GE Intelligent Platforms CR12 ® Intel Core™ i7 Based Rugged CPCI Single Board Computer Features Specifications The CR12 Rugged Single Board Computer (SBC) • 6U CPCI universal System/Peripheral board from GE Intelligent Platforms features the high • Support for Hot Swap Processor performance, highly integrated Core i7 • Intel Core i7 32 nm Processor; options include but are • Intel Core i7 Processor up to 2.53 GHz processor platform from Intel. not limited to: • Integrated two channel DDR3-1067 memory - ULV @ 1.06 GHz controller with ECC Core i7 offers integrated graphics and memory - LV @ 2.0 GHz controller plus dual core processing up to 2.53 • Up to 4 MB shared cache - SV @ 2.53 GHz GHz all in one device. Coupled with the Mobile • Up to 4 MB shared cache • Up to 8 GB soldered DDR3 SDRAM with ECC Intel QM57 Express Chipset this provides an • Integrated two channel DDR3-1067 memory • Up to 16 GB NAND Flash (soldered) controller with ECC unmatched level of I/O bandwidth for both on- • Dual on-board Expansion Sites: 2x PCI-X PMC SDRAM board and off-board functions. and 1 x4, 1 x8 PCIe XMC • Maximum memory configuration of up to 8 GB DDR3 • Front I/O: Features of the Core i7 processor SDRAM soldered with ECC - 2x Gigabit Ethernet ports Flash Memory • Intel Intelligent Power Technology allows - 1x VGA Soldered NAND flash array up to 16 GB • processors to operate at optimal frequency - 1x USB UEFI (replaces BIOS) and power. - 1x COM port • The CR12 System UEFI includes all functions required • Intelligent performance on-demand with by the processor core and chipset • Rear IO: Intel Turbo Boost Technology • Will also support expansion ROM code for remote - 2x Gigabit Ethernet ports (PICMG 2.16) • Multi-level shared cache improves booting from either of the dual Ethernet ports - 1x VGA (2 ports possible if front IO not performance and efficiency by reducing Ethernet required) latency to frequently used data Dual Gigabit Ethernet interface via two Intel 82574 • - 2x DVI • Hyper-Thread Technology – 2 threads per Gigabit Ethernet controllers – routed to front panel - 3x SATA2 (3 Gb/s) ports core • Dual Gigabit Ethernet interface via two Intel 82574 ® - 2x COM ports • Streaming SIMD extensions 4.1/4.2 Gigabit Ethernet controllers – routed to rear (PICMG - 4x USB ports 2.16 compliant) In addition to a comprehensive range of - 13x GPIO USB Ports onboard I/O features, the CR12 also offers two - 2x PMC (64 I/O signals per site) • Three USB 2.0 ports: one routed to front panel I/O, and on-board mezzanine expansion sites for two to rear P2 connector • BIOS backup Flash enhanced system flexibility, both of which offer Keyboard and Mouse (PS2) emulation via USB • • Optional on-board SATA HDD PMC and XMC capability. Memory resources CompactPCI Backplane Interface • Optional conduction cooling include up to 8 GB DDR3 SDRAM, 16 GB NAND • PICMG 2.0 R3.0 compliant CPCI local bus standard • Optional extended operating temperature Flash, optional SATA hard drive, BIOS Flash and Serial Ports range BIOS backup Flash. • Three 16550 compatible full duplex async serial ports • Single slot 6U CPCI form factor • One routed to front panel RS232 (COM3) ® The CR12 is designed to meet the requirements • Operating system support for VxWorks , Two routed to P2, with user selectable RS232/422/485 • ® ® Linux , and Windows of a wide range of applications from industrial • Ports feature independent 16-byte FIFO supporting baud rates up to 115 Kbaud through to fully rugged Defense and Aerospace programs. It offers extended temperature capability and a range of air and conduction cooled build levels. CR12 Intel Core i7 Based Rugged CPCI Single Board Computer Specifications (continued) Processor - μFCBGA, Low Power Design Block Diagram • Up to 2 on-board mezzanine expansion sites - Site 1 PMC (PCI-X up to 64-bit /133 MHz) and XMC (x8 PCIe Gen 2) capable - Site 2 PMC (PCI-X up to 64-bit /133 MHz) and XMC (x4 PCIe Gen 2) capable • PCI signaling is 3.3V, 5V tolerant Video • Provided via the integrated Intel Graphics Controller • One VGA port routed to front panel (or optionally to rear panel) • One VGA port plus two TMDS (DVI-D) ports routed to rear I/O (for use with CTM20) • Any 2 ports can be used for dual display operation SATA • Three SATA2 (3 Gb/s) ports to rear I/O GPIO 13 GPIO pins – software configurable • On-board Hard Drive • 2.5” SATA hard drive or Flash disk can be optionally ordered (precludes use of PMC/XMC site 2) Power Requirements • +5, +3.3V, +12V (plus -12V if required by mounted PMC module) EEPROM/Watchdog/RTC/Timers/Temp sensors 512 kbit serial EEPROM for non-volatile user data • • SuperIO watchdog • 146818 RTC compatible with Li battery (battery not on Level C, D, E variants) • Legacy PC-AT timer and HPET (High Precision Event Timer) provided from QM57 CPU die and Chipset die, software readable • Other HW Features • Hardware Write Protection (rear pin) • Front power button (and rear) • Three status LEDs and four BIT status LEDs at front, two status LEDs signals at rear • IPMI 2.0 Controller (PICMG 2.9) Transition Module • CTM20 Software Environmental Support for Windows, Linux, VxWorks • Level 1 Level 2 Level 3 Level 4 Level 5 Cooling Method Convection Convection Convection Conduction Conduction Conformal Coating Optional Standard Standard Standard Standard High/Low Temp 0 to +55° C -20 to +65° C -40 to +75° C -40 to +75° C -40 to +85° C Operational (300 ft/m) (300 ft/m) (600 ft/m) At cold wall At cold wall 2 2 2 2 2 Random Vibration 0.002g/Hz* 0.002g/Hz* 0.04g/Hz** 0.1g/Hz** 0.1g /Hz** Shock 20g*** 20g*** 20g*** 40g*** 40g*** *With a flat response to 1000 Hz, 6 dB/Oct roll-off from 1000 to 2000 Hz ** From 10 to 1000 Hz *** Peak sawtooth 11 ms duration About GE Intelligent Platforms GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology company and a global provider of hardware, software, services, and expertise in auto- mation and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit www.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms. All Rights Reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 12.10 GFA-1306