GE Fanuc Embedded Systems CEI-715 Interface for PCMCIA The GE Fanuc Embedded Systems CEI-715 is an Features Architecture intelligent, high-density, Type II PC Card (PCMCIA) • Up to 8 Rx, 4 Tx ARINC 429 channels The flexible design of the CEI-715 provides a pow- interface that provides up to 12 fully independent erful hardware foundation that supports multiple • Available with ARINC 429, 573, 717, CSDB and ARINC 429/575 channels, along with up to avionic protocols in a single, integrated, portable ARINC 561 6-wire on same card 4 bi-directional avionics level I/O discretes. package. Bi-directional discretes support TTL to • 4 bi-directional avionics-level discretes Features include programmable data rates and avionics-level inputs while open-collector outputs • Configuration available with ARINC 429, parity, error detection, multiple buffering modes, enhance application flexibility. avionics-level discretes and digital I/O timetagging and automatic transmit slew rate ad- justment. Hardware interrupts are not supported. GE Fanuc Embedded Systems’ powerful API • Fully independent channel operation libraries provide total flexibility in receiving and • Type II PC Card (PCMCIA) Configuration options include selection of chan- generating ARINC bus traffic. API support for the • Easy-to-use BusTools/ARINC Windows-based nel count, along with a mix of ARINC 429, ARINC CEI-715 is compatible with the software API on GE GUI Bus Analyzer available 573/717, CSDB and ARINC 561 6-wire protocols. Fanuc Embedded Systems’ CEI-220/300/420/500/ • ARINC 615 Data Loader GUI available 520/600/620 and 820 products for PC/AT, PC/104, Software PCI, CompactPCI and PMC platforms. • High-level Windows XP, 2000, Me, NT, 98, 95, GE Fanuc Embedded Systems software tools Visual Basic and LabWindows/CVI software significantly reduce the time required to integrate API support ARINC protocols and I/O discretes into your • 64-bit, 1 microsecond time-tagging portable application. Included with the CEI-715 is • Available with ARINC 615 Data Loader and high-level API (Application Programming Interface) ARINC 615 cabling library support for Windows XP, 2000, Me, NT, 98, 95 and Visual Basic and LabWindows/CVI software development. BusTools/ARINC, GE Fanuc Embedded Systems’ Windows-based GUI solution for bus analysis, simulation and data logging, is optionally available. It provides an easy-to-use interface to avionics data. ARINC 615 Data Loader and LabVIEW support are optionally available. CEI-715 Interface for PCMCIA Physical / Environmental Tools and Solutions Specifications • Type II PC Card (PCMCIA 2.1 compatible) BusTools/ARINC is an easy-to-use, Windows XP/2000/ • Cabling to 37-pin D-type receptacle connector pro- Me/NT/98/95-based ARINC 429 bus analysis, simulation ARINC 429 Receive Channels vided (part number CONCEI-715) and data monitoring solution that is optionally available • Number of channels: up to 8 • Operating temperature range: 0 to +40° C on the portable CEI-715 and other GE Fanuc Embedded • Baud rates: Programmable 5 KHz to 200 KHz • Extended temperature range available Systems hardware products. Monitor multiple channels • Input levels: ± 6.5 to ±13 VDC (A to B) • Relative humidity: 5 to 90% (non-condensing) in real-time. Display and enter time-tagged data in hex, • Parity: odd, even or none binary or engineering units (standard or userdefined). • Error reporting: parity Discrete Inputs/Outputs Filter received data by label and/or SDI. View discrete de- • Buffering: 2048 labels per channel • Number of bi-directional lines: 4 scriptors and user-bit-encoded values. Display historical • Inputs: support avionics-levels (open/gnd or high/low) and real-time charts of individual labels. Use BusTools/ ARINC 429 Transmit Channels and TTL/CMOS ARINC to send multiple messages of varying sizes with • Number of channels: up to 4 • Outputs: low side switches, each capable of automatic ramping. Log all time-tagged data from mul- • Baud rates: Programmable 5 KHz to 200 KHz sinking 0.5 ampere tiple channels to a single disk file. Replay recorded data • Automatic slew rate adjustment on transmit buses. • Output level: ±10 VDC (A to B) Additional Protocols Supported • Parity: odd, even or none • ARINC 573/717 Bi-Polar RZ and Harvard Bi-Phase, • Buffering: 2048 labels per channel (Rx and Tx) • ARINC 561/568 6-wire receive, (Rx only) Receive Channel Buffering • CSDB, (Rx and Tx) • 2048 labels per channel or merged mode buffer, independently selectable for each channel Power (typical) • 64-bit, 1 µsecond resolution time-tag with each word • +5 VDC: 250 mA (CEI-715-84) Software MTBF • API – High-level API libraries for Windows XP, 2000, Me, • 304,000 hours at +25° C, ground benign environment NT, 98, 95, Visual Basic and LabWindows/CVI included • GUI – Optional BusTools/ARINC GUI bus analyzer • ARINC 615 Data Loader – Optional GUI • LabVIEW – Support optional Ordering Information CEI-715-22: ARINC 429 PCMCIA interface with 2 Rx, 2 Tx channels and 0 I/O discretes CEI-715-42: ARINC 429 PCMCIA interface with 4 Rx, 2 Tx channels and 2 I/O discretes CEI-715-44: ARINC 429 PCMCIA interface with 4 Rx, 4 Tx channels and 4 I/O discretes CEI-715-84: ARINC 429 PCMCIA interface with 8 Rx, 4 Tx channels and 4 I/O discretes CEI-715-M: PCMCIA interface with 2 Rx/2 Tx channels of ARINC 429; 1 Rx/1 Tx of ARINC 573/717 HBP/BPRZ or 1 Rx/1 Tx of CSDB; 1 Rx of ARINC 561 6-wire; and 4 bi-directional I/O discretes CEI-715-41-D: ARINC 429 PCMCIA interface with 4 Rx, 1 Tx channels; 4 bi-directionsl avionics-level discretes; 4 digital (TTL) inputs; and 12 digital (TTL) outputs Optional Software BusTools/ARINC: Bus Analysis and Simulation software for Windows XP, 2000, Me, NT, 98 and 95 CEI-DL: ARINC 615-3 Data Loader GUI CEI-LV: LabVIEW support for ARINC 429 About GE Fanuc Embedded Systems GE Fanuc Embedded Systems is a leading global provider of embedded computing solutions for a wide range of industries and applications. Our comprehensive product offering includes many types of I/O, single board computers, high performance signal processors, fully integrated, rugged systems including flat panel displays, plus high speed networking and communications products. The company is head- quartered in the U.S. and has design, manufacturing and support offices throughout the world. Whether you’re looking for one of our standard products or a fully custom solution, GE Fanuc Embedded Systems has the breadth, experience and 24/7 support to deliver what you need. For more information, visit www.gefanucembedded.com. GE Fanuc Embedded Systems Additional Resources Information Centers For more information, please visit the GE Fanuc Americas: Embedded Systems web site at: 1 800 322 3616 or 1 256 880 0444 www.gefanucembedded.com Asia Pacific: 86 10 6561 1561 Europe, Middle East and Africa: +49 821 5034-0 ©2007 GE Fanuc Embedded Systems, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 07.07 GFA-936