GE INTELLIGENT PLATFORMS CONCEI-220

Why buy from GID?

Quality

We are industry veterans who take pride in our work

Protection

Avoid the dangers of risky trading in the gray market

Access

Our network of suppliers is ready and at your disposal

Savings

Maintain legacy systems to prevent costly downtime

Speed

Time is of the essence, and we are respectful of yours

Details

Part Number CONCEI-220
Manufacturer GE INTELLIGENT PLATFORMS
Category ARINC 429 Ribbon Transition Cable
Price Request Quote
Lead Time Request Quote

Description

GE INTELLIGENT PLATFORMS CONCEI-220, ARINC 429 20" ribbon cable transitions from the rear (P4) connector on the CEI-220 to a 37 pin D-sub male connector mounted on a PC expansion card end-panel.

Request a Quote

* indicates a required field.
Your Contact Information
Your Company/Organization
Your Requirement
By sending us your information, you are affirming your agreement with our Privacy Policy.
You will not receive unsolicited communications.

Our Process

Our Process: Preparation
Preparation

Once you accept your quote and confirm your order, we prepare by retrieving related parts and components from our inventory. Anything we do not currently have in stock is sourced.

Our Process: Receiving
Receiving

Upon receipt, all parts are visually inspected for damage and then photographed to document their condition. Parts acquired from vendors must meet our quality standards.

Our Process: Initial Testing
Initial Testing

Industrial computer boards and other parts we are equipped to evaluate are tested to verify functionality and discover possible damage.

Our Process: Refurbishment
Refurbishment

Industrial computer boards have all components with low MTBF numbers (such as capacitors and connectors) replaced and are washed in our PCB cleaner to remove dust and grime.

Our Process: Repair
Repair

Industrial computer boards are fully diagnosed and repaired by our engineers. Logs of the problems encountered and solutions implemented are recorded.

Our Process: Final Testing
Final Testing

Industrial computer boards have all I/O connections rigorously tested to ensure that everything is working properly before the board is certified as ready to ship.

Our Process: Shipping
Shipping

After photos are taken to document the exterior condition of the part, it is packaged and sent to the customer. ESD-safe materials are used to protect sensitive equipment on its journey.

Who We Are

Industrial Trading is a website of GID Industrial, an ISO 9001:2015-certified company that has specialized in servicing industrial computer boards and providing other industrial products for sectors including manufacturing, defense, aerospace, entertainment, healthcare, and more by utilizing our combined skills and vast international network of trusted suppliers since our founding in 2015.

Do you need a CONCEI-220? We can help you find it at a competitive price!

Features

  • From: DB37 female
  • Included with every CEI-220
  • Platform: ISA
  • To: DB37 male on end panel

Datasheet

Download "GE Intelligent Platform-RCONQPMC-series-datasheet1-153093292.pdf" (363 KiB)

Extracted Text

Avionics Cable Guide Where Used Platform Part Number & Description From To Picture Included with every ISA DB37 female DB37 male on end CONCEI-220 (1320-010) CEI-220 panel 20" ribbon cable transitions from the rear (P4) connector on the CEI-220 to a 37 pin D-sub male connector mounted on a PC expansion card end-panel. Included with every PCI SCSI-3 68-pin SCSI-3 68-pin RCONSCSI3-6 (1320-046-8) CEI-520 male male 72" cable (with twisted pairs) transitions CEI-520A from the card end (P2) connector on the RCEI-530 CEI-520/520A, CEI-530, CEI-830, R830RX CEI-830 or P-SER to a SCSI-3 connector. This R830RX cable is for ARINC signals only. P-SER RAR-PCIE CEI-520/520A rear connector (P3) Optional for contains I/O discretes only see CONM50- CEI-820TX D37 One or two included cPCI RCONCEI-620 (1320-012-8) Champ (0.8 DB50 male with every PMC mm) 50 male 36" cable (with twisted pairs) transitions CEI-620 (screw-lock) from a card end connector (P1 or P2) on CEI-820 the CEI-620, CEI-820 or RAR-cPCI to a 50 RAR-cPCI pin D-sub male connector. Optional for CEI-600-4 One included with every PCMCIA Card edge 32 DB37 female RCONCEI-715A (1320-085-8) RCEI-715A pin cable A 30" cable (with twisted pairs) transitions BTA-R715A-44 mounted from the card edge connector on the connector RCEI-715A to a 37 pin D-sub with socket/female contacts. Data loader cable for: Express Card edge 615 Airborne RCONA615-8 (1320-068-9) RAR-EC Card champ 36 Computer A 30" cable (with twisted pairs) transitions latching plug Connector from the card edge connector on the RAR- MS27473T-18A- EC (champ 36) to a 37 pin D-sub with 53P socket/female contacts. One included with every Express Card edge DB37 female RCONRAREC-30 (1320-062-8) RAR-EC Card champ 36 A 30" cable (with twisted pairs) transitions latching plug from the card edge connector on the RAR- EC (champ 36) to a 37 pin D-sub with socket/female contacts. One included with every Express Card edge One male HD-15, RCONAF-EC (1320-065-8) RAF-EC-2P Card A 6”cable transitions from the card edge champ 36 Two RJ-45 BTP-AFDX latching plug shielded connector on the RAF-EC-2P (champ 36) BTP-AIL-A1 connectors to one male HD-15 connector and two shielded RJ-45 connectors. Data loader cable for: PCMCIA and PCMCIA card 615 Airborne RCONA615-1A (1320-087-8) RCEI-715A ARINC 615 edge 32 pin Computer 10 foot cable transitions from the card Data Loader cable mounted Connector edge connector on the RCEI-715A to an connector MS27473T-18F- ARINC 615 Airborne Computer Connector 53P (MS27473T-18A-53P). Includes a strain- relief clip. Where Used Platform Part Number & Description From To Picture One included with PCMCIA and PCMCIA card 615 Airborne CONA615-1 (1320-006) CEI-715-DL-2 ARINC 615 edge 32 pin Computer 10 foot cable transitions from the card CEI-715-DL-BT-2 Data Loader double wide Connector edge connector on the CEI-715 to an cable mounted MS27473T-18A- ARINC 615 Airborne Computer Connector (MS27473T-18A-53P). Includes a strain- connector 53P relief clip. One included with ARINC CONA615-2 (1320-007) 615 Data 603 Airborne CEI-715-DL-2 615 Data Loader Cable Computer A 12" cable transitions from an ARINC 615 CEI-715-DL-BT-2 Loader Connector Connector Data Loader Cable Connector (JT01RE- JT01RE-18A- MS24266R-18B- 18A-53S) to an ARINC 603 Airborne 53S 31P Computer Connector (MS24266R-18B- 31P) Optional ARINC 615 Data CMU-900 CONA615-3 (1320-008) CONA615-3 615 Data Loader Cable Connector DB25 A 12" cable transitions from an ARINC 615 Loader Connector Female Data Loader Cable Connector JT01RE- JT01RE-18A- 18A-53S to a CMU-900 Connector DB25 53S Female One included PMC SCSI-3 Two CJ70 jacks CONPMC708 (1320-045) for each Transitions from the P-708 card-end 68 Pin Male P-708 connector into two cables with CJ70 MAC-H2 Twinax, 3 lug, 1553 cable jack ends for transformer coupling. One assembly included VXI 2CONV1553-5 Low profile Two male CJ70 for each IDC-50 (0.1" jacks, two male (1320-030 + 2conv50-D25) IP-708 on VXI-AIC center) female BNC jack An 18" cable assembly transitions from an IP-708 Module ribbon connector on the VXI-AIC to two 8" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends. Optional for ISA IDC 50 (0.1" DB37 female on CONM50-D37 (see bom assy in CEI-300 PCI center) female end panel MAS200) CEI-500 PCIE A 15" ribbon cable transitions from CEI-520/520A VME individual IP modules on various carrier VME-MIO boards to a 37 pin D-sub female connector VME-AIC mounted on a PC expansion card end- panel. This allows external connection to Supports pins 1-37 on an individual IP Module. The IP-429HD end-panel is easily removed from the D- IP-CSDB sub connector. Also can be used for CEI- IP-573/717 520/520A I/O discretes (P3). IP-561A CEI-520/520A (P3) CONM50-D37-30 (see bom assy in RCEI-530 MAS200) RAR- This cable is identical to the CONM50-D37 above but 30" long. Included with every PCMCIA PCMCIA card Two male CJ70 CONPCCARD-1 (1320-017) PCCARD-1553-SA edge 32 pin jacks, DB09 Transitions from the PCCARD-1553 card BT3-PCCMA edge connector into two 36" cables with double wide female cable mounted CJ70 Twinax, 3 lug, 1553 cable jack ends connector for transformer coupling, and a single 6" cable with a 9 pin D-sub female connector for direct coupling and I/O triggers. Where Used Platform Part Number & Description From To Picture Included with every PCMCIA PCMCIA card Four male CJ70 CONPCCD-2 (1320-041) two-channel Transitions from the PCC-D1553 card edge 32 pin jacks, DB09 PCC-D1553 double wide female edge connector into four 36" cables with cable mounted CJ70 Twinax, 3 lug, 1553 cable jack ends connector for transformer coupling, and a single 6" cable with a 9 pin D-sub female connector for direct coupling and I/O triggers. Included with every PCMCIA PCMCIA card Two male CJ70 CONPCCD-1 (1320-044) single-channel edge 32 pin jacks, DB09 Transitions from the PCC-D1553 card PCC-D1553 edge connector into two 36" cables with double wide female cable mounted CJ70 Twinax, 3 lug, 1553 cable jack ends connector for transformer coupling, and a single 6" cable with a 9 pin D-sub female connector for direct coupling and I/O triggers. One included for every PCI DB15 male Two male CJ70 RCONP1553-1 (1320-019-8) (non-IRIG) channel on: ISA jacks, two male Transitions from each card end (non-IRIG) PCI-1553 VME BNC jacks connector on various boards into two 8" ISA-1553 VXI cables with CJ70 Twinax, 3 lug, 1553 VME-1553 cable jack ends, and two 8" cables with QVME-1553 BNC cable jacks for I/O triggers. RQVME2-1553 VXI-1553 QVXI-1553X One included to support VME DB15 male Two male CJ70 CONW1553-1 (1320-036) IRIG on: VXI jacks, four male Transitions from a card end connector QVME-1553 w/IRIG BNC jacks (with IRIG) on the QVME-1553 or QVXI- QVXI-1553X w/IRIG 1553X into two 8" cables with CJ70 RQVME2-1553 w/IRIG Twinax, 3 lug, 1553 cable jack ends, and four 8" cables with BNC cable jacks for I/O triggers and IRIG Rec/Gen. One included for each cPCI CONC1553-1 (1320-029) Champ (0.8 Two male CJ70 IP-1553 on: PMC mm) 50 male jacks, two male Transitions from each Champ 50 cPCI-1553-IP BNC jacks connector on various boards' front panel to PMC-1553 two 18" cables with CJ70 Twinax, 3 lug, CEI-600-4 1553 cable jack ends, and two 18" cables IP-708 with BNC cable jacks for I/O triggers. One cable included for VME IDC 50 (0.1" Two male CJ70 CONV1553-3 each IP-1553 or single- VXI center) female jacks, two male (2CONM50-D25 + 1320-005-8 + channel IP-D1553 on: BNC jacks 1320-030) IP-708 An 18" cable assembly transitions from VME-1553-IP6 individual IP Module ribbon connectors on VME-1553-IP9 VME and VXI front panels to two 8" cables VXI-1553-IP6 with CJ70 Twinax, 3 lug, 1553 cable jack VXI-1553-IP9 ends, and two 8" cables with BNC cable VME-MIO-5 jacks for I/O triggers. VME-MIO-8 VME-MIO-9 Optional 1553 3 lug CJ70 Twinax CJ70 Twinax CON1553-3 (1320-037) 3 lug Twinax Twinax 78 ohm bus 36” cable assembly, 3lug, plug 3 lug 1553 3 lug 1553 connection cables to plug, Twinax connectors CON1553-15 (1320-042) 78 ohm bus 15’ cable assembly, 3lug, plug to plug, Twinax connectors Where Used Platform Part Number & Description From To Picture One included for each VME SCSI-2 50 pin Two male CJ70 CONV1553-4 (1320-032) IP-1553 or single- VXI Transitions from each SCSI-2 connector male jacks, two male channel IP-D1553 on: cPCI BNC jacks on a VME, VXI or CEI-600-6 front panel to IP-708 two 18" cables with CJ70 Twinax, 3 lug, VME-1553-IP7 1553 cable jack ends, and two 18" cables VXI-1553-IP7 with BNC cable jacks for I/O triggers VME-MIO-8 VXI-MIO-8 CEI-600-6 One included for each VME SCSI-2 50 pin Four male CJ70 CONV1553-6 (1320-033) two-channel IP-D1553 VXI male jacks, DB09 Two channels of dual-redundant 1553. on: cPCI Transitions from each SCSI-2 connector Female VME-MIO-8 on a VME, VXI or CEI-600-6 front panel to VXI-MIO-8 four 18" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends, and D-Sub 9 pin connector for additional I/O. One pair included for ISA IDC 50 (0.1" DB25 female on 2CONM50-D25-1 each IP-1553 on: center) female end panel (1320-005-8 + ribbon cbl assy) PC-1553-IP An 18" ribbon cable transitions from CEI-300 individual IP Module ribbon connectors on IP-708 the ISA (PC/AT) carrier board to a 25 pin female D-sub connector mounted on a PC expansion card end-panel. DB25 male Two male CJ70 COND25-1553 (R2) (1320-030) jacks, two male Transitions from a 25 pin D-sub connector BNC jacks on a PC expansion card end-panel to two 8" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends, and two 18" cables with BNC cable jacks for I/O triggers. One pair included for PCI IDC 50 (0.1" DB25 female on RCONM50-D25-2 (1320-005-8) each IP-1553 or single- center) female end panel An 18" ribbon cable transitions from channel IP-D1553 on: individual IP Module ribbon connectors on PCI-1553-IP the PCI carrier board to a 25 pin female D- CEI-500-4 sub connector mounted on a PC expansion card end-panel. DB25 male Two male CJ70 COND25-1553 R2) (1320-020-030) jacks, two male Transitions from a 25 pin D-sub connector BNC jacks on a PC expansion card end-panel to two 8" cables with CJ70 Twinax, 3 lug, 1553 cable jack ends, and two 18" cables with BNC cable jacks for I/O triggers. 1-channel board One cPCI SCSI-3 Two CJ70 jacks, RCONQPMC-1 (1320-028-8) cable included for each PMC 68 Pin Male DB50 Female Transitions from a SCSI-68 pin connector QPMC-1553 PCI to two CJ70 Twinax, 3 lug, 1553 cable jack QPCI-1553 XMC ends and one D-Sub 50 pin connector for QCP-1553 PCIE additional I/O. QPM-1553 EPMC-1553 QPCX-1553 RPCIE-1553 RXMC1553 2-channel board One cPCI RCONQPMC-2 (1320-020-8) SCSI-3 Four CJ70 jacks, cable included for each PMC 68 Pin Male DB50 Female Transitions from a SCSI-68 pin connector QPMC-1553 PCI to four CJ70 Twinax, 3 lug, 1553 cable QPCI-1553 XMC jack ends and one D-Sub 50 pin connector QCP-1553 PCIE for additional I/O. QPM-1553 EPMC-1553 QPCX-1553 RPCIE-1553 RXMC1553 Where Used Platform Part Number & Description From To Picture 4-channel board One cPCI SCSI-3 Eight CJ70 jacks, RCONQPMC-4 (1320-021-8) cable included for each PMC Transitions from a SCSI-68 pin connector 68 Pin Male DB50 Female QPMC-1553 PCI to eight CJ70 Twinax, 3 lug, 1553 cable QPCI-1553 PCIE jack ends and one D-Sub 50 pin connector QCP-1553 for additional I/O. QPM-1553 EPMC-1553 QPCX-1553 RPCIE-1553 One cable included with PMC SCSI-3 Nine CJ70 jacks CONPMC-MMSI (1320-067) each 68 Pin Male Transitions from a SCSI-68 pin connector PMC-MMSI Interface to nine CJ70 Twinax, 3 lug, 1553 cable board jack ends for 8 MMSI channels plus one monitor channel. 1-channel board Low Profile SCSI Two CJ70 jacks, RCONR15-LPCIE-1 One cable included for PCIE 50 Pin DB37 Female (1320-076-8) each Male Transitions from a SCSI-50 pin connector R15-LPCIE to two CJ70 Twinax, 3 lug, 1553 cable jack ends and one D-Sub 37 pin connector for additional I/O. 2-channel board Low Profile SCSI Four CJ70 jacks, RCONR15-LPCIE-2 One cable included for PCIE 50 Pin DB37 Female (1320-077-8) each Male Transitions from a SCSI-50 pin connector R15-LPCIE to four CJ70 Twinax, 3 lug, 1553 cable jack ends and one D-Sub 37 pin connector for additional I/O. Optional for PMC SCSI-3 68-pin DB15 female, CONP10SF (1320-049) P-10SF male Four RJ-45 Transitions from a SCSI-68 pin connector Shielded to a 15 pin D-sub female connector and Connectors four RJ-45 shielded connectors. One mating connector PC/104 P1 Custom cable Q104-1553 Mating Connector included with each (2220-007) Q104-1553 or Q104- Used by customer in building their cable. 1553-P board One included with PMC SCSI-3 Sixteen CJ70 CONP1553-8 (1320-048) EPMC-1553 8-channel 68 Pin Male jacks, DB50 Transitions from a SCSI-68 pin connector board Female to sixteen CJ70 Twinax, 3 lug, 1553 cable jack ends and one D-Sub 50 pin connector for additional I/O. One included with every Express Card edge Two male CJ70 RCONR15- EC-1 (1320-060-8) R15-EC-1 Card champ 36 jacks, DB09 Transition from the card edge connector latching plug female on the R15-EC-1 (champ 36) into two 36" cable with CJ70 Twinax, 3 lug, 1553 cable jack ends for transformer coupling, and a single 4" cable with a 9 pin D-sub female connector for direct coupling and I/O triggers. One included with every Express Card edge Four male CJ70 RCONR15- EC-2 (1320-061-8) R15-EC-2 Card Transition from the card edge connector champ 36 jacks, DB09 latching plug female on the R15-EC-1 (champ 36) into four 36" cable with CJ70 Twinax, 3 lug, 1553 cable jack ends for transformer coupling, and a single 4" cable with a 9 pin D-sub female connector for direct coupling and I/O triggers. Where Used Platform Part Number & Description From To Picture Optional with XMC SCSI-3 Eight male CJ70 RCONRXMC2-4 (1320-075-8) RXMC2-1553 Transitions from a SCSI3-68 pin connector 68 Pin Male jacks, DB50 female (male) to eight CJ70 Twinax, 3 lug, 1553 cable jack ends and one DB50 (female) for additional I/O MIL-STD-1553 Connection Accessories The following Connection Accessories will meet the majority of general MIL -STD-1553 cabling needs. Contact Condor to discuss your specific cabling, bus-coupling and termination requirements. CON1553BK-2T MIL-STD-1553 Single Bus, Single Stub Kit. Contains two singlestub couplers, three 15 foot cables and two 78 ohm terminators. Two sets required for dual redundancy. CON1553BK-4T MID-1553 Single Bus, Dual Stub Kit. Contains tw o stub couplers, five 15 foot cables and tw o 78 ohm terminators. Tw o sets required for dual redundancy CON1553BC1 Single Stub MIL-STD-1553 transformer bus coupler w ith 3 lug Jack connectors CON1553BC2 Dual Stub MIL -STD-1553 transformer bus coupler w ith 3 lug Jack connectors. CON1553BC3 Tri Stub MIL -STD-1553 transformer bus coupler w ith 3 lug Jack connectors. CON1553BC4 Quad Stub MIL-STD-1553 transformer bus coupler w ith 3 lug Jack connectors. CON1553TRM MIL-STD-1553 78 ohm Terminator (2W-1%), 3 lug Plug connector. CON1553-3, CON1553-15, CON1553-25 MIL-STD-1553 PVC, 78 ohm bus cable in lengths of 3, 15 and 25 feet respectively, w ith 3 lug Plug connectors attached. (Plug connectors w ill mate to Jack connectors on couplers and Condor transition cables).

Related Products

None available

Disclaimer

Any product names, logos, brands, and other trademarks or media featured or referred to on Industrial Trading are the property of their respective owners.

GID Industrial is not an authorized distributor, reseller, or representative for the products featured on this site, and is not affiliated with, sponsored by, or endorsed by any of the manufacturers or holders of the rights to the aforementioned products.

All information on this site is displayed strictly for identification purposes and does not indicate a relationship with or an approval from any third parties.

Industrial Trading is a GID Industrial website.
GID Industrial Logo
Copyright © 2022 GID Holdings LLC, All Rights Reserved.
Page generated in 0.085 seconds.