VMM ROTARY VALVE ACTUATORS PRODUCT DATA Features • Protected against overload and blocking • Maintenance-free electrical actuator for rotary valves • Clear position indicator • Direct mounting on rotary valves • Manual operation • High torque • Large wiring cabinet • Long lifetime Specifications Power supply 230 Vac / 24 Vac; 50 Hz Depending on type Power consumption 3.5 VA Control signal 230 Vac / 24 Vac, floating. Depending on type (see table) Run time Depending on type (see table) Application Nominal torque 10 Nm / 20 Nm / 30 Nm / 40 Nm. Depending on type (see table) The Honeywell VMM actuator is designed to provide floating control in Greenhouse heating and air conditioning systems. Angle of rotation 90° High control performance and a robust design are standard for this actuator. In combination with the valve DR-ZR serie, it Protection standard IP 54 per EN60529 is possible to control very exact heating and cooling water Insulation class Il per EN60730 temperatures. The mechanical interface between actuator and valve is designed for reliable operation. Actuators with Ambient temperature torques from 20 Nm up to 40 Nm are available for a wide for operation 0 to 60 °C range of rotary mixing valves (DIN 15 up to DIN 150). Water temperatures in the valve 2 to 130 °C Relative humunity noncondensing Weight 1.5 kg EN0B-075 NL01R0102 VMM Specification per actuator Operation The actuator is powered by a synchronous motor. The Order Number Order number spindle of the actuator rotates 90°. In the end positions the Torque Actuator Actuator Run Time motor is switched off by endswitches. [NM] 24Vac floating 230Vac floating [min/90°] Manual operation declutches the gear from the valve. As 20 VMM20-24 VMM20 1.6 soon the actuator is powered, the valve is driven by the actuator again. 30 VMM30-24 VMM30 2.3 There is no adjustment necessary. The actuator is 40 VMM40-24 VMM40 3.5 maintenance-free. Suitable valves DR; ZR Mounting on the valve Before mounting the actuator, position the rotary valve according to its installation instruction. Disconnect the power from the controller before opening the actuator. EN0B-075 2 VMM Dimensions (mm) Dimensions with DR..G.LA (mm) Type DN a c SW h i DR15 GMLA 15 110 179 41 55 R ½ in. DR20 GMLA 20 110 179 46 55 R ¾ in. DR25 GMLA 25 115 179 50 58 R 1 in. DR32 GMLA 32 140 188 60 70 R 1 ¼ in. DR40 GMLA 40 150 188 65 75 R 1 ½ in. 3 EN0B-075 VMM Dimensions with DR.. GFLA DR.. FA (mm) Type DN a b c d e f g h DR 20 GFLA 20 140 15 179 65 90 50 4x11 70 DR 25 GFLA 25 150 15 179 75 100 60 4x11 75 DR 32 GFLA 32 160 17 188 90 120 70 4x14 80 DR 40 GFLA 40 170 16 188 100 130 80 4x14 85 DR 50 GFLA 50 190 16 202 110 140 90 4x14 95 DR 65 GFLA 65 210 16 219 130 160 110 4x14 105 DR 80 GFLA 80 250 18 219 150 190 128 4x18 125 DR 100 GFLA 100 270 18 240 170 210 148 4x18 135 DR 125 GFLA 125 310 20 267 200 240 178 8x18 155 DR 150 GFLA 150 330 20 274 225 265 202 8x18 165 DR200GFLA 200 390 22 314 280 320 258 8x18 195 Home and Building Control Products Helping You Control Your World Honeywell AG Böblinger Straße 17 D-71101 Schönaich Phone (49-7031) 637-01 Fax (49-7031) 637-493 DIN EN Subject to change without notice. Printed in Germany. Manufacturing location is certified to ISO 9001 EN0B-075