EVOC PCI-192DIO(B)
Specifications
Board ID Setup Function
4-bit
Clock Input Method
Internal input or external input
Counter Type
Count-down
Digital I/O Channel
192-channel (please refer to the multiplexing description table for some connectors)
Digital I/O Compatibility
Compatible with TTL
External Dimensions (L x H)
175mm x 106mm
I/O Port Type
Onboard SCSI-200 input/output connector, which can realize 192-channel I/O isolation input and output via matching terminal board
Input Signal
V - 2.0V, V - 0.8V IH(MIN) IL(MAX)
Interrupt Function
External event trigger, mode match, status change
Max. Input Frequency
20MHz
Operating Temperature
0C ~ +60C
Output Signal
V - 4.5V @12mA, V - 0.55V OH(MIN) OL(MAX)
Power Consumption
Typical - +5V @600mA; Max - +5V @2.3A
Programmable Timer/Counter Channel
Independent 6-channel
PWM Output Channel
6-channel
Relative Humidity
5% ~ 85% RH, non-condensing
Resolution
Step Length - 1µs, error - ±10ns
Step Length
1ms, Error
Storage Humidity
5% ~ 95%, non-condensing
Storage Temperature
-20C ~ +70C
Timer/Counter Bit
16-bit
Timer/Counter Compatibility
Compatible with TTL
Features
- 4-bit Board ID setup function
- Onboard SCSI-200 input/output connector, which can realize 192-channel I/O isolation input and output via matching terminal board
- Operating Temperature: 0°C~+60°C
- Power Consumption: Typical: +5V @600mA; Max: +5V @2.3A
- Relative Humidity: 5%~85% RH, non-condensing
- Storage Temperature: -20°C~+70°C
- Storage: 5%~95%, non-condensing
Datasheet
Extracted Text
Data Acquisition Boards Data Acquisition Boards PCI-192DIO(B) emulates eight 8255 PPI mode 0; 192-channel TTL digital I/O port; six independent 16-bit High-speed digital I/O card, 32-channel high-speed DIO, 8-channel general DIO, speed up to 80M Bytes/sec. programmable timer/counter; 6-channel PWM output; multiple interrupt function ensures quick-response of It adopts DMA bus for transmitting, 32/16/8-bit mode with start and stop function; it also provides mode PCI-192DIO(B) PCI-32DIOF system matching, status change and timer interrupt function Specifications and Features Specifications and Features Programmable Timer/Counter Function Digital I/O Channel Termination Resistor on Digital Input/Output Channel: Independent 6-channel Channel: 192-channel (please refer to the multiplexing Termination resistor: 110Ù; termination voltage: 2.9V Data Width: 32/16/8 bits, software programmable description table for some connectors) Bit: 16-bit V =2.0V, V =0.8V Transmitting Mode: Supports Scatter/Gather DMA IH(MIN) IL(MAX) Compatibility: Compatible with TTL Counter Type: Count-down Channel: 32-channel Input Signal: V =2.0V, V =0.8V Clock Input Method: Internal input or external input IH(MIN) IL(MAX) Input Level: V =2.0V, V =0.8V IH(MIN) IL(MAX) Max. Input Frequency: 20MHz Output Signal: V =4.5V @12mA, V =0.55V OH(MIN) OL(MAX) Output Level: V =4.5V @24mA, V =0.55V OH(MIN) OL(MAX) Output Statas Read-back Compatibility: Compatible with TTL Interrupt Function: External event trigger, mode match, Combination Method: 16DI16DO (default), 32DI, 32DO, Signal Generator: Enabled: Repeat output of data inside FIFO status change DI16DO8, DI8DO16, DI8DO8; Not Enabled: no repeat output of data inside FIFO PWM Output: Step Length = 1ms, Error=±10ns Data Throughput: 80M bytes/sec; 32-bit input @20MHz Channel: 6-channel High Level Cycle: (1~65535) x step length 120M bytes/sec; 32-bit input @30MHz external trigger Resolution: Step Length = 1µs, error=±10ns Low Level Cycle: (1~65535) x step length (when data length is smaller than FIFO size) General Digital I/O Port FIFO: 64K Channel: 8-channel General Specifications Interrupt Method: Input: Mode matching interrupt, status Input Level: V =2.0V, V =0.8V IH(MIN) IL(MAX) change interrupt, FIFO full interrupt and overflow interrupt I/O Port Type: Onboard SCSI-200 input/output connector, which can realize 192-channel I/O isolation Output Level: V =4.5V @24mA, V =0.55V OH(MIN) OL(MAX) Signal Source: Internal clock source (20MHz, 10MHz), timer 0 input and output via matching terminal board output, timer 1 output, external clock (up to 30MHz), External Dimensions (L x H): 175mm x 106mm and handshake control 1 1 4-bit Board ID setup function Programmable Timer/Counter: Full-Size/Half-Size After system hot-start,16-channel default input, Full-Size/Half-Size Slot CPU Cards Slot CPU Cards Power Consumption: Typical: +5V @600mA; Max: +5V @2.3A Reference Clock: 10MHz input high-level; 16-channel default output, output low-level Operating Temperature: 0°C~+60°C Bit: 16-bit; When 32-channel is total input or output: the decreasing order Storage Temperature: -20°C~+70°C Timer 0: Used as the signal source of digital input is D, C, B, A Relative Humidity: 5%~85% RH, non-condensing Timer 1: Used as the signal source of digital output 2 Input Load: Termination resistor off 2 Storage: 5%~95%, non-condensing Timer 2: Interrupt source SBC/Motherboard/ SBC/Motherboard/ V =2.0V, V =0.8V IH(MIN) IL(MAX) Modules Modules Ordering Information Part Number Model Number Description Coming soon PCI-192DIO(B) 192-channel TTL, PCI data I/O acquisition card 3 3 Embedded Embedded 0060-003530 PCLD-8750 SCSI-100 port industrial terminal board Box PC Box PC General Specifications One SCSI-100 connector used as input/output of the port, matching PCLD-8750 16-channel opto-isolated digital input channel; 16-channel controlled relay output channel; 2-channel isolated 4-bit Board ID setup function 4 4 PCI-16P16R(B) PWM output Network Application Network Application External Dimensions (L x H): 175mm x 106mm (6.9" x 4.2") Computers Computers Power Consumption: Typical: +5 V @ 830mA/termination resistor off; +5 V @ 1000mA/termination resistor on Max: +5V @1000mA Specifications and Features Operating Temperature: 0 ~60 Storage Temperature: -20 ~70 5 Isolated PWM Output 5 Isolated Digital Input Industrial PC Industrial PC Relative Humidity: Operating: 5%~85%, non-condensing Isolated PWM Output Channel: 2-channel Isolated Input Channel: Isolated 16-channel Storage: 5%~95%, non-condensing Output Voltage: 0V~0.8V (low-level), 5±0.5V (high-level) Interrupt Input Channel: IDI0~IDI15 Resolution: Step length= 100 µs ± 10µs Input Voltage: 0V~1.7V (low-level), 5V~24V (high-level) High Level Cycle: (1~65535) x step length Data Throughput: 0~1KHz (with RC filter), 0~10KHz 6 6 Low Level Cycle: (1~65535) x step length (without RC filter) HMI HMI High-voltage Isolation: 2500V Voltage Isolation: 2500 V DC DC ESD (electrostatic discharge) Protection: 2000V Ordering Information Relay Output Relay Output Channel: 16-channel; it has on-off LED for each Part Number Model Number Description 7 7 channel EVOC Rugged EVOC Rugged 0060-003320 PCI-32DIOF High-speed digital I/O card, 32-channel high-speed DIO, 8-channel general DIO, speed up to Series Series Output Type: CH0~CH4, CH8~CH12: constant on and constant 80M Bytes/se c. It adopts DMA bus for transmitting, 32/16/8-bit mode with start and stop function; off output CH5~CH7, CH13~CH15: constant on output it also provides mode matching, status change and timer interrupt function Rated Switch Voltage/Current: 0.5A/125V , 1A/24V AC DC 8 0060-000590 PCLD-8750 SCSI-100 port industrial terminal board 8 MCC Series Contact Resistance: 1000MÙ min. (open), 0.1Ù max. (short) MCC Series 0080-000980 PCL-202100-1M SCSI-100 to SCSI-100 converter cable (special twisted-pair, shield) Relay Response Time: Operate time 10ms (max.); Release time 5ms (max.) General Specifications 9 9 Chassis Chassis 4-bit Board ID setup function PCI2.1 specification compliant Power Consumption: External power supply 3W (+5V @ 600mA); non-external power supply 4.5W (+5V@600mA; +12V @120mA) External Dimensions (L x H): 175mm x 106mm (6.9" x 4.2") 10 10 Operating Temperature: 0°C~60°C Data Acquisition Data Acquisition Storage Temperature: -20°C~70°C Boards & Modules Boards & Modules Relative Humidity: 5%~95% RH, (IEC 68-2-3), non-condensing Ordering Information 11 11 Accessories Accessories Part Number Model Number Description 0060-002490 PCI-16P16R(B) 16-channel opto-isolated digital input channel; 16-channel controlled relay output channel; 2-channel isolated PWM output 0060-001900 PCLD-880 DB-37 port industrial terminal board 10-05 10-06 The images are for reference only, and all product specifications are subject to change without notice. The images are for reference only, and all product specifications are subject to change without notice.
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the PCI-192DIO(B)?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Evoc ARK-8018DHI - A 16 bit, 8 Channel differential analog input (with a direct link available to th...

Evoc ARK-8520CFI isolated RS-232 and RS-485/RS-422 converter, automatically adjust baud rate; extern...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods