PCI-40A ® Four Slot IndustryPack Carrier for PCI Features • Four IndustryPack slots on a full-length PCI slot board • I/O via four 50-pin keyed, shrouded ribbon cable headers • Switchable 8/32 MHz IndustryPack bus • LEDs for CPU access and power monitor • Filtered power rails and re-settable fuses ® PCI-40A is an IndustryPack carrier board that provides four IndustryPack slots • Interrupt acknowledge on a single desktop or industrial PCI slot card. The IndustryPack bus clock is software- space for retrieving selectable on a per-slot basis between 8 and 32 MHz. IndustryPack vectors The standard 8 MB memory space is available for each IndustryPack site. High-speed 32-bit PCI host address space permits desirable linear mapping and fixed address • Reduced memory-map partitions of memory, I/O and ID spaces for each IndustryPack module. version available by special order The PCI-40A uses a PLX PCI9080 controller as the PCI bus interface chip and Altera FPGA logic, which provides fully configurable PCI interrupt vector space. The PCI bus interface supports 5.0 V signaling. Each IndustryPack site has an adjacent 50-pin I/O connector for exiting the host system through the PCI slot panel. One connector is accessible via the rear-panel. The standard connector permits most of SBS Technologies transition modules and terminal blocks to be used. The PCI-40A meets the PCI specification and conforms to the VITA-4 IndustryPack Logic Interface Specification. This guarantees compatibility with a wide range of IndustryPacks. The PCI-40A targets embedded computing applications in industrial automation, com- munications, transportation and COTS. I/O & COMMUNICATIONS PCI-40A Specifications Number of IndustryPack Slots • Four • Supports up to two double-wide IndustryPacks Specifications IndustryPack Bus Clock • Switchable 8/32 MHz per IndustryPack slot Form Factor • PCI full-length slot IndustryPack Features Supported • I/O space PCI • ID space • PCI Specification, Rev 2.1 • Memory space PCI Controller • Interrupt acknowledge cycles • PLX 9080 IndustryPack Memory Size Carrier Board Memory • 8 MB per IndustryPack* Space • 64 MB* IndustryPack Interrupts Supported • Int0 and Int1 for each slot PCI Bus Interrupts Generated I/O Access • INTA# only • One 50-pin 0.1’’ ribbon cable header per IndustryPack slot • One connector is rear-panel accessible Indicators • One green LED per Fuses IndustryPack slot for • 1.5 A for 5 VDC each slot CPU access • 1.5 A for ±12 VDC each slot • One red LED per rail for power monitor Configurations Power Requirements • +5V VDC, 250 mA typical • +12 V DC, 10 mA typical • -12 V DC, 10mA typical Model Number Configuration • Extra power required for IndustryPack modules 4-slot PCI IndustryPack carrier with 8/32 MHz PCI-40A IndustryPack bus Temperature • Operating: 0˚ to 70˚C Associated Products • Storage: -40˚ to +85˚C 6-slot PCI IndustryPack carrier with 8/32 MHz slots Humidity PCI-60A-8/32 • 5% to 95% non-condensing C-IP50F-IP50F-3 Three foot 50 conductor ribbon cable Weight Six foot 50 conductor ribbon cable • 0.21 kg (0.5 lb) C-IP50F-IP50F-6 50-pin screw terminal block with ribbon cable header Dimensions IP-TERM • 4.2’’ x 12.2’’ *A reduced memory map version of the PCI-40A is available by special order. (106.7 mm x 309.9 mm) Contact SBS at (651) 905-4700 for details. Corporate Headquarters European Headquarters 2400 Louisiana Blvd. NE, #5-600 Memminger Str. 14 Albuquerque, NM 87110-4316 D-86159 Augsburg, Germany Tel 505.875.0600 Fax 505.875.0400 Tel +49-821-5034-0 Fax +49-821-5034-119 Email info@sbs.com Email sales@sbs-europe.com For additional contact information, please visit our web site at www.sbs.com Specifications subject to change without notice. All trademarks and logos are property of their respective owners. ©2002 SBS Technologies, Inc. 20020802