® STAR II STAR II Controller with MIRO Options Advanced Technology Controller proximity, magnetic stripe, keypad, biometric, smartcard and Honeywell STAR II Controller redefines access control technology third party (Wiegand) reader access control technologies allows by offering the latest innovative controller that utilizes surface- for easy integration of custom applications at each door. Each mount technology. The STAR II controller incorporates this state- unit can monitor 255 inputs and control 96 relay outputs using of-the-art enhanced digital technology which provides more additional MIROs. A WIRO 4/8/4 Wiegand reader and I/O powerful features, all on one small single board. Easy installation, module allows facilities with more than two third-party Wiegand modular components, and an affordable price makes STAR II readers to upgrade to Honeywell’s advanced technology. They Controller the right solution for managing even the most also allow a site to keep the current wiring and reader / card ® demanding access control applications. With a 32-bit Intel relationships along with adding 8 additional monitor inputs and microprocessor built-in, the controller provides fast and accurate 4 relay outputs. An on-board plug-in port is included for optional control of up to sixteen doors. Each STAR II controller comes with 10baseT Ethernet CoBox Micro interface. NSMLite, a Graphical User Interface software (GUI) that is used to Easy Installation configure the controller, doors, points, cardholders and elevator Installation time and cost have been greatly reduced with the configurations. Other advanced features include: scalable door advanced technology offered in the STAR controller. Switchable architecture, card capacity for up to 100,000 cardholders; selectable baud rates and addressing can now be done directly independent PIN entry for each card holder; assignable door lock on the panel rather than through a laptop or terminal. In relays, 16 on-board monitor inputs / 4 relay outputs (MIRO), built- addition, twisted-pair wiring (RS-485 data) greatly reduces the in battery charging circuit for low power installs, on-board support cost and difficulty of installing an access control system and for 2-Wiegand readers without additional physical interface, allows up to a 4,000 foot distance between Host and STAR II elevator control and optional Ethernet interface. Controller. It also provides the same distance between a Personality Chip For Easy Upgrades Controller, MIROs, WIUs and readers. Common power supplies STAR II Controller modular architecture allows flexible system and batteries can take advantage of the controllers built-in design options for tailoring secure and dependable access charging circuitry for low power installations. While providing an control solutions for any facility, regardless of size. Base two- advanced access control solution, STAR controller is also door system can be field upgraded to a 16-door unit with a economically priced so any organization can implement an simple personality chip change. Add readers or other advanced advanced multiple technology system at a cost similar to less features when you want and when you need it. Support for secure single technology systems. FEATURES  Fully integrated access control system  On-board integrated MIRO 16/4  2 Wiegand ports on-board; can be  Base two-door system can be field  Can monitor 255 inputs and control 96 expanded by additional Wiegand upgraded to a 16-door unit with a outputs with additional MIROs external board simple personality chip change  Modular MIRO options for easy  Host Communications  Advanced digital technology with customization and expansion: - RS-232 ® embedded Intel 32-bit - MIRO 32/0, 2/16, 4/2, - RS-485 microprocessor provides fastest - WIRO 4/8/4 - Dial-up response time in the industry  Switch selectable Baud rate and - Optional Ethernet LAN module  Support for multiple access technologies: address for ease of installation  NexSentry Manager Lite - Digital proximity  Elevator control - Magnetic Stripe  Cardholder capacity: 100,000 - Smart Card  S-NET dual twisted-pair wire installation - Keypad - Biometrics ® STAR II STAR II Controller with MIRO Options CONTROLLER SPECIFICATIONS BENEFITS Database: Dimensions:  Modular architecture allow for easy upgrade to future technologies Scalable architecture through  Board: 15" H x 5" W x 1.25" D personality chip: (38.1cm H x 12.7cm W x 3.2 cm D)  Advanced digital technology with ®  2, 4, 8, & 16-door units, all use base  Enclosure: 16.75" H x 5.63" W x 1.88" D embedded Intel 32-bit microprocessor platform with only a personality chip (42.6cm H x 14.3cm W x 4.8cm D) provides fast response times change to increase door capacity Environment:  Independent PIN codes  Cardholders: 100,000  Temperature: -7° to 49° C / 20° to 120° F  Hard/soft anti-passback with  Flash programming for firmware  Humidity: 0 to 95% non-condensing “forgiveness” revision updates Power:  Normal and reverse lock operation  Access codes:120  User defined holidays: 30  On-board output charging circuit for  Log Printer interface  Time codes:128 12 V, 12 Amp hour, lead acid gel cell  Built-in battery charger for low  Actions: 64 batteries powered systems  Authorization levels: 6  Board only input: 16-28 VDC (16-20 VAC)  Easy installation  Individual operator IDs: 8 for board operation without charging  Transaction buffer:  Personality chip for easy upgrades  Input for battery charging circuit: - 5,000 maximum in security 20-28 VDC (16-20 VAC), 1A management system port (max. charging) - 100 circular in Terminal port  Backup battery operating range:  Elevator: 96 floors 10.5-14 VDC  Consumption: less that 5 watts Monitor Inputs and Relay Outputs: Wiring:  On-board MIRO with16 four state monitor inputs & 4 form C, relay outputs  Dual twisted pair (shielded  MIRO expansion: up to 15 units per communication) controller, with max. support for 255  Wiegand interface: monitor inputs and 96 relay outputs - supports 2 physical Wiegand  Relay outputs: zone mode, alarm, connections through 3 pair latched alarm, and locks (shielded communication)  Connection of 4 Wiegand units Interface and Communication through WIU using S-Net Specifications:  2, 4, 8, or all 16 doors may be  Security Management System Wiegand communication: RS-485 or RS-232  S-NET data channel up to 4,000' - Optional host communication  Mounting: board-only or with optional provided with addition of enclosures on-board Ethernet adapter  Security Management System:  Terminal Interface: - 9-pin D-sub DTE - ASCII through separate RS-232 - RS-485 Host: Phoenix type terminal port - RJ-45 with optional Ethernet - Switch selectable baud rate and interface address for ease of installation  Terminal port: 9-pin, D-sub DTE (there is no longer a need for a  S-NET Communications: 4 Phoenix terminal or laptop in order to type, first 2 S-Net ports double as connect to the host) Wiegand interface  Log printing through terminal port  Power & input battery: Phoenix type  Microprocessor: Intel 32-bit industrial Diagnostics: microprocessor  Self-protection: power input failures,  LED status lights: controller tampering - Operational status of the controller  Direct to reader Wiegand interface: - Relay output status 2 readers directly to controller - Comm. TX/RX traffic through  S-NET to Honeywell Integrated Security host, serial terminal, S-Net and readers and controller peripherals operational Ethernet interface  Dial-up communication  Internal Diagnostics/System  NSMLite Configuration through terminal port www.honeywellaccess.com 2 MIRO OPTIONS AND SPECIFICATIONS WIRO 4/8/4 MIRO 32/0 MIRO 2/16 MIRO 4/2 Relay Outputs 4 Form C Relays None 16 Form C Relays 2 Form C Relays Monitor Inputs 8 four-state monitor inputs 32 four-state monitor points 2 four-state monitor inputs 4 four-state monitor points Board Dimensions 5" H x 7" W x 1.25" D 5" H x 7" W x 1.25" D 5" H x 7" W x 1.25" D Mounted in MSM-type (12.7cm H x 17.8cm W x 3.2cm D) (12.7cm H x 17.8cm W x 3.2cm D) (12.7cm H x 17.8cm W x 3.2cm D) enclosure Enclosure Dimensions 5.75" H x 16.97" W x 1.75" D 5.75" H x 16.97" W x 1.75" D 5.75" H x 16.97" W x 1.75" D 5.88" H x 7.56" W x 1.33" D (14.6cm H x 42.95cm W x 4.45cm D) (14.6cm H x 42.95cm W x 4.45cm D) (14.6cm H x 42.95cm W x 4.45cm D) (14.9cm H x 19.2cm W x 3.4cm D) Humidity 0 to 95% non-condensing Wiegand Reader Interface 4-6 wire Wiegand Interface Ports N/A N/A N/A Mounting Board only or in enclosure MSM-type enclosure Temperature 20° to 120° F / -7° to 49° C Power Source: Twisted pair (shielding optional) connected to Controller via S-Net Wiring Monitor Inputs: Phoenix-type Monitor Inputs: Phoenix-type Monitor Inputs: Phoenix-type Monitor Inputs: Phoenix-type Connectors: Twisted pair Connectors: Twisted pair Connectors: Twisted pair Connectors: Twisted pair (shielding optional) (shielding optional) (shielding optional) (shielding optional) Relay Outputs: Phoenix-type Relay Outputs: None Relay Outputs: Phoenix-type Relay Outputs: Phoenix-type Communication S-Net through 2 (two) RS-485 connectors via the twisted pair (shielding optional) wiring 3 www.honeywellaccess.com ® STAR II STAR II Controller with MIRO Options ORDERING Order # Description Order # Description STAR II Series Controller (CHIP Protocol) Power Options 92410250030 Star II Controller – Supports 2 Doors, 92902031000 PI-1, Power Inserter (24V) with Power Cable — 100,000 Cardholders, 256/96 MIRO Capacity, 115V Elevator Control 92902032000 PI-2, Power Inserter (24V) with Power Cable — 230V STAR I & II Series Controller Personality Chip Sets 92410024055 PI-LC, Universal Low-Cost Power Supply — 92410450020 Star I & II Controller – 4 Door Chip Set; 110/220V Supports 4 Doors 92422230000 UL-PS UL Power Inserter (24V) — (Requires Star I or Star II Controller) 115V for UL294 Star System 92410850020 Star I & II Controller – 8 Door Chip Set; Network Options Supports 8 Doors (Requires Star I or Star II Controller) 92000151000 Cobox Universal Thin Server (110/220 VAC) 92411650030 Star II Controller – 16 Door Chip Set; 92410000020 Micro CoBox Ethernet Interface Supports 16 Doors, 100,000 Cardholders, Communications - Conversion Solutions 255/96 MIRO Capacity, Elevator Control 92043020000 NexLine Coax Adaptor (Requires Star II Controller) 92043060000 NexLine Plus MSM Replacement & Cabinet Options for Star Series Controllers Coax Converter (Controller Not Included) 92043051001 NexStar RS-232 Adaptor 92410000300 Star Controller Modular Enclosure 92043051000 NexStar High Speed Multiplexer 92410000400 Modular Double Board Enclosure for WIRO 4/8/4, MIRO 32/0 and MIRO 2/16 92410086000 Large Cabinet - Space for 3 Full Height or 6 Half Height Boards MIRO Options 92410034840 WIRO 4/8/4 8 Inputs / 4 Outputs & 4 Wiegand Ports (Board Only) 92410020000 MIRO 16/8 16 Inputs / 8 Outputs (Board Only) 92410020200 MIRO 16/8 16 Inputs / 8 Outputs (with Enclosure) 92410026000 MIRO 32/0 32 Inputs / 0 Outputs (Board Only) 92410027000 MIRO 2/16 2 Inputs / 16 Outputs (Board Only) 92410025200 MIRO 4/2 4 Inputs / 2 Outputs (Board in Modular Enclosure) ® STAR is a registered trademark of Honeywell International Inc. For more information: www.honeywellaccess.com Honeywell Integrated Security 135 W. Forest Hill Avenue Oak Creek, WI 53154 414-766-1700 414-766-1798 Fax European Office Böblinger Straße 17 D-71101 Schönaich Germany 49-7031-637-782 92995100049 revE - STAR II 49-7031-637-769 Fax September 2005 www.honeywell.com ©2005 Honeywell International Inc.