GE Intelligent Platforms A429-PCI2 ARINC Interface A429-PCI2 interface provides a 16 channel When a channel is setup as a transmitter, you Features highly programmable ARINC interface over can send any number of label sequences on • 16 highly configurable channels with the PCI backplane. Each channel is software each channel. All transmit channels may also concurrent and independent operation. configurable for transmit or receive, high or be synchronized for simultaneous transmis- Each channel selectable for: low speed (100 k or 12.5 k bits per second) sion. Each transmitted ARINC word has an - Transmit or Receive and ARINC 429 or 575 protocol requirements. accompanying control word. The control word - High or Low Speed Any channel may transmit source lists. The implements various error injection capabili- - Receive and/or Bus Monitoring current value table, local monitor and/or ties. You can transmit the words in scheduled • Transmitter global monitor buffers may filter and receive and/or asynchronous priority methods. - Advanced bus scheduling sink data. Either the Label or Label/SDI iden- - Transmission list synchronization tify and sort the ARINC data. The on-board Hardware Overview - Word level error injection DSP controls the flexible data structures, GE Intelligent Platforms bases the A429 inter- • Receiver triggers, interrupts, time stamping and data faces upon high-speed DSP, programmable - Label/SDI current value table communications on the 429 bus. You can use logic and dual port RAM. This advanced design - 48-bit 1 μsec time stamp external triggers for synchronization. The delivers a highly reliable hardware platform - Error detection advanced interrupt technology allows real- that is feature rich and user friendly. The 256 - IRIG B option time event handling by the host processor. kB of dual port RAM allows the host system to • Bus Monitor access setup, receive, monitor, transmit and - Filterable sequential buffer As it receives each 32-bit ARINC 429 data, change data structures, at any time. Definable - Link-list buffer chains a 48-bit, 1 μsec time tag time stamps the transmission and receive structures include - 48-bit 1 μsec time stamp data word. When placing the receive chan- link list and buffer length sizes. This allows the - Error detection nel in the monitor mode, a 16-bit status word user to design the data structure optimal for - External trigger initiation accompanies the time stamped data. This the specific application while maintaining an • Architecture provides error information regarding each easy to use environment. - Host off-loading dsp received word. - Large, flexible memory - Label and SDI operations - System event interrupts • Software Support - Complimentary drivers for most operating systems - Integrated Avionics Library,including source code A429-PCI2 ARINC Interface Self Test Interface Card Specifications Specifications • Power-up test with status register report • Maximum power consumption with 400 ohm • BIT-DSP and encoder/decoder test transmit loads: 5 V @ 800 mA, +12 V @ 520 mA, A429 Functionality: Transmitter Function - 12 V @ 470 mA • Independent channel operations • Run-time health status register • Standard commercial temperature: 0°C to +60°C; • Major/Minor frame scheduling • Loop back Unit Test application ≤ 95% rH non-condensing • Priority asynchronous message insertion Inputs/Outputs • Mechanical: Approximately 3/4 length PCI bus card • Transmission link buffers • External triggers 7.9” x 3.9” (201 mm x 99 mm) • Synchronous word transmission • External timer clock • On-the-fly transmission list Software and Documentation Support • External timer enable • Error injection • Low-level drivers for most operating systems • IRIG clock input (optional) • Programmable interword gap • Integrated Avionics Library with source code ® • 100 kHz or 12.5 kHz transmission speed PCI Functionality • Borland and Microsoft C Compiler compatible • PCI bus is 2.1 compliant • Hardware and Integrated Avionics Library docu- Receiver Function • 50 MB per second maximum transfer rate mentation included on CD. Hard copies of the • Current buffer value • 16-bit and 32-bit transfer modes documentation are available upon request. • Time stamped received labels • Programmable DMA controller • SDI and Label differentiation Customer Support • On-board firmware storage via Flash memory • Label filter functions • Two-year warranty • Messages time stamped with 1 μsec 32-bit clock or Interface Connections • Extended warranties available optional 48-bit IRIG-B clock • AMP .050 Series 100-pin connector • Driver and library upgrades • Multiple triggers and interrupts • Error detection Configurations Monitor • Channel sequential monitor • Global sequential monitor Model Number Configuration • Buffer swap notification • Variable length buffers A429-PCI2-16 Sixteen Channel ARINC to PCI interface • Count detection triggers /I IRIG B Time Receiver (add /I to product number) About GE Intelligent Platforms GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology company and a global provider of hardware, software, services, and expertise in automation and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit www.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 01.10 GFA-1361