Features
- Intel 865G Chipset
- On-board Video
- Realtek RTL8101L fast Ethernet controller
Datasheet
Extracted Text
G4S601-B-G Intel® 865G chipset Socket 478-based Intel® ATX motherboard PROCESSOR (Socket 478-based Intel®) ONBOARD AUDIO FEATURES ® ® • Intel Pentium 4 Processor with Hyper-Threading Technology • Realtek audio CODEC – 800MHz/533MHz system data bus • 16-bit stereo full-duplex codec with 48KHz sampling rate ® ® • Intel Pentium 4 processor • High quality differential CD input – 533MHz400MHz system data bus • True stereo line level outputs ® ® • Intel Celeron processor • S/PDIF-out interface – 400MHz system data bus • 6-channel audio output CHIPSET ONBOARD LAN FEATURES • Intel® 865G chipset • Uses Realtek RTL8101L fast ethernet controller – Intel® 865G Chipset Graphics Memory Controller Hub (GMCH) • 32-bit PCI master interface – Intel® 82801EB I/O Controller Hub (ICH5) • Integrated power management functions • Full duplex support at both 10 and 100 Mbps SYSTEM Memory • Supports IEEE 802.3u auto-negotiation • Two 184-pin DDR DIMM Sockets • Supports wire for management • Supports dual channel (128-bit wide) memory interface IDE INTERFACE – Each channel supports 2 DIMM sockets • Supports up to 2GB system memory • Supports up to UltraDMA 100Mbps hard drives • Synchronous operation with processor system bus • PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.) – PC2700/PC3200 (DDR333/DDR400) with 800MHz FSB CPU SATA IDE INTERFACE DDR333 will run at 320MHz memory frequency when used with 800MHz FSB • Supports two SATA (Serial ATA) interfaces which are compliant with CPU SATA 1.0 specification (1.5Gbps interface) – PC2100/PC2700 (DDR266/DDR333) with 533MHz FSB CPU ACCELERATED GRAPHICS PORT (A.G.P) – PC2100 (DDR266) with 400MHz FSB CPU • Supports AGP 3.0 and AGP 2.0 spec • Supports non-ECC (x64) DIMM using 128Mb, 256Mb, or 512Mb • AGP 8x data rate provides a theoretical maximum bandwidth of 2.13GB/sec. • Supports unbuffered DIMMs • Supports 1.5V AGP 4X with up to 1066MB/sec. bandwidth for 3D graphics BIOS applications (3.3V AGP card is NOT supported) • Award BIOS • Supports AGP 3.0 and AGP 2.0 spec. • 4Mbit flash memory • Supports AGP or ADD card ENERGY EFFICIENT DESIGN REAR PANEL I/O PORTS • Supports ACPI specification and OS Directed Power Management • 4 USB 2.0/1.1 ports • Supports ACPI STR (Suspend to RAM) function • 1 RJ45 LAN port • Wake-On-Events include: • 1 DB-9 serial port – Wake-On-PS/2 Keyboard/Mouse • 1 DB-15 VGA port – Wake-On-USB Keyboard • 1 DB-25 parallel port – Wake-On-Ring (external modem) • 1 mini-DIN-6 PS/2 mouse port – Wake-On-LAN • 1 mini-DIN-6 PS/2 keyboard port – RTC timer to power-on the system • 3 audio jacks: line-out, line-in and mic-in • System power management supported I/O CONNECTORS • CPU stopped clock control • 2 connectors for 4 additional external USB 2.0/1.1 ports • Microsoft®/Intel® APM 1.2 compliant • 1 connector for 1 external serial port • Soft Power supported - ACPI v1.0a specification • 1 connector for 1 external game/MIDI port • AC power failure recovery • 1 connector for external line-out and mic-in jacks • Auto power-on function • 1 CD-in internal audio connector • Watchdog timer function • 1 surround connector ONBOARD GRAPHICS FEATURES • 1 S/PDIF-out connector • Graphics Memory • 1 connector for IrDA interface – Shares 1MB/4MB/8MB/16MB/32MB of the system memory in DOS mode • 2 Serial ATA connectors – Uses Dynamic Video Memory Technology (DVMT) in Windows mode • 2 IDE connectors • Graphics controller • 1 floppy connector – Core frequency of 266MHz • 1 20- pin ATX power connector – 350MHz integrated 24-bit RAMDAC • 1 4-pin 12V ATX power connector – Analog display up to 2048x1536 @ 60Hz refresh • 1 Wake-On-Lan connector – 3D setup and render engine - Discrete, Triangles, Strips and fans • 3 fan connectors for CPU fan, chassis fan and 2nd fan – Per pixel perspective corrected texture mapping CABLES – Software DVD at 30fps, full screen • 1 SATA cable • 2D graphics features • 2 IDE cables – Optimized 256-bit BLT engine • 1 FDD cable – 32-bit alpha blended cursor – Programmable 3-color transparent cursor EXPANSION SLOTS • 3D graphics features • 1 AGP 8x/4x slot – 200 megapixels/sec fill rate • 6 PCI slots – Maximum 3D resolution: 1600x1200x32 @ 85Hz COMPATIBILITY – Flat and Gouraud shading • PCI 2.2 and AC ’97 compliant – 16- and 24-bit Z-buffering and 16- and 24-bit W-buffering ® • Intel AGP version 3.0 – Vertex and programmable pixel fogging and atmospheric effects PCB – Double and triple render buffer • 4 layers, ATX form factor • Software drivers ® • 30.5cm (12") x 22cm (8.66") – Windows 98SE/2000/ME/XP ® – Windows NT 4.0 SAFETY • UL, cUL, FCC Class B, CE ITOX is a registered trademark of ITOX, LLC. All other product names mentioned are trademarks or registered trademarks of their respective companies. All specifications are subject to change without prior notice. © 2006 ITOX, LLC MA-SD-137-0906
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the G4S601-B-G?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods