CPC-1712CLD3NA - EVOC - Industrial Trading

Description

Intel Pentium M CompactPCI Boards with VGA/LVDS/CF/3GbE/Audio

Part Number

CPC-1712CLD3NA

Price

Request Quote

Manufacturer

EVOC

Lead Time

Request Quote

Category

Single Board Computers

Specifications

Form Factor

PICMG

Ethernet Chipset

Intel 82541
CPC-1712CLD3NA - 1 x Intel® 82541PI GbE Controller(PCI),1 x Intel® 82546GB dual port GbEController(PCI-X); CPC-RP702 - N/A

System Chipset

Intel 855GME
Intel® 855GME + 6300ESB

Video Chipset

Intel 855GME

Audio

CPC-1712CLD3NA - N/A; CPC-RP702 - Onboard 1 x Realtek ALC655, supporting AC´97

Board Type

CompactPCI 6U

CPC-1712CLD3NA - 1 x CompactFlash socket; CPC-RP702 - N/A

Dimensions

CPC-1712CLD3NA - 233mm(6U) x 160mm(D) x4HP(1-slot width); CPC-RP702 - 233mm(6U) x 80mm(D) x 4HP(1-slot width)

Display Chipset

Intel 855GME integrated 2D/3D graphics controller

Display Memory

Up to 64MB shared system memory

Display port

CPC-1712CLD3NA - 1 x VGA; CPC-RP702 - 1 x VGA, 1 x LVDS(LCD for option)

Embedded OS

Linux

Hardware Monitor

Monitors system status, voltage, temperature and fan speed etc.

IDE

CPC-1712CLD3NA - N/A; CPC-RP702 - 1 x 44-pin Ultra ATA100 interface

KB/MS

CPC-1712CLD3NA - 1 x PS/2; CPC-RP702 - 1 x PS/2(KB/MS) port

Operating Humidity

5%-95%, non-condensing

Operating Temperature

-40C ~ 60C

Parallel Port

CPC-1712CLD3NA - N/A; CPC-RP702 - 1 x 26-pin parallel interface

PMC

CPC-1712CLD3NA - 1 x 64-bit PMC; CPC-RP702 - N/A

Power Consumption

Typical 39W(CPU - Onboard Pentium® M 1.8GHz, System Memory - Onboard 1G DDR ECC)

Power Supply

Supports CPCI and ATX power supply

Processor

Intel Pentium m 1.8G
Onboard Intel® Pentium® M 1.8G embedded processor, with 2M cache and 400MHz FSB

Resolution

VGA mode up to 1600 x1200 @85Hz or 2048 x1536@75Hz; Supports 12-bit/18-bit or dual 12-bit LVDS display interface

Serial ATA

CPC-1712CLD3NA - Onboard 1 x 2.5² SATA hard disk interface(15-pin power supply and 7-pin signal connector); CPC-RP702 - 1 x Serial ATA150MB/s interface

Serial Port

CPC-1712CLD3NA - 1 x RS232(RJ45 port);

Standard

64-bit CompactPCI expansion bus. Compliant with PICMG2.0 R3.0, PICMG2.1 R2.0, PICMG2.3 R1.0, PICMG2.5(R1.0 H.110), PICMG2.11 R1.0, PICMG2.16, PICMG2.9, IPVMI 2.0

Storage Temperature

-45C ~ 80C

System Memory

Onboard 1GB DDR 333 ECC memory, supporting up to 2GB of DDR ECC system memory

USB

CPC-1712CLD3NA - 2 x USB2.0 port; CPC-RP702 - 2 x USB2.0 port

Watchdog Timer

1~255 sec./min. timer system reset or interrupt, setup by software

Windows OS

Windows 2000/Windows XP

Features

Onboard 1GB DDR 333 ECC system memory
Onboard Intel® Pentium® M 1.8G processor
PICMG 2.0 R3.0 CompactPCI specification compliant
PICMG 2.1 R2.0 Hot Swap specification compliant
PICMG 2.16 Packet Switching specification compliant
PICMG 2.5 R1.0 H.110 CompactPCI Computer Telephony Specification compliant
Selectable 6U rear I/O board: CPC-RP702
Supports 3 x Intel® 10/100M/1000Mbps Ethernet Interface
Supports CRT + LVDS dual independent display

Datasheet

EVOC-CPC-1712CLD3NA-datasheet.pdf

1202 KiB

Download

Extracted Text

CPCI Platforms CPCI Platforms 6U CompactPCI Boards 6U CompactPCI Boards Board Diagram Dimensions CPC-1712CLD3NA Intel® Pentuim® M CompactPCI Boards with VGA/LVDS/CF/3GbE/Audio Intel Pentium M â â 1.8GHz Embedded 64-bit PMC processor 400MHz FSB VGA (DB15 ) Onboard 1GB DDR2 400 GMCH LVDS DDR2 333 RECC system memory 855GME (Up to 2GB) KB/MS USB1-2 Intelâ RJ45 UDMA/100 CF Socket 33MHz PCI Bus (LAN1) 8245PI USB2.0 USB 1-2 6300ESB USB 3-4 HANCERAPID 66MHz PCI-X Bus PLX6540 J1/J2 689 BGA LAN1 USB2.0 COM1 VGA SATA1 J3/J5 Intelâ PMC (64bit) SATA2 82546GB MDC FWH LPC Bus 1 BMC 1 Full-Size/Half-Size Full-Size/Half-Size Slot CPU Cards Slot CPU Cards J3/J5 Super I/O 2 2 Hardware Keyboard COM1 COM2 LPT Monitor Mouse SBC/Motherboard/ SBC/Motherboard/ Modules Modules CF socket 3 Features 3 Embedded Embedded Box PC Wide Box PC Onboard Intel® Pentium® M 1.8G processor 0C Memory Available Accessories On Board Onboard 1GB DDR 333 ECC system memory Temperature 2.16 Supports 3 x Intel® 10/100M/1000Mbps Ethernet Interface Name Description Qty. Part Number Supports CRT + LVDS dual independent display SERIAL 4 4 PICMG 2.16 Packet Switching specification compliant 1 2192-006231 Driver CD/Protective film/RoHS CPC-1712CLD3NA/VER:A1 Network Application Network Application 4 0 0 Computers Computers PICMG 2.5 R1.0 H.110 CompactPCI Computer Telephony Specification compliant 4 2330-000011 Jumper/SHINNING/ROHS Pitch: 2.0mm, black, sealed tail PICMG 2.1 R2.0 Hot Swap specification compliant 2 2330-000041 Jumper/RoHS 2.54mm pitch, blue PICMG 2.0 R3.0 CompactPCI specification compliant Selectable 6U rear I/O board: CPC-RP702 1 2360-005031 KM cable/RoHS One Mini-DIN port to two PS/2 ports, length: 250mm/RoHS 5 5 Industrial PC Industrial PC 1 2360-005711 COM conversion cable/ROHS RJ45 to COM(male), length: 550 Specifications 1 2412-000331 Setup Guide/RoHS AMI/BIOS Setup Guide (for Core/8)/VER:A1 System Display 1 2413-013521 User Manual/Chinese/RoHS CPC-1712CLD3NA/VER:A2 Intel® 855GME integrated 2D/3D graphics controller Chipset Processor Onboard Intel® Pentium® M 1.8G embedded processor, with 2M cache and 6 6 4 2391-004681 Copper hex Screws/RoHS M3 x 6-4/CH-M3-6-4-Ni Memory Up to 64MB shared system memory HMI 400MHz FSB HMI 4 Resolution VGA mode up to 1600 x1200 @85Hz or 2391-000391 Screw/RoHS Pan head M3 x 5/GB-T818-1985/nickel plating Chipset Intel® 855GME + 6300ESB 2048 x1536@75Hz Memory Onboard 1GB DDR 333 ECC memory, supporting up to 2GB of DDR ECC Supports 12-bit/18-bit or dual 12-bit LVDS display system memory interface Hardware Monitor Monitors system status, voltage, temperature and fan speed etc. Related Product 7 7 EVOC Rugged Dual Display Supports CRT + LVDS dual independent display EVOC Rugged Watchdog Timer 1~255 sec./min. timer system reset or interrupt, setup by software Series Series Item Typical Recommendation Standard 64-bit CompactPCI expansion bus. Compliant with PICMG2.0 R3.0, Mechanical and Environmental PICMG2.1 R2.0, PICMG2.3 R1.0, PICMG2.5(R1.0 H.110), PICMG2.11 Dimensions CPC-1712CLD3NA: 233mm(6U) x 160mm(D) x CPCI Chassis CPC-8202, CPC-8203, CPC-8402, CPC-8403, CPC-8404 R1.0, PICMG2.16, PICMG2.9, IPVMI 2.0 4HP(1-slot width) Rear I/O Board CPC-RP702 8 Storage Interface 8 CPC-RP702: 233mm(6U) x 80mm(D) x 4HP(1-slot MCC Series MCC Series width) CPC-1712CLD3NA CPC-RP702 Operating Temperature -40 ~60 Serial ATA 1 x Serial ATA150MB/s interface Onboard 1 x 2.5² SATA hard disk Storage Temperature -45 ~80 interface(15-pin power supply and 7- Ordering Information Operating Humidity 5%-95%, non-condensing pin signal connector) 9 9 IDE Part Number Model Number 1 x 44-pin Ultra ATA100 interface Power Description N/A Chassis Chassis CF N/A Power Supply Supports CPCI and ATX power supply 1 x CompactFlash socket 0030-003250 CPC-1712CLD3NA (YF) Motherboard Power Consumption Typical 39W(CPU: Onboard Pentium® M 1.8GHz , I/O Interface 0030-007480 CPC-1712CV2N/1.6G/conformal coating Motherboard System Memory: Onboard 1G DDR ECC ) USB 2 x USB2.0 port 2 x USB2.0 port Operating System 0030-007640 CPC-1712CLD3NA/conformal coating Motherboard 10 10 Serial Port 1 x RS232(RJ45 port) 1 x RS232/422/485 (DB9 port) Windows OS Windows 2000/Windows XP Data Acquisition Data Acquisition 0030-010080 CPC-1712CLD3NA/no CF card Motherboard Parallel Port N/A 1 x 26-pin parallel interface Boards & Modules Boards & Modules Embedded OS Linux PMC 1 x 64-bit PMC N/A 0030-014210 CPC-1712CLD3NA-B Motherboard Display Port 1 x VGA 1 x VGA, 1 x LVDS(LCD for option) 0030-014220 CPC-1712CLD3NA-B/no CF card Motherboard Audio N/A Onboard 1 x Realtek ALC655, supporting 11 11 AC'97 0060-001370 CPC-RP702 Rear I/O Board Accessories Accessories KB/MS 1 x PS/2 1 x PS/2(KB/MS) port 0060-002060 CPC-RP702/conformal coating Rear I/O Board Ethernet Chipset 1 x Intel® 82541PI GbE Controller(PCI), N/A 1 x Intel® 82546GB dual port GbE Controller(PCI-X) Connector 1 x RJ45 port(Intel® 82541PI) 2 x RJ45 Giga port(Intel® 82546GB) 2-199 2-200 The images are for reference only, and all product specifications are subject to change without notice. The images are for reference only, and all product specifications are subject to change without notice.

Frequently asked questions

Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products