Data Acquisition Boards Data Acquisition Boards 8-channel high-speed RS232 serial port card; its serial port channel 1 and 2 can be set-up as RS232, RS422 8-bit opto-isolated digital input/output, 16-channel TTL digital input/output card PCI-8COM /PCI-8COM(B) 104P-HI24IO or RS485 mode via jumpers Specifications and Features Specifications and Features Isolated Digital Output Isolated Digital Input Three modes for flow control: No; Hardware (RTS/CTS) and Software (Xon/Xoff) Isolated Output Channel: 8-channel Isolated Input Channel: 8-channel The communicating method of serial port1 and 2 can be set up via jumpers Supply Voltage: 5V~40V (external) Interrupt Input Channel: IDI0~IDI7 DC ESD Protection: ±15KV DC Output Current: 200mA (max.)/channel Input Voltage: 0V~2V (low-level), 5V~30V (high-level) DC DC A: Performance Indexes of Serial Port under RS232 Mode: Data Throughput: 10KHz Input Impedance: 2.7KÙ @1W Supports Modem Control Signal: CTS, RTS, DSR, DTR, RI, DCD Isolation Voltage: 2500V Supports dry contact and wet contact input DC Level Characteristics of Connector: Compatible with the standard Level Characteristics of RS232 port Data Throughput: 10KHz Communication Distance: 30m/921.6bps (type-4 twisted-pair cable) Isolation Voltage: 2500V DC Baud Rate: 200bps~921.6Kbps ESD (electrostatic discharge) Protection: 2000V B: Performance Indexes of Serial Port 1 and 2 under RS422/RS485 Mode: DC TTL Digital Input Output Driving Capacity: 255 x standard RS422/RS485 transceiver TTL Digital Output Input Channel: 16-channel Baud Rate: 200bps~1.8432Mbps Output Channel: 16-channel Repeater Input Channel: DI0~DI15 Communication Distance: 30m/1.8432Mbps, 1200m/9600bps (shielded twisted-pair cable) General Specifications Terminal Resistance: 120Ù, adjustable via jumpers on PCB 2-bit Board ID setup function General Specifications Compatible with PCI104 Plus 2.2 specification Power Consumption: Typical +5V@300mA; max. +5V@500mA 4-bit Board ID setup function External Dimensions (L x H): 95.89mm x 90.17mm (3.775" x 3.550") Compatible with 3.3V and 5V general board design of PCI2.1 specification Operating Temperature: 0°C~60°C Signal Physical Connector: SCSI-100 female connector 1 1 Storage Temperature: -20°C~70°C Full-Size/Half-Size Full-Size/Half-Size Power Consumption: Typical +5V@450mA; max. +5V@500mA Slot CPU Cards Slot CPU Cards Operating Humidity: 5%~95% RH, (IEC 68-2-3), non-condensing External Dimensions (L x H): 175mm x 106mm (6.9" x 4.2") Operating Temperature: 0°C~60°C/PCI-8COM(B); wide-temperature: -40°C~80°C Ordering Information Storage Temperature: -20°C~70°C/PCI-8COM(B); wide-temperature: -45°C~85°C 2 Relative Humidity: 5%~95% RH, (IEC 68-2-3), non-condensing 2 Part Number Model Number Description SBC/Motherboard/ SBC/Motherboard/ Modules Modules 0090-003300 104P-HI24IO 8-bit opto-isolated digital input/output, 16-bit TTL digital input/output card Ordering Information 0060-001900 PCLD-880 DB-37 port industrial terminal board Part Number Model Number Description It is 16-channel single-ended/8-channel differential input/mixed input, 12-bit analog input channel, up to 100k 3 3 0060-002950/ PCI-8COM/PCI-8COM(B) 8-channel high-speed RS232 serial port card; its serial port channel 1 and 2 can be setup Embedded conversion rate; 1-channel 12-bit analog output; 8-channel digital input/output channel; 1-channel Embedded Box PC 104P-16MF12 Box PC programmable timer/counter 0060-002960 as RS422 or RS485 mode via jumpers 0080-001000 PCL-108DB9-1M Serial port cable, SCSI-100 connector to eight standard DB9 male connectors 0080-000940 PCL-101DB62-1M SCSI-100 to DB62 cable Specifications and Features 4 4 Network Application Network Application Computers Analog (DA) Output Computers Analog (AD) Input Channel: 1 Channel: 16-channel single-ended/8-channel differential/mixed Resolution: 12-bit Resolution: 12-bit Accuracy: 0.05% FSR FIFO Size: 4K x 16-bit 5 5 It is a 2-channel CAN2.0 wide-temperature PCI card with isolation. supporting CAN and PeliCAN Output Impedance: 0.81Ù Max. Sampling Rate: 100Ksps Industrial PC Industrial PC communication protocols PCI-I2CAN Driving Capacity: 3mA Input Voltage Range and Gain: Voltage Output Range: Gain: 1 2 4 8 0.5 0V~5V or 0V~10V (internal reference voltage -5V, -10V) Specifications and Features Unipolar 0~10V 0~5V 0~2.5V 0~1.25V NA 0~+ Vref V or Vref~0V (external reference voltage -10V Vref 10V) Bipolar ±5V ±2.5V ±1.25V ±0.625V ±10V 6 6 It provides 2 electrically isolated CAN channels with 2500V Isolation Voltage Settling Time: 26µs (from 0 to full scale range) HMI HMI Each channel offers independent CAN signal ground Accuracy: ±0.05%FSR (gain =1)(FSR: full scale range) Reference Source: Internal 5V or 10V; external -10V~+10V Supports CAN 2.0A (Basic CAN) and CAN2.0B (Peli CAN) communication protocols Input Impedance: 2MÙ/5pF CAN bus connector supports hot-swap Max. Input Overload Voltage (continuous): ±15V Programmable Timer/Counter CAN bus connector is fully compliant with ISO 11898-24V standard Input Overload Protection Voltage (instant): ±30Vp-p 7 7 Channel: 1 Unpowered connector will not affect the bus EVOC Rugged EVOC Rugged (peak-to-peak value) Input Level: TTL Series Series CAN connector Driving Capacity: More than 110 same connector nodes ESD Protection: 2000V DC Output Level: TTL The communication distance of normal shielded twisted-pair under 500Kbps speed is 100 meters Trigger Mode: Software trigger, external trigger, internal timing Resolution: 16-bit The communication distance of normal shielded twisted-pair under 5Kbps speed is 10 kilometers trigger supports both continuous and one-time trigger Max. Input Frequency: 20MHz Supports 5K~1Mbps standard baud rate, up to 1Mbps Interrupt Mode: Interrupt after AD conversion or interrupt when 8 8 MCC Series CAN connector signal with TVS protection for bus MCC Series FIFO is half-full Bus signal pins can withstand DC voltage of -36V~+36V TTL Digital Input TTL Digital Output I/O addresses are automatically assigned via PCI PnP Channel: 8 Channel: 8 Terminal resistance: 120Ù, adjustable via jumpers on PCB Input Level: TTL Output Level: TTL 9 9 General Specifications Chassis General Specifications Chassis 2-bit Board ID setup function CAN Physical Connector: 2 x DB9 male connector Compatible with PC104 Plus 2.0 specification 4-bit Board ID setup function Power Consumption: Typical +5V@470mA; max. +5V@500mA Power Consumption: Typical +5V@450mA; max. +5V@500mA 10 10 External Dimensions (L x H): 95.89mm x 90.17mm (3.775" x 3.550") External Dimensions (L x H): 143.5mm x 89.5mm Data Acquisition Data Acquisition Boards & Modules Operating Temperature: 0°C~60°C Boards & Modules Operating Temperature: -40°C~80°C Storage Temperature: -20°C~70°C Storage Temperature: -45°C~85°C Relative Humidity: 5%~95% RH, (IEC 68-2-3), (non-condensing) Relative Humidity: 5%~95% RH, (IEC 68-2-3), non-condensing Ordering Information 11 11 Accessories Accessories Ordering Information Part Number Model Number Description Part Number Model Number Description 0060-002940 104P-16MF12 16-channel single-ended/8-channel differential/mixed A/D input, 2-channel D/A output, 0060-003220 PCI-I2CAN 2-channel CAN2.0 wide-temperature PCI card with isolation 1-channel programmable timer/counter 0060-003050 PCLD-8753 IDC connector industrial terminal board, onboard CJC (cold-junction compensation) circuit 10-17 10-18 The images are for reference only, and all product specifications are subject to change without notice. The images are for reference only, and all product specifications are subject to change without notice.