Model DA-05 DIN Rail Mount In-Line Amplifier DESCRIPTION These in-line amplifiers feature DIN-rail mount enclosures with front accessible electrical connections and adjustments. Ampli- fiers are available for strain-gage transducers. FEATURES • DIN rail mount • Strain gage transducer input • Bridge-based transducer input • 4 mA to 20 mA three-wire output • 13 Vdc to 28 Vdc power supply • 3 Vdc or 5 Vdc excitation • RFI, ESD protected • CE approved Model DA-05 DIN PERFORMANCE SPECIFICATIONS OPTION CODES Many range/option combinations are available in Characteristic Measure 2-pole filter our quick-ship and fast-track manufacture pro- option Number of channels 1 grams. Please see http://sensing.honeywell.com/ TMsensor-ship for updated listings. Case material Plastic 58e, 2-pole filter 1 Hz 100 Hz Mounting 35 mm DIN setting 3 Hz 300 Hz Certification CE approved 5 Hz 500 Hz 10 Hz 1000 Hz 20 Hz 6200 Hz (350 ohm bridge) ENVIRONMENTAL SPECIFICATIONS 30 Hz 2300 Hz (5000 ohm bridge) 50 Hz Characteristic Measure Temperature, operating -29 °C to 82 °C [-20 °F to 180 °F] Temperature, storage -40 °C to 93 °C [-40 °F to 200 °F] MOUNTINg DIMENSIONS AND CHARACTERISTICS 98,5 mm TRANSDUCER INTERFACE [3.87 in] Characteristic Measure Transducer type Bridge-based sensor Transducer excitation 3 Vdc or 5 Vdc @ 30 mA (short circuit protection) AMPLIFIER CHARACTERISTICS Characteristic Measure Supply voltage 13.5 Vdc to 28 Vdc Current draw 60 mA Zero adjustment range, ±60 % coarse TYPICAL SYSTEM DIAgRAM Zero adjustment range, fine ±10 % Span adjustment range Switch selectable 0.5 mV/V to 13.3 mV/V Span adjustment range, ±20 % fine Linearity ±0.01 % Output 4 mA to 20 mA three-wire Frequency response (-3 db) dc 6200 Hz with 350 ohm bridge dc 2300 Hz with 5000 ohm bridge Rise time (0 % to 90 %) 63 ms with 350 ohm bridge 160 ms with 5000 ohm bridge Signal-to-noise ratio 70 db dc power supply rejection 90 db ratio Not RoHS compliant 2 Honeywell • Sensing and Control Model DA-05 DIN Rail Mount In-Line Amplifier Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847 Email inquiries to info.sc@honeywell.com WARNINg PERSONAL INJURY • DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNINg MISUSE OF DOCUMENTATION • The information presented in this catalogue is for reference only. DO NOT USE this document as product installation information. • Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA 008809-1-EN IL50 GLO +1-815-235-6847 June 2008 Copyright © 2008 Honeywell International Inc. All rights reserved. www.honeywell.com/sensing