GE INTELLIGENT PLATFORMS CEI-200-22

����������������� ������� ������������������� ����� ��������������� � Up to 8 receive and 4 transmit ARINC 429 channels � Intelligent interface with large buffers � Low cost � Interrupt-driven or polled operation � 100% full-load rated � 32-bit time tagging � Full featured API included for Windows Me, NT, 98, 95, Visual Basic and LabWindows/CVI Hardware BusTools/ARINC, Condor’s Windows- based GUI software, is an optionally � Easy-to-use BusTools/ARINC available integrated solution for ARINC Windows-based GUI bus analyzer The CEI-200 is a full-function ARINC databus analysis, simulation, and available 429 interface platforms for IBM PC/AT testing. API libraries are also available. and compatible ISA bus computers. An � High performance processor on-board processor allows this interface � Three receive buffering Architecture to keep up with maximum ARINC 429 mechanisms data rates on all channels without loading down the PC host. Dual-ported � Two transmit mechanisms The CEI-200 uses a 16MHz, 16-bit Intel RAM provides large data buffers and the 80186 processor, interfaced to the host � Support for 2-wire ARINC 419, optimal host computer interface for computer via high performance, 16-bit 561, 575 and 582 also available performance and versatility. Dual-Ported RAM (16Kbyte or 32Kbyte). Software The CEI-200 utilizes Condor’s unique ROMless design, where the controlling firmware executes in Dual-ported RAM. Accelerate ARINC 429 development and This greatly simplifies access to on- testing activities with Condor’s powerful board firmware in custom applications, software tools and solutions. Rapidly while supporting transparent upgrades develop your own ARINC applications of factory firmware. Expensive with our versatile high-level API emulators and specialized development (Application Programming Interface) systems are not required, as users can libraries for Windows Me, NT, 98, 95, easily modify the firmware with standard Visual Basic, and LabWindows/CVI. DOS based compilers. Optional high-level API support for LabVIEW VI is available. 101 W. Anapamu Street, Santa Barbara, CA 93101 Tel 805.965.8000 • Fax 805.963.9630 ������� ����������������� ������������������� ����� �������������������������������������� �������������� Configurations with up to 8 receive and 4 transmit ARINC �������������������������� channels are available on the CEI-200. Industry standard ■ Number of channels: up to 8 chip sets provide full functionality for any ARINC bit rate. ■ Data rates: 12-14.5 KHz , 100 KHz or programmable ■ Input levels: ± 6.5 to ±13 VDC (A to B) ARINC channel data is accessed via large data buffers in ■ Filtering: label and/or SDI efficient, Dual-Ported memory, assuring absolute data ■ Parity: odd or none validity with minimal host intervention. 32-bit time tagging with selectable resolution is supported, and the hardware ��������������������������� can run in either interrupt-driven or polled modes. ■ Number of channels: up to 4 ■ Data rates: 12.5 KHz or 100 KHz Incoming data can be filtered by label and/or SDI for each ■ Standard output level: ±10 VDC (A to B) receive channel. Three different methods for buffering ■ Parity: odd, even or none received data provide total flexibility in reviewing ARINC bus traffic: Buffered Mode utilizes a separate circular ��������������������������� buffer for each channel; Merged Mode combines all data ■ API - Includes high-level API for received into a single, time-sequenced circular buffer; and Windows Me, NT, 98, 95, DOS, Visual Basic and Dedicated Mode allows you to view only the very latest LabWindows/CVI data, by updating individual locations in memory for each - Source code API library included combination of label and channel. On-board firmware either ■ GUI - Optional BusTools/ARINC GUI bus analyzer automatically schedules messages or transmits from ■ LabVIEW - Support optional a FIFO. ������������ ■ ��������� � �������������� Processor: 16 MHz 80C186 ■ RAM: 16 Kbyte or 32 Kbyte ���������� ARINC 429 intelligent PC/AT card with ������������������������ 2Rx, 1Tx channels ���������� ARINC 429 intelligent PC/AT card with ■ Full-size PC/AT card 2 Rx, 2 Tx channels ■ Standard operating temperature: 0°C to +70°C ���������� ARINC 429 intelligent PC/AT card with ■ Relative humidity: 5% to 80% (non-condensed) 4 Rx, 2 Tx channels ���������� ARINC 429 intelligent PC/AT card with ��������� ����! 4 Rx, 4 Tx channels ���������� ARINC 429 intelligent PC/AT card with ■ +5 VDC: 530 mA 8 Rx, 4 Tx channels ■ +12 VDC: 40 mA ■ -12 VDC: 40 mA ����������������� �������������� Bus analysis and simulation software "�������#�3 year limited hardware warranty for Windows Me, 2000, NT, 98 and 95 ������ LabVIEW support for ARINC 429 See our on-line Commercial Products Configuration Guide for available configurations. http://www.condoreng.com TM ©2006 GE Fanuc Embedded Systems. All rights reserved. Printed in the USA. BusTools/ARINC is a 101 W. Anapamu Street, Santa Barbara, CA 93101 trademark of Condor Engineering, Inc. All other trademarks are the property of their respective owners. Specifications may change without notice. CEI-200 4/06 Tel 805.965.8000 Fax 805.963.9630