Industrial Trading chervon right Manufacturers chervon right G chervon right GE FANUC chervon right V5C-N128-700
About product Specifications Features Datasheet FAQ

GE FANUC V5C-N128-700

Image of GE FANUC V5C-N128-700

Description

Ge/Fanuc V5C-N128-700 CPU Board - 6U VMEBus Embedded PC with Dual Ethernet

Part Number

V5C-N128-700

Price

Request Quote

Manufacturer

GE FANUC

Lead Time

Request Quote

Category

Single Board Computers

Specifications

Disk Interfaces

Integrated floppy disk controller for one or two 1.44 MB 3.5-in. floppy disk drives through rear P2

Enhanced IDE Drive

Bus mastering EIDE interface through P2, IDE supports two IDE drives with enhanced PIO access modes

Ethernet

Two Intel 82559ER Ethernet Controllers with integrated PHY IEEE 802.3-compatible Dual front-panel RJ-45 connectors

Fast SCSI-2 Interface

Symbios 53C875E SCSI processor Fast SCSI-2 device support in asynchronous or synchronous mode

Humidity

10 to 95% relative humidity, non-condensing

Level 2 Cache

L2 cache (integration with CPU dependent on processor option)

On-Board CompactFlash Slot

On-board CompactFlash drive slot, compatible with standard

Operating Shock

6G maximum

Operating Temperature

0° to 55° C, inlet air

PCI Bus

Ali ALADDiN-Pro 2 1543C North Bridge Controller, 32-bit 33 MHz PCI local bus

PMC Expansion Slots

High-density PMC expansion connector Triple PMC Carrier Card (TPMCC), 32-bit/33 MHz PCI interface

Power Requirements

+5 VDC @ 5A with 256 MB at 566 MHz (typical) +12 VDC @ 100mA maximum (CPU and memory dependent) -12 VDC @ (dependent on PMC modules installed)

Processor - Socket 370

Scalable processing power with flexible processor design Pentium III with up to 1000 MHz and 100 MHz FSB

Serial Interface

Ali Aladdin-Pro 2 1543C Super I/O Controller

Storage Shock

10G maximum

Storage Temperature

-40° to 85° C

SVGA Video

69030 Dual HiGVideo accelerator, 4 MB Embedded SDRAM memory

System Memory

256 MB SDRAM on-board memory (default) 256 MB and 512 MB options, 128 MB to 512 MB with soldered chips, SODIMM Expansion socket for memory upgrade to 1 GB

VME Bus

Tundra Universe II VMEbus interface controller

Features

Datasheet

pdf file

Ge fanuc-V5C-N128-700-datasheet1-1196740316.pdf

582 KiB

Extracted Text

V5C 6U VMEBus Embedded PC with Dual Ethernet Features • Compatible with PC99 Design Specification • Socket 370 Processor ® Pentium III (to 1000 MHz* w/100MHz Front Side Bus) ® or Celeron (to 600 MHz* w/66 MHz Front Side Bus) • Memory sizes up to 1 GB • Level 2 cache on CPU • 4 MB 69030 Video RAM • Dual 10/100Base TX Ethernet • Fast SCSI-2 interface with Wide option • Enhanced IDE Hard Disk interface and option for 2nd IDE • USB, COM1, COM2, LPT1, V5C is a high-performance single board embedded computer for the VMEbus. It Mouse and keyboard port ® ® can be configured with either a Pentium III or Celeron processor. The architecture • PCI Expansion interface for is designed around the PCI local bus. The V5C is designed for real-world Triple PMC Carrier Card performance with advanced memory technologies, processing speeds up to (TPMCC) 1000 MHz, SVGA GUI-Accelerated PCI Bus video, Fast SCSI 2/wide, Dual High Speed 10/100BaseT Ethernet and VMEbus VME64 Block Mode Transfer capability. • VME64-compliant with This results in high-end workstation performance in a single-slot VMEbus card. Universe II PCI to VMEbus interface w/5-row P1/P2 The V5C Embedded PC is compatible with software that complies with the PC99 Design Guide, so it supports the wide variety of off-the-shelf software available for • 32 KB NVSRAM with Auto- Pentium-base computers. SBS Technologies provides driver-level support for several Store ® common operating systems including Linux, and Windows NT , as well as real-time ® • VMEbus hardware- operating systems such as QNX Systems Limited QNX , and Wind River Systems ® controlled byte swapping. VxWorks . • Compact Flash Disk on The V5C features new architecture based on the high-speed PCI bus. As a result, second IDE peripherals such as video and Ethernet, as well as the VME interface have a high- bandwidth connection to the processor. The V5C is designed to provide all the • Flash Disk-On-Chip features of a complete PC99-compatible motherboard (excluding audio), along with * Up to currently available additional features such as dual Ethernet Controllers, SCSI-2 and hardware processor speeds extensions necessary for VMEbus Master/Slave capability. The V5C implements the ® (consistent with product advanced third-generation ALI Aladdin-Pro II chipset that is fully compatible with power requirements). industry-standard PC hardware and software. For a fast and flexible interface to the ® VMEbus, the V5C uses the Tundra Universe II VMEbus Interface Controller. Single Board Computers Specifications PMC Expansion Slots • High-density PMC expansion connector • Triple PMC Carrier Card (TPMCC) • 32-bit/33 MHz PCI interface Processor - Socket 370 • Fully PCI-compliant PMV for embedded systems • Scalable processing power with flexible processor design • Isolation and software access to PMC modules through PCI • Pentium III with up to 1000 MHz and 100 MHz FSB bridge chip on TPMCC • Celeron with up to 600 MHz and 66 MHz FSB • Concurrent PCI bus transactions for primary and secondary * Up to currently available processor speeds (consistent with PCI buses product power requirements). VME Bus Level 2 Cache • Tundra Universe II™ VMEbus interface controller • L2 cache (integration with CPU dependent on processor • Programmable byte-swapping capability to integrate to 6800- option) configured VMEbus ® ® ® • Support for Intel 32, Motorola 32, and Intel 16 byte- System Memory swapping modes • 256 MB SDRAM on-board memory (default) • Configuration: DTB Master, Option A32/A24/A16, • 256 MB and 512 MB options D32/D16/D08(E0), RMV • 128 MB to 512 MB with soldered chips • Configuration: DTB Slave, Option A32/A24/A16, D32/D16/D08, • SODIMM Expansion socket for memory upgrade to 1 GB RMV • Interrupter: Programmable, 1 of 7 SVGA Video • Interrupt Handler: Programmable, 1H(1–7) • 69030 Dual HiGVideo™ accelerator • Requester: Programmable, BR(3, 2, 1, 0) Option ROR and • 4 MB Embedded SDRAM memory RWD • VGA and SVGA-compatible • Arbiter: RRS, PRL, SGL • 1600 x 1200 screen resolution (max.) • Block Mode Transfer: Master and slave BLT and MBLT • Low power D64/D32/D16 • Disk interfaces provided onVME P2 connector Disk Interfaces • Extended VME signals on VME P2 (row B) • Integrated floppy disk controller for one or two 1.44 MB 3.5-in. • Floppy, IDE, and SCSI signals on VME P2 (row A and C) floppy disk drives through rear P2 • SCSI Wide, Secondary IDE, and second USB on VME P2 • IDE interface supporting two IDE drives (row D and Z) • Fast SCSI-2 interface through P2 Serial Interface Enhanced IDE Drive ® • Ali Aladdin-Pro 2 1543C Super I/O Controller • Bus mastering EIDE interface through P2 • Dual serial port interfaces: COM1—RS-232, • IDE supports two IDE drives with enhanced PIO access COM2—RS-232/422/485 modes ® • IBM PC compatibility • Secondary IDE supports on-board CompactFlash™ disk or • Signals:TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI IDE drives through VME P2 • Front-panel DB9 connector for each port On-Board CompactFlash™ Slot Parallel Interface • On-board CompactFlash drive slot, compatible with standard ® • Ali Aladdin-Pro 2 1543C Super I/O Controller units such as SanDisk™ CompactFlash • Single parallel port (LPT1) • Centronics parallel, PS/2bi-directional compatibility Fast SCSI-2 Interface ® • Buffered parallel interface • Symbios 53C875E SCSI processor • Micro-miniature DB-25 front-panel connector • Fast SCSI-2 device support in asynchronous or synchronous mode Mouse/Keyboard Interface • Data rates up to 20 MB/s in synchronous mode ® • Ali Aladdin-Pro 2 1543C Super I/O Controller • Wide SCSI data rates of 40 MB/s in synchronous mode ® • Microsoft mouse and PS/2-style keyboard compatibility • Active SCSI terminators provided on-board to simplify SCSI • Mouse and keyboard resident in a single connector, with chain termination reverse IBM standard (keyboard default, mouse through adapter) Ethernet ® • Mini-DIN “Y” adapter cable provided • Two Intel 82559ER Ethernet Controllers with integrated PHY • Mini-DIN circular 6-pin front-panel connector • IEEE 802.3-compatible • Dual front-panel RJ-45 connectors USB Interfaces ® • Ali Aladdin-Pro 2 1543C Super I/O Controller PCI Bus ® • USB0 routed to standard USB connector on front panel • Ali ALADDiN-Pro 2 1543C North Bridge Controller • USB1 routed to P2 expansion • 32-bit 33 MHz PCI local bus Ordering Information Power Requirements • +5 VDC @ 5A with 256 MB at 566 MHz (typical) • +12 VDC @ 100mA maximum (CPU and memory V5C Embedded PC dependent) • -12 VDC @ (dependent on PMC modules installed) V5C XXXX - YY - Z XXXX = Memory (contact SBS for memory capacities Physical Characteristics • 160 mm x 233 mm (dual Eurocard) 6U x 4HP available) • Multi-layer printed circuit, FR-4 YYY = CPU speed in MHz (contact SBS for CPU speeds available) • 94 V-0 flammability rating (UL recognized manufacturers) Z = Front-panel option (contact SBS for availability, please specify if V5B compatibility is required). Temperature • Operating: 0° to 55° C, inlet air • Storage: -40° to 85° C Options and Accessories TPMCC Single-slot PCI mezzanine carrier card on Cooling PCI bus 1 • 100 LFM forced air, minimum required for cooling VME-TB21 P2 adapter for floppy and IDE/SCSI cabling Humidity CA25P24 24-in. 25-pin Micro-D parallel cable • 10 to 95% relative humidity, non-condensing assembly FDOCk-XX Flash Disk-On-Chip up to 144 MB Shock VME-62XX IDE hard disk, 3.5-in. floppy (contact SBS • Operating: 6G maximum for capacities available) VME-TB51 5-row DIN enhancements • Storage: 10G maximum COMFLASH-XXX Compact Flash Programmable Board Configuration Software Options • Configuration set by firmware (reduces need for jumpers) • Software configuration options set by embedded set-up Windows NT Microsoft Windows NT Windows 2000 Microsoft Windows 2000 utility or application software Windows XP Microsoft Windows XP • Reliable and easy board setup (usually without having to remove board from chassis) UNISDK-NT Universe Software Developers Kit / NT UNISDK-XP Universe Software Developers Kit / XP UNISDK-Linux Universe Software Developers Kit / Linux Support ® • Software support packages available for Linux , Windows VxWSP-V5C VxWorks Board Support Package ® ® ® ® V5C-SDK-XP V5C Software Developers Kit NT , Windows 2000 , QNX , and VxWorks V5C-BSP-NT V5C Board Support Package VMEbus P2 5-Row VMEbus P2 5-Row P2 Expansion Byte Swapping PCI Bus SMI Control ISA Bus V5C Block Diagram ThermTrip Shutdown CPLD 3.3V Socket 370 Switching +5V GTL Pentium III Power Supply CPU Dual Termination +5V Celeron Power Voltage ID (VID) Thermal Cont. DPMCC Clock Max TPMCC Generator 1536 PMC0xx SDRAM ALI 1621 256MB (default) North 512MB (max.) Bridge Bank 2,3, VMEbus SDRAM Interface 256MB (default) 512MB (max.) Bank 0,1, 69030 SCSI SYMBIOS Video Video 53C875E Wide 10/100 Ethernet Enet Controller BaseT 8-bit 10/100 Ethernet Enet BaseT Controller 16-bit Kbd/Mse USB1 SLI 1543C Keyboard/Mouse South Bridge Interface Compact SM Bus Flash Disk CD ROM IDE USB0 Primary IDE IDE Floppy COM1 Flash COM2 BIOS Flash CPLD LTP1 DOC OverTemp Alert NVSRAM 32 KB Corporate Headquarters European Headquarters 2400 Louisiana Blvd. NE, #5-600 Memminger Str. 14 Albuquerque, NM 87110-4316 D-86159 Augsburg, Germany Tel 505.875.0600 Fax 505.875.0400 Tel +49-821-5034-0 Fax +49-821-5034-119 Email info@sbs.com Email aug-info@sbs.com For additional contact information, please visit our web site at www.sbs.com Specifications subject to change without notice. All trademarks and logos are property of their respective owners. ©2004 SBS Technologies, Inc. 20040510

Frequently asked questions

How does Industrial Trading differ from its competitors?

chervon down
Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Is there a warranty for the V5C-N128-700?

chervon down
The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carrier will Industrial Trading use to ship my parts?

chervon down
We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Can I buy parts from Industrial Trading if I am outside the USA?

chervon down
Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Which payment methods does Industrial Trading accept?

chervon down
Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

GE Fanuc VME-5588-000 DMA Reflective Memory Module

GE Fanuc/VMIC VMIPCI-5588-201 CPU Board. High-Speed Fiber-Optic 1.2 Gbaud Reflective Memory with Int...