GE Fanuc Intelligent Platforms AT2-5800 IP Packet Processor Blade & RTM Intelligent High-Performance Dual OCTEON™ IP Packet Processor Blade The AT2-5800, based on two high performance 1000BaseSX, or 1000BaseLX via Small Form Features OCTEON™ Plus multi-core processors, is ideal Factor Pluggable (SFP) transceivers. Interface Support for application services such as 3G/4G Wireless • Supports two intelligent high-performance and IPTV that demand wire-speed IP packet Software Cavium OCTEON™ Plus 16-core CN5860-SCPs processing. By enabling data and control plane The AT2-5800 software implementation is a (Secure Communications Processors) with services in the same form factor, the AT2-5800 comprehensive development package designed up to 750 MHz provides efficient packet processing as well as to improve time-to-revenue. The software • SPI-4.2 Interface for processor interconnection significant performance and cost advantages. development package is optimized to simplify • Up to 8 Gbyte of high-speed DDR2 packet application integration for multi-core processor memory per CN5860 processor The AT2-5800 blade is designed to enable rapid development environments. • 10x1 Gigabit Ethernet (GbE) copper or fiber SFP application development using open, modular, ports via Rear Transition Module (RTM) I/O highly available systems based on AdvancedTCA Intelligent Platform Magement Interface (IPMI) • Up to 16 Mbyte RAM of Persistent Memory architectures. Dual Cavium OCTEON 16-core Designed for high availability applications, • Redundant 1 GbE base interface CN5860-SCP processors @750MHz with 2 Mbyte the AT2-5800 includes an Intelligent Platform • Redundant 10 GbE fabric interface of shared L2 cache memory provide up to Management Controller and firmware subsystem • Designed for NEBS compliance 10 Gbit/s line-speed core processing for network that provides blade management services ® Layers 2-7. With dual 16-core processors, this compliant with IPMI v1.5 or v2.0. This includes PICMG Compliance/Form Factor blade has 32 MIPS64 cores for high-speed blade level parameters, monitoring voltage and • PICMG 3.0 R2.0 ECN002 compliant packet processing. temperature conditions, maintaining system • PICMG 3.1 Option 9 compliant status, and managing hot swap operations. Firmware/Software Support Available To optimize application performance, the • IPMC Management Sub-System CN5860-SCP supports a dual-issue, five-stage At its lowest level, the AT2-5800 software includes ® • Wind River PNE-LE Carrier Grade Linux pipeline and optimized latencies as well as auto a Universal Boot loader (U-Boot) and a compre- Operating System instruction pre-fetching and advanced data pre- hensive Power On Self Test (POST) embedded in • U-Boot, LSP, POST fetching features to minimize memory delays. the firmware. U-Boot loads user application code Product Reliability from the network (e.g. TFTP server) or via local • Telco-grade reliability calculated via Telcordia This packet processor AdvancedTCA blade can Flash memory. SR 332 Issue 1 be configured to enable a wide variety of applica- tions. Up to 16 Gbyte (8 Gbyte per processor) of A Linux Support Package (LSP), Application • Technical support for OEM customers high-speed, low-latency DDR2 memory is imple- Program Interface (API) and sample applica- and resellers mented as packet memory. tion code designed to exercise the AT2-5800 Network Access/Edge Applications are provided to aid in application development. • Session Border Controller (SBC) Rear Transition Module (RTM) I/O The Linux Support Package includes Wind River • Firewall I/O operations are provided through a RTM. For Carrier Grade Linux Operating System (PNE-LE) • Secure Access Gateway application flexibility, the AT2-5800 supports with Cavium Software Development Kit and user • Network Address Translation (NAT) multiple RTM configuration options including any application diagnostics. Other operating systems • Traffic Management combination of up to 10 ports of IEEE 1000BaseT, are available upon request. • Router/Switch AT2-5800 IP Packet Processor Blade & RTM Specifications Block Diagram Processors • Dual OCTEON™ Plus CN5860-SCP, 16-core @750MHz RTM AT2-5800 Packet Processor Blade Memory GbE MAC • Up to 8 Gbyte of DDR2 SDRAM per processor SPI-4.2 Serdes OCTEON Plus Act. • Up to 256 Mbyte Flash memory per processor CN5860-SCP LEDs 16 Cores Front-Panel @ 750 MHz 8 GB DDR2 Flash • x3 Micro-DB9 interfaces GbE SDRAM 128 MB SFP • x2 1Gigabit Ethernet control plane interfaces SFP GbE 16 MB SFP • Status LEDs Switch Persistent GbE FPGA Memory SFP GbE MAC SPI-4.2 SFP Base Interface Serdes GbE • Redundant 1 GbEs (Dual Star) SFP ATCA 10x1 PHY LEDs GbE MAC SFP Fabric Interface XAUI • Redundant 10 GbE XAUIs (Dual Star) OCTEON Plus SFP SPI-4.2 MAC 2-Port CN5860-SCP 10 GbE MMC XAUI SFP RTM I/O Micro 16 Cores DB9 • Line I/O - 10x 1 GbE via SFP connectors @ 750 MHz SFP 8 GB DDR2 Flash • Control plane – 2x 1 GbE via SFP connectors SDRAM 128 MB JTAG SFP Micro PICMG Compliance/Dimensions SFP DB9 IPMC • PICMIG 3.0 • Carrier Management • AMC Management Micro • PICMG 3.1 Option 9 • Voltage Monitoring SFP Power Conversion DB9 Control • Temperature Monitoring • Dual Feed Input -48VDC • 8U single slot AdvancedTCA format Interface • Local 3.3 V and SFP • Height: 12.68 in. (322.25mm) Core Supplies 12 V Payload Power Temperature Sensors LEDs • Depth: 11.0236 in. (280mm) • Blade weight: 7.252 lbs (3.289 Kg) • RTM weight: 1.572 lbs (0.713Kg) Power Requirements • -48 VDC • 200 watts Ordering Information Environmental 85020-204 • Temperature AT2-5800-10G with dual 16-core CN5860_SCP @ 750MHz processors, 4GB DDR2 per processor, 2 control plane - Operating: 0° to +55 °C 1000BaseT SFPs; RoHS 6/6 - Storage -40° to +85 °C 85020-207 • Relative Humidity AT2-5800-RTM-GBE RTM with 10x1000BaseSX SFP ports, 2 control plane 1000BaseT SFPs; RoHS 6/6 - Operating: 5% to 95%, noncondensing - Storage: 5% to 95%, noncondensing Ask your GE Fanuc Intelligent Platforms sales person for additional models. Regulatory Compliance • CE Mark • Emissions - FCC 47CFR Part 15 Class A (USA) - EN55022: 1998/A1:2000/A2:2003 Class A ITE (EU) - EN55024 - VCCI Class A ITE (Canada) About GE Fanuc Intelligent Platforms GE Fanuc Intelligent Platforms is a leading global provider of embedded computing solutions for a - AS/NZ CISPR 22:2002 Class A (Aus. New Zealand) - ICES-003 Issue 3 Class A (Canada) wide range of industries and applications. Our comprehensive product offering includes many types - VCCI Class A ITE of I/O, single board computers, high performance signal processors, fully integrated, rugged systems - EMC Directive 89/366/ECC including flat panel displays, plus high speed networking and communications products. The company • Immunity is headquartered in the U.S. and has design, manufacturing and support offices throughout the world. - EN55024:1998/A1:2001/A2:2003 (EU) Whether you’re looking for one of our standard products or a fully custom solution, GE Fanuc Intelligent - EN ETS 300 386 Platforms has the breadth, experience and 24/7 support to deliver what you need. For more information, • Safety visit www.gefanuc.com. - UL60950-1 (USA) - CSA 22.1 no. 60950-1-03 (Canada)) GE Fanuc Intelligent Platforms Additional Resources - EN 60950-1 (EU) Information Centers • RoHS 2002/95/EC For more information, please visit the GE Fanuc • Designed for NEBS compliance Americas: Intelligent Platforms web site at: 1 800 368 2738 or 1 703 263 1483 www.gefanuc.com Asia Pacific: +81 3 5544 3973 Europe, Middle East and Africa: Germany: +49 821 5034-0 UK: +44 1327 359444 ©2007 GE Fanuc Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 11.07 GFA-1036 Zone 1 Connector Zone 2 Zone 3 Dual IPMB-0 GbE Dual Star Base Interface Connector -48 VDC A & E Power Dual Star Fabric (10 GbE) Control Plans Zone 3 Connector