ETASIS EFRP-3400S
Specifications
Cooling Fan
38x38x28 mm (SANYO DENKI)
Efficiency
65% minimum, at full load
Hold up Time
17mS minimum, at 80% load
Input Current
7-14A Max
Input Frequency
47-63 Hz
Input Range
100 to 240 VAC, ±10%
Input Voltage
100-240 VAC
Note
The +5 & +3.3 Volt total output shall not exceed 170 W. The +5, +3.3 & +12Volt total output shall not exceed 740W. Maximum continues total DC output power shout not exceed 750W. Maximum combined current for the 12 V outputs shall be 60A.
Operating Humidity
20 to 90 %
Operating Temperature
0 to 50 C
Output Load +12V1
Max Load 16A. Min Load 0.8A.
Output Load +12V2
Max Load 16A. Min Load 0.8A.
Output Load +12V3
Max Load 16A. Min Load 0.8A.
Output Load +12V4
Max Load 16A. Min Load 0.8A.
Output Load +3.3V
Max Load 30A. Min Load 1A
Output Load +5V
Max Load 30A. Min Load 1.5A
Output Load +5Vsb
Max Load 3A. Min Load 0.1A.
Output Load -12V
Max Load 0.5A. Min Load 0A.
Output Voltage +12V1
Regulation Load +5/-4%, Regulation Cross +5/-4%, Regulation Line ±1%, Output Ripple & Noise Max. 120mV.
Output Voltage +12V2
Regulation Load +5/-4%, Regulation Cross +5/-4%, Regulation Line ±1%, Output Ripple & Noise Max. 120mV.
Output Voltage +12V3
Regulation Load +5/-4%, Regulation Cross +5/-4%, Regulation Line ±1%, Output Ripple & Noise Max. 120mV.
Output Voltage +12V4
Regulation Load ±5/-4%, Regulation Cross +5/-4%, Regulation Line ±1%, Output Ripple & Noise Max. 120mV.
Output Voltage +3.3V
Regulation Load +5/-4%, Regulation Cross +5/-4%, Regulation Line ±1%, Output Ripple & Noise Max. 50mV.
Output Voltage +5V
Regulation Load +5/-3%, Regulation Cross +5/-3%, Regulation Line ±1%, Output Ripple & Noise Max. 60mV.
Output Voltage +5VSB
Regulation Load +5/-3%, Regulation Cross +5/-3%, Regulation Line ±1%, Output Ripple & Noise Max. 50mV.
Output Voltage -12V
Regulation Load ±9/-5%, Regulation Cross ±9/-5%, Regulation Line ±1%, Output Ripple & Noise Max. 50mV.
Output Watt
750W
Power Factor
0.95 minimum
Power Good
100 to 500 ms, TTL compatible
PSON (Remote ON/OFF)
TTL compatible
Features
- 750W Output Power
- Active Power Factor Correction
- Current Sharing on +5V, +3.3V and +12V
- Dimensions: 86(W) x 126.9(H) x 290(D) mm
- Front Panel LED to Indicate Power Status
- Meet 3U Rackmount System
- MTBF >100,000 Hours
- N+1 Redundant Configuration
- Over Current Protection
- Over Voltage Protection
- Power Fault Alarm Signals
- Remote DC Sense on +5V, +3.3V and +12V
- Short Circuit Protection
- Universal Power Input
Datasheet
Extracted Text
3U Type N+1 Redundant Power Supply ATX12V EFRP-3400S 750W+400W Output Power N+1 Redundant Configuration Meet 3U Rackmount System Dimensions: 127(W) x 86(H) x 290(D) mm Features: General Specifications: Compact size Module Design Input Range: 100 to 240 VAC, +/-10% PSII size Compatibilities Power Factor: 0.95 minimum Quick Removable Application Efficiency: 65% minimum, at full load Active power Factor Correction Hold up Time: 20mS minimum, at full load Universal Power Input PSON (Remote ON/OFF): TTL compatible signal Current Sharing on +5V, +3.3V & +12V Power Good: 100 to 500 ms, TTL compatible signal Remote DC Sense on +5V and +3.3V Operating Temperature: 0 to 50 ºC Power Fault Alarm Signals Operating Humidity: 20 to 90 % Front panel LED to Indicate Power Status Over Voltage Protection Agency Requirements: Over Current Protection Harmonic: Meet EN61000-3-2 standards Over Power Protection EMI/RFI: CE, FCC class B and CISPR class B Short Circuit Protection Safety: UL, cUL, CB, TUV, CCC MTBF >100,000 Hours Electrical Specifications: Regulation, Ripple & Noise: +12V1 +12V2 +12V3 Output +5V +3.3V +12V4 -12V 5Vsb Load Regulation +5%/-3% +5%/-4% +5%/-4% +5%/-4% +5%/-4% +5%/-4% +9%/-5% +5%/-3% Line Regulation ± 1% ± 1% ± 1% ± 1% ± 1% ± 1% ± 1% ± 1% Ripple & Noise 50mV 50mV 120mV 120mV 120mV 120mV 50mV 50mV Input and Output Ratings: Input Output Model No Voltage Frequency Current Watt Load +5V +3.3V +12V1 +12V2 +12V3 +12V4 -12V 5VSB 100-240 Max. 30A 30A 16A 16A 16A 16A 0.5A 3A EFRP-3400 47-63Hz 14-7A 800W VAC Min. 1.5A 1A 0.8A 0.8A 0.8A 0.8A 0A 0.1A Note 1: The +5 & +3.3 Volt total output shall not exceed 140 W. Note 2: The +5, +3.3 & +12Volt total output shall not exceed 670W. Note 3: Maximum continues total DC output power shout not exceed 780W. Note 4: Maximum combined current for the 12 V outputs shall be 58 A.
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the EFRP-3400S?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods