ITOX COM630-B0
Specifications
AUDIO FEATURES
Realtek ALC655 AC97 audio codec. 6-channel audio output. 2W amplifier for speaker-out.
BIOS FEATURES
FWH /LPC interface. Supports up to 4Mbit flash ROM. PLCC32 socket. Supports WP# jumper. Carrier board ROM enable/disable function supported.
COM EXPRESS CONNECTORS
Two 220-pin COM Express standard connectors. Module connector pin: Tyco 3-631849-6.
DAMAGE FREE INTELLIGENCE
Monitors system temperature and overheat alarm. Monitors system fan speed and failure alarm.
EXPANSION SLOTS
1 CompactFlash socket. 1 PCI Express x16 (Graphics or Dual SDVO). 2 PCI Express x1. 4 PCI slots (PCI 2.3, 32-bit, 33MHz).
HUMIDITY
Operating: 10% to 90%.
I/O CONNECTORS
2 connectors for 4 additional external USB 2.0/1.1 ports. 1 connector for an external serial port. 1 LCD brightness control connector. 1 LVDS LCD panel connector. 1 LCD/inverter power connector. 1 Digital I/O connector. 1 Digital I/O power connector. 1 front audio connector for line-out and mic-in jacks. 1 CD-in internal audio connector. 1 S/PDIF-in/out connector. 1 speaker out connector. 1 connector for IrDA interface. 4 Serial ATA connectors. 1 40-pin IDE connector. 1 FDD connector. 1 parallel connector (optional). 1 24-pin ATX power connector. 1 4-pin 12V power connector. 1 Wake-On-Ring connector. 1 front panel connector. 3 fan connectors. 1 diagnostic LED (optional).
I/O CHIP 1 FEATURES
Winbond 83627HG-AW controller. LPC interface. Supports Smart fan. Default I/O port address "2eh".
I/O CHIP 2 FEATURES
Fintek F81216D controller. LPC interface. Supports 4 COM ports. Supports IrDA. Watchdog timer function. Default I/O port address "4eh".
IDE FEATURES
Supports up to Ultra ATA 100. One IDE channel supports up to 2 IDE devices.
PCB
4 layers, ATX form factor. 30.5cm (12") x 24.4cm (9.6").
REAR PANEL I/O PORTS
1 mini-DIN-6 PS/2 mouse port. 1 mini-DIN -6 PS/2 keyboard port. 3 DB-9 serial ports. 1 DB-15 VGA port. 1 RJ45 LAN port. 4 USB 2.0/1.1 ports. Mic-in, line-in and line-out.
REGULATORY
EMC: EN55022, EN61000-3-2, EN61000-3-3, EN55024, FCC Part 15 Class B
SAFETY
UL, cUL, FCC Class B, CE.
SERIAL ATA FEATURES
SATA speed up to 3Gb/s. Four L-type connectors.
TEMPERATURE
Operating: 0oC to 60oC. Non-operating: -40oC to 85oC
VIBRATION
Amplitude: 1.5mm. Frequency: 5-55-5Hz. Time: 360 min per 72 cyle in each 3 axes.
Datasheet
Extracted Text
COM630-B0 Carrier Board AUDIO FEATURES REAR PANEL I/O PORTS • Realtek ALC655 AC97 audio codec • 1 mini-DIN-6 PS/2 mouse port • 6-channel audio output • 1 mini-DIN-6 PS/2 keyboard port • 2W amplifier for speaker-out • 3 DB-9 serial ports • 1 DB-15 VGA port SERIAL ATA FEATURES • 1 RJ45 LAN port • SATA speed up to 3Gb/s • 4 USB 2.0/1.1 ports • Four L-type connectors • Mic-in, line-in and line-out IDE FEATURES I/O CONNECTORS • Supports up to Ultra ATA 100 • 2 connectors for 4 additional external USB 2.0/1.1 ports • One IDE channel supports up to 2 IDE devices • 1 connector for an external serial port • 1 LCD brightness control connector BIOS FEATURES • 1 LVDS LCD panel connector • FWH/LPC interface • 1 LCD/inverter power connector • Supports up to 4Mbit flash ROM • 1 Digital I/O connector • PLCC32 socket • 1 Digital I/O power connector • Supports WP# jumper • 1 front audio connector for line-out and mic-in jacks • Carrier board ROM enable/disable function supported • 1 CD-in internal audio connector • 1 S/PDIF-in/out connector I/O CHIP 1 FEATURES • 1 speaker out connector • Winbond 83627HG-AW controller • 1 connector for IrDA interface • LPC interface • 4 Serial ATA connectors • Supports Smart fan • 1 40-pin IDE connector • Default I/O port address "2eh" • 1 FDD connector • 1 parallel connector (optional) I/O CHIP 2 2 F2 EATURES 2 2 • 1 24-pin ATX power connector • Fintek F81216D controller • 1 4-pin 12V power connector • LPC interface • 1 Wake-On-Ring connector • Supports 4 COM ports • 1 front panel connector • Supports IrDA • 3 fan connectors • Watchdog timer function • 1 diagnostic LED (optional) • Default I/O port address "4eh" EXPANSION SLOTS DAMAGE FREE INTELLIGENCE • 1 CompactFlash socket • Monitors system temperature and overheat alarm • 1 PCI Express x16 (Graphics or Dual SDVO) • Monitors system fan speed and failure alarm • 2 PCI Express x1 • 4 PCI slots (PCI 2.3, 32-bit, 33MHz) TEMPERATURE o o • Operating: 0 C to 60 C COM EXPRESS CONNECTORS o o • Non-operating: -40 C to 85 C • Two 220-pin COM Express standard connectors • Module connector pin: Tyco 3-631849-6 HUMIDITY • Operating: 10% to 90% PCB VIBRATION • 4 layers, ATX form factor • 30.5cm (12") x 24.4cm (9.6") • Amplitude: 1.5mm • Frequency: 5-55-5Hz • Time: 360 min per 72 cyle in each 3 axes SAFETY • UL, cUL, FCC Class B, CE REGULATORY • EMC: EN55022, EN61000-3-2, EN61000-3-3, EN55024, FCC Part 15 Class B REAR PANEL I/O PORTS PS/2 COM 2 COM 4 LAN Mouse Mic-in USB 3 Line-in Line-out PS/2 COM 1 VGA USB 0-1 USB 2 K/B All product names mentioned are trademarks or registered trademarks of their respective companies. All specifications are subject to change without prior notice. September 3, 2007 ITOX, LLC.COM
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the COM630-B0?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods