GE INTELLIGENT PLATFORMS VMICPCI-7055RC-32x100
Specifications
Environmental
Operating: 0° to +55° C Storage: -25° to +80° C Relative humidity: 10% to 90%, non-condensing Shock 10 Gs, 16 ms half sine, 6 axis, 10 pulses each Vibration 6 Gs RMS (20 – 2000 Hz) random, 0.0185 G2 per Hz spectrum
Ethernet
Three dedicated 10/100/1000BaseTX Ethernet ports -One via a RJ45 front panel port -Two available through a PICMG 2.16 or CompactPCI J3 backplane connection
Features
Up to 2 GB of CompactFlash
LPC I/O
Primary IDE interface activity Board status Power Hot swap LAN activity (located on each RJ45)
Mechanical
Dimensions 6U single slot Eurocard form factor Height 9.2 in. (233.4 mm) Depth 6.3 in. (160 mm) Thickness 0.8 in. (20.3 mm)
MTBF
361,616 hours
OS
Linux VxWorks
Other Features
One serial port on front panel Two additional ports available through the CPCI J3 connector IDE and hard disk support Hardware reset on front panel User programmable watchdog timer Status LEDs on front panel
PMC #1
Two 64-bit/100 MHz PCI-X on PMC expansion sites -Backward compatible to 5V, 33 MHz -Supports double-wide PMC IEEE 1386.1 compliant
Power Requirements
+3.3 VDC, (±5%) 1.7A (typical), 3.04A maximum +5 VDC (±5%) 3.2A (typical), 6.0A maximum ±12 VDC (±5%), 50 mA maximum
Processor
IBM 750GX PowerPC 1.0 GHz Advanced L2 cache 1 MB (IBM 750GX) Utilizes the Next Generation Marvell PowerPC chipset with 2 MB integrated SRAM
SDRAM
Up to 1 GB DDR 400 SDRAM with ECC
Serial
Three high performance serial ports: two support asynch RS232/422/RS485 on rear I/O J3, and one RS232 serial port on front panel using RJ45 connector
Features
- 64-bit/66 MHz CompactPCI bus interface
- Operating system support for VxWorks® and Linux®
- Operating temperature from 0° to +55° C
- Passive heat sink
- Processor speeds up to 1.0 GHz
- RoHS compliant
- Three independent 10/100/1000BaseTX Ethernet ports
- Ultra DMA IDE Controller
- Up to 1 GB DDR 400 SDRAM
- Up to 2 GB CompactFlash
- User programmable watchdog timer
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the VMICPCI-7055RC-32x100?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods